t*r
2 楼
首先俺们欣赏一下 Paul Anka 的 You Are My Destiny:
http://www.youtube.com/watch?v=SmuioXhzvN8
"You Are My Destiny"
-- 词曲作者及演唱:Paul Anka
You are my destiny
You share my reverie
You are my happiness
That's what you are
You have my sweet caress
You share my loneliness
You are my dream come true
That's what you are
Heaven and heaven alone
Can take your love from me
'Cause I'd be a fool
To ever leave you dear
And a fool I'd never be
You are my destiny
You share my reverie
You're more than life to me
That's what you are
You are my destiny
You share my reverie
You are my happiness
That's what you are
http://www.youtube.com/watch?v=SmuioXhzvN8
"You Are My Destiny"
-- 词曲作者及演唱:Paul Anka
You are my destiny
You share my reverie
You are my happiness
That's what you are
You have my sweet caress
You share my loneliness
You are my dream come true
That's what you are
Heaven and heaven alone
Can take your love from me
'Cause I'd be a fool
To ever leave you dear
And a fool I'd never be
You are my destiny
You share my reverie
You're more than life to me
That's what you are
You are my destiny
You share my reverie
You are my happiness
That's what you are
t*g
3 楼
现今是nwtowrk 1, 多一层switch
network 会不会有影响?switch 的 bandwidth 是咋分配的?
谢谢
network 会不会有影响?switch 的 bandwidth 是咋分配的?
谢谢
a*s
4 楼
要得
t*r
5 楼
这个我在跟人讨论的时候,正好做了个 FFT Spectrogram / Spectrum 的音准分析。
FFT Spectrogram / Spectrum 的图形见附件。
(插一句,所有这些图形都是用免费开源软件 Audacity 生成的,如何生成,我
会在后面跟帖说明)。
如何解读这个图,需要稍稍解释一下。
首先是区分人声和伴奏。每一个单独的乐器和人声,在 spectrogram 上,
基音和各阶上方泛音的图形,会形成独特重复的 pattern。观察这些
pattern 就可以区分人声和伴奏(其实可以精确到每个声部里单独的乐器)。
在这个图里,我选中 Paul Anka 在唱 “never be” 的那个 “be” 字。
观察 spectrogram 可知 “be” 字的基音大约是在 300 Hz 左右。
Paul Anka 的那个 “never be” 的 “be” 音唱的比较直,不那么 vibrato。
(总体上他的风格 vibrato 比较少)。但也有麻烦,他唱的那个音是用
略略向上的 pitch bend 的。(插一句,pitch bend 不属于走音,是
vocal nuance 的一种)。。。所以这个如何是好嘛。
没关系,很多 pitch bend 还是有一定的准则的。附件图里的那种微微向上的
pitch bend,一般而言是以结尾点的音高为准。。。所以俺就选了结尾点最高
的的一小段,plot spectrum 一测,能量峰值是 288 Hz,在 D4 的范围。。。
相对 294 Hz D4 的标准音高,数据上是唱低了 6 Hz。
不过问题又来了,尼玛测出来的这个客观偏差数据,到底如何对应到人的主管
感觉嘛(听歌是有血有肉的大活人,不是硅晶 Android 是不是?)。。。
好,客观数据有了。但这个 Hz 和 cent 差别到底如何对应到主观音准感觉
。。。请等下一贴。:-)
FFT Spectrogram / Spectrum 的图形见附件。
(插一句,所有这些图形都是用免费开源软件 Audacity 生成的,如何生成,我
会在后面跟帖说明)。
如何解读这个图,需要稍稍解释一下。
首先是区分人声和伴奏。每一个单独的乐器和人声,在 spectrogram 上,
基音和各阶上方泛音的图形,会形成独特重复的 pattern。观察这些
pattern 就可以区分人声和伴奏(其实可以精确到每个声部里单独的乐器)。
在这个图里,我选中 Paul Anka 在唱 “never be” 的那个 “be” 字。
观察 spectrogram 可知 “be” 字的基音大约是在 300 Hz 左右。
Paul Anka 的那个 “never be” 的 “be” 音唱的比较直,不那么 vibrato。
(总体上他的风格 vibrato 比较少)。但也有麻烦,他唱的那个音是用
略略向上的 pitch bend 的。(插一句,pitch bend 不属于走音,是
vocal nuance 的一种)。。。所以这个如何是好嘛。
没关系,很多 pitch bend 还是有一定的准则的。附件图里的那种微微向上的
pitch bend,一般而言是以结尾点的音高为准。。。所以俺就选了结尾点最高
的的一小段,plot spectrum 一测,能量峰值是 288 Hz,在 D4 的范围。。。
相对 294 Hz D4 的标准音高,数据上是唱低了 6 Hz。
不过问题又来了,尼玛测出来的这个客观偏差数据,到底如何对应到人的主管
感觉嘛(听歌是有血有肉的大活人,不是硅晶 Android 是不是?)。。。
好,客观数据有了。但这个 Hz 和 cent 差别到底如何对应到主观音准感觉
。。。请等下一贴。:-)
t*y
7 楼
多谢指点。
t*r
8 楼
谈到从音准偏差数据,对应地球人(整一堆弱智生物是不是?)的感觉,就不得
不提到JND (Just Noticeable Difference) 的概念。
wiki 告诉俺们,音高的 JND,理论上是(1.1)3 Hz for sine wave,(1.2)
1 Hz for complex wave(唱成方波发生器的同学,您悲催了),(2)10 cent,
之中 whichever is higher。
但上面这个一般准则,估计没包括 “纯律 vs 平律”,各类坑爹型 pitch bend,
“温柔式 vibrao” vs “上冲型vibrato”,更没有包括爵士里故意唱成 1/4 音
的感觉(我擦,让我对天大吼三声 “尼玛” 行不行?)
