h*l
2 楼
I blowed some bottles in childhood, not so successful though. :)
【在 g******e 的大作中提到】
: RT.
【在 g******e 的大作中提到】
: RT.
g*e
3 楼
Good enough. hehe.
Let me describe to you what I think the procedure is and please do comment on
my doings. So the equipment one should have is a torch, a glass tube and a
metal boat for the molten glass. After the glass melts, I could use some
pressurized gas to blow at one side of the tube and then after the glass forms
a bubble, I close the end of the tube and let it sit till it cools down. Is it
right?
Need your confirmation. :) //Bow.
【在 h****l 的大作中