所以,俺的结论就是,对于俺这种快糙猛的,测量峰值偏差不超过半音,就算
过关!!!!!hia hia hia
(当然,话说回来。这个对于初学或者偶尔看一下,还是有意义的。至少知道
大致在啥地方)。
不提到JND (Just Noticeable Difference) 的概念。
wiki 告诉俺们,音高的 JND,理论上是(1.1)3 Hz for sine wave,(1.2)
1 Hz for complex wave(唱成方波发生器的同学,您悲催了),(2)10 cent,
之中 whichever is higher。
但上面这个一般准则,估计没包括 “纯律 vs 平律”,各类坑爹型 pitch bend,
“温柔式 vibrao” vs “上冲型vibrato”,更没有包括爵士里故意唱成 1/4 音
的感觉(我擦,让我对天大吼三声 “尼玛” 行不行?)
所以,俺的结论就是,对于俺这种快糙猛的,测量峰值偏差不超过半音,就算
过关!!!!!hia hia hia
(当然,话说回来。这个对于初学或者偶尔看一下,还是有意义的。至少知道
大致在啥地方)。
l*5
10 楼
最好是上推荐人的网页, 将其CV彩打出来, 限制在两页内, 只列上近两年的文章即
可。
可。
t*r
11 楼
当然,这个 “捷克式轻机枪 FFT 测音准” 嘛,虽然火力是猛烈,但是毕竟
轻机枪有点小重是不是,还有点小费子弹是不是。。。尼玛这次累坏俺了。。。
所以俺主要是忽悠大伙儿,俺自己一般不测,凑合听听就完事了。。。当然,
如果遇上网络对钢,那捎上 88 毫米火炮也不算重是不是?。。。sorry,
跑题了。。。:-P
下面言归正传,如何用免费且开源的 Audacity 生成这些
spectrogram / spectrum:
(1)首先在 edit -> preference -> spectrogram 里设参数。具体建议的
参数见附图。
(2)然后在 waveform 左边的名字下拉菜单里,把 “Waveform” 改成
“Spectrogram log(f)”。也见附图。
(3)如果要 plot spectrum,选中一段后,在菜单里选
“Analyze -> Plot Spectrum”,然后用鼠标在 spectrum 上移动,
自动会显示鼠标附近的峰值。
先到这里,大家有意见可以畅所欲言、自由发话嘛。。。
轻机枪有点小重是不是,还有点小费子弹是不是。。。尼玛这次累坏俺了。。。
所以俺主要是忽悠大伙儿,俺自己一般不测,凑合听听就完事了。。。当然,
如果遇上网络对钢,那捎上 88 毫米火炮也不算重是不是?。。。sorry,
跑题了。。。:-P
下面言归正传,如何用免费且开源的 Audacity 生成这些
spectrogram / spectrum:
(1)首先在 edit -> preference -> spectrogram 里设参数。具体建议的
参数见附图。
(2)然后在 waveform 左边的名字下拉菜单里,把 “Waveform” 改成
“Spectrogram log(f)”。也见附图。
(3)如果要 plot spectrum,选中一段后,在菜单里选
“Analyze -> Plot Spectrum”,然后用鼠标在 spectrum 上移动,
自动会显示鼠标附近的峰值。
先到这里,大家有意见可以畅所欲言、自由发话嘛。。。
t*g
12 楼
还有就是WIFi room B 没信号
t*y
13 楼
多谢指点。
z*n
14 楼
赞一个,弦影兄的理论分析太深奥了,像是天书,不懂啊:)
t*g
16 楼
switch 和switch 之间的连接要cross而不是straight?
布好的线是 straight的CAT5e
布好的线是 straight的CAT5e
d*u
18 楼
这个你不用担心了, 你家fios还没能够超过100M吧. switch 不会把你怎么拖慢的.
a*2
20 楼
不会,switch不会有分摊带宽的问题。比如100M的switch,每个口都是100M。要分摊带
宽的是集线器(hub),现在恐怕都绝迹了吧。
宽的是集线器(hub),现在恐怕都绝迹了吧。
g*t
22 楼
不用担心,内网数据传输都是硬件分流,不会影响速度,简单换成1000m switch,
t*g
27 楼
非常感谢大家的回答, 谢谢,
我回去发现接线的问题!!!! 如图, garage 的pots
晚上会上个照片, POTS 上 RJ45的线乱的一团被分了两路, 还有线到电话
I thought switches are easier to operate under this circumstances?
don't need to configure the router and IP address?
behind
【在 b*e 的大作中提到】
: why do you have to use switch?
: I prefer to buy multiple $20 routers and set them up as access points behind
: the main router.
我回去发现接线的问题!!!! 如图, garage 的pots
晚上会上个照片, POTS 上 RJ45的线乱的一团被分了两路, 还有线到电话
I thought switches are easier to operate under this circumstances?
don't need to configure the router and IP address?
behind
【在 b*e 的大作中提到】
: why do you have to use switch?
: I prefer to buy multiple $20 routers and set them up as access points behind
: the main router.
t*t
31 楼
so you have only 100M connection if cat5 cable is splitted. and your fios
modem has router function, and you have router-behind-router already.
what a mess.
【在 t******g 的大作中提到】
: 非常感谢大家的回答, 谢谢,
: 我回去发现接线的问题!!!! 如图, garage 的pots
: 晚上会上个照片, POTS 上 RJ45的线乱的一团被分了两路, 还有线到电话
: I thought switches are easier to operate under this circumstances?
: don't need to configure the router and IP address?
:
: behind
modem has router function, and you have router-behind-router already.
what a mess.
【在 t******g 的大作中提到】
: 非常感谢大家的回答, 谢谢,
: 我回去发现接线的问题!!!! 如图, garage 的pots
: 晚上会上个照片, POTS 上 RJ45的线乱的一团被分了两路, 还有线到电话
: I thought switches are easier to operate under this circumstances?
: don't need to configure the router and IP address?
:
: behind
t*g
36 楼
that was I afraid of... there is no router at POTS, just a simple splitter.
@@. actually, not even a splitter, just a bunch of messy striped wires......
.......
【在 t****t 的大作中提到】
: so you have only 100M connection if cat5 cable is splitted. and your fios
: modem has router function, and you have router-behind-router already.
: what a mess.
@@. actually, not even a splitter, just a bunch of messy striped wires......
.......
【在 t****t 的大作中提到】
: so you have only 100M connection if cat5 cable is splitted. and your fios
: modem has router function, and you have router-behind-router already.
: what a mess.
D*Z
38 楼
估计verizon已经提供路由器了,不然怎么出来两根线。。
如果你喜欢用自己的路由器,那就禁用verizon的路由功能,透明化
如果你喜欢用自己的路由器,那就禁用verizon的路由功能,透明化
t*t
43 楼
no. IP has nothing to do with physical port. one physical port can have
multiple IP address. you only need one router for the whole home network. IP
assignment is done by the built-in DHCP server in the router (it can be
separated, too).
same
【在 b*e 的大作中提到】
: a different ip address for each port.
: for switch behind router setup, all devices behind switch are using the same
: ip, right?
:
: you
multiple IP address. you only need one router for the whole home network. IP
assignment is done by the built-in DHCP server in the router (it can be
separated, too).
same
【在 b*e 的大作中提到】
: a different ip address for each port.
: for switch behind router setup, all devices behind switch are using the same
: ip, right?
:
: you
b*e
48 楼
Thx, good to know. Seems that previous understanding is incorrect.
IP
【在 t****t 的大作中提到】
: no. IP has nothing to do with physical port. one physical port can have
: multiple IP address. you only need one router for the whole home network. IP
: assignment is done by the built-in DHCP server in the router (it can be
: separated, too).
:
: same
IP
【在 t****t 的大作中提到】
: no. IP has nothing to do with physical port. one physical port can have
: multiple IP address. you only need one router for the whole home network. IP
: assignment is done by the built-in DHCP server in the router (it can be
: separated, too).
:
: same
t*t
53 楼
it depends on your router configuration. some configuration does allow WAN
access (in your last diagram, your room B PC is in "WAN" section of the
router).
you need to provide more information. some wire connection photo, all device
IPs, router "status" page, will all help.
【在 t******g 的大作中提到】
: @@
: oh, so complicated....
: 如果最后一张图片的情况下, 我room B 的 PC 能access 到外面那个router 吗
: 我现在是能的, 所以应该还是我原先贴的是正确的?
access (in your last diagram, your room B PC is in "WAN" section of the
router).
you need to provide more information. some wire connection photo, all device
IPs, router "status" page, will all help.
【在 t******g 的大作中提到】
: @@
: oh, so complicated....
: 如果最后一张图片的情况下, 我room B 的 PC 能access 到外面那个router 吗
: 我现在是能的, 所以应该还是我原先贴的是正确的?
t*g
55 楼
Thanks a lot, you made it very clear,
I will post some photos this afternoon, thank you
device
【在 t****t 的大作中提到】
: it depends on your router configuration. some configuration does allow WAN
: access (in your last diagram, your room B PC is in "WAN" section of the
: router).
: you need to provide more information. some wire connection photo, all device
: IPs, router "status" page, will all help.
I will post some photos this afternoon, thank you
device
【在 t****t 的大作中提到】
: it depends on your router configuration. some configuration does allow WAN
: access (in your last diagram, your room B PC is in "WAN" section of the
: router).
: you need to provide more information. some wire connection photo, all device
: IPs, router "status" page, will all help.
G*e
60 楼
Put your switch behind your router.You can easily find a gigabit 8-port
switch for ~$20. And as the other post said, you can also get another router
to increase the WiFi coverage if you have a bigger house.Wired is always
way better than WiFi though.
switch for ~$20. And as the other post said, you can also get another router
to increase the WiFi coverage if you have a bigger house.Wired is always
way better than WiFi though.
e*i
61 楼
你用的是fios from verizon?
大概情况可能是这样的:
你有一个westell 9100em系列的modem/router 二合一,这个无线似乎是G的,而且比较
suck的事这个路由好像dhcp有问题,用了一段后会导致无地址分配,很讨厌。很烦人的
是这个东西好像还没法接成bridge 模式用自己的路由。
我后来的解决办法是从ebay买了一个actiontec的modem/router二合一,这个
东西是可以接成bridge模式的,不过比较麻烦。如果开始没有release IP的话,需要打
电话给verizon reset 才能用新modem 获取IP.
大概情况可能是这样的:
你有一个westell 9100em系列的modem/router 二合一,这个无线似乎是G的,而且比较
suck的事这个路由好像dhcp有问题,用了一段后会导致无地址分配,很讨厌。很烦人的
是这个东西好像还没法接成bridge 模式用自己的路由。
我后来的解决办法是从ebay买了一个actiontec的modem/router二合一,这个
东西是可以接成bridge模式的,不过比较麻烦。如果开始没有release IP的话,需要打
电话给verizon reset 才能用新modem 获取IP.
t*g
62 楼
thanks, I got a 20 +tax gigabit switch from frys the day after xmas
https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
8BIelk2vX4a6xpWdfXm-8/edit?pli=1
end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
到POTS
到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
有10MB/s
谢谢大家, 等明天我发包子
google doc 希望能看
link 要copy paste 直接去好像不行
router
【在 G******e 的大作中提到】
: Put your switch behind your router.You can easily find a gigabit 8-port
: switch for ~$20. And as the other post said, you can also get another router
: to increase the WiFi coverage if you have a bigger house.Wired is always
: way better than WiFi though.
https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
8BIelk2vX4a6xpWdfXm-8/edit?pli=1
end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
到POTS
到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
有10MB/s
谢谢大家, 等明天我发包子
google doc 希望能看
link 要copy paste 直接去好像不行
router
【在 G******e 的大作中提到】
: Put your switch behind your router.You can easily find a gigabit 8-port
: switch for ~$20. And as the other post said, you can also get another router
: to increase the WiFi coverage if you have a bigger house.Wired is always
: way better than WiFi though.
t*g
63 楼
这样啊? 我现在是要放一个switch到另一个switch上面, 明天就试试, 不知道, ip
会不会乱
如果我的LAN的都是static IP, 多加一个switch 会不会有问题, 这是我担心的
【在 e*i 的大作中提到】
: 你用的是fios from verizon?
: 大概情况可能是这样的:
: 你有一个westell 9100em系列的modem/router 二合一,这个无线似乎是G的,而且比较
: suck的事这个路由好像dhcp有问题,用了一段后会导致无地址分配,很讨厌。很烦人的
: 是这个东西好像还没法接成bridge 模式用自己的路由。
: 我后来的解决办法是从ebay买了一个actiontec的modem/router二合一,这个
: 东西是可以接成bridge模式的,不过比较麻烦。如果开始没有release IP的话,需要打
: 电话给verizon reset 才能用新modem 获取IP.
会不会乱
如果我的LAN的都是static IP, 多加一个switch 会不会有问题, 这是我担心的
【在 e*i 的大作中提到】
: 你用的是fios from verizon?
: 大概情况可能是这样的:
: 你有一个westell 9100em系列的modem/router 二合一,这个无线似乎是G的,而且比较
: suck的事这个路由好像dhcp有问题,用了一段后会导致无地址分配,很讨厌。很烦人的
: 是这个东西好像还没法接成bridge 模式用自己的路由。
: 我后来的解决办法是从ebay买了一个actiontec的modem/router二合一,这个
: 东西是可以接成bridge模式的,不过比较麻烦。如果开始没有release IP的话,需要打
: 电话给verizon reset 才能用新modem 获取IP.
l*n
65 楼
房间A的PC能直接连房间B的switch吗?
t*g
68 楼
谢谢大家包子发了
t*g
69 楼
还有个问题就是如果8根线split 出来4根放到插头上,其他没用的4 根里面2根是电话
线接到电话的地方
会不会影响 performance?
类似这样的
线接到电话的地方
会不会影响 performance?
类似这样的
t*t
71 楼
你这个图好乱, 我好象看不懂...
【在 t******g 的大作中提到】
: thanks, I got a 20 +tax gigabit switch from frys the day after xmas
: https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
: 8BIelk2vX4a6xpWdfXm-8/edit?pli=1
: end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
: 我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
: 到POTS
: 到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
: jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
: 是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
: 的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
【在 t******g 的大作中提到】
: thanks, I got a 20 +tax gigabit switch from frys the day after xmas
: https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
: 8BIelk2vX4a6xpWdfXm-8/edit?pli=1
: end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
: 我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
: 到POTS
: 到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
: jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
: 是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
: 的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
g*u
72 楼
那估计都是通过路由了,你看一下各机器的IP就知道了
就是经过线转换可能上不了千兆,这个我不太清楚
【在 t******g 的大作中提到】
: thanks, I got a 20 +tax gigabit switch from frys the day after xmas
: https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
: 8BIelk2vX4a6xpWdfXm-8/edit?pli=1
: end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
: 我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
: 到POTS
: 到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
: jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
: 是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
: 的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
就是经过线转换可能上不了千兆,这个我不太清楚
【在 t******g 的大作中提到】
: thanks, I got a 20 +tax gigabit switch from frys the day after xmas
: https://docs.google.com/document/d/1C9xYJPrufZTazcgomvV70-
: 8BIelk2vX4a6xpWdfXm-8/edit?pli=1
: end up, 我都搞错了, 我当时就叫那个tech 多连一根线,回到
: 我以为是 ethernet, 最后其实还是MOCA! 直接电视coax 接到router/MOCA 然后回转
: 到POTS
: 到电话线然后通过那根蓝线到了楼上的center box。。。这种所谓的unkeyed voice
: jack 就是为了保证我每个屋都有电话信号, 如果没有是违反code吗?现在我的问题就
: 是, 如果装了switch, 应该要注意点啥, 线要用CAT6 吗?现在这个小的switch 后面
: 的PC(09年的电脑不知没有千兆)到HTPC(刚装的应该有1000M的ethernet)传文件只
相关阅读
啥叫高端机?海美迪上怎么看sambaLenovo outlet Yoga 13 $636笔记本的屏幕越来越坑爹,以后都是21:92颗同型号ivb的cpu的核心电压竟然不同什么原因?ASUS 8 gig port switch有丢where to buy computers with Windows 7?I want to build a linux file server水果就是牛提个醒,明天 Logitech MK560 $30@Frys视网膜屏请问lenovo outlet和lenovo官网卖的东西区别?【出售】Cooler Master HAF X 942 Full-Tower Chassis for $160奇怪的pogoplug启动问题WD的红盘有什么特色?有人用海美迪带千兆网卡的型号看局域网上的蓝光原盘的吗?我一个用了十四年的yahoo信箱现在每天收到500+个spam mailVPN网速很低,怎么办?还有CHDBITS邀请吗?新配了一个电脑,泥码的被电源风扇炒死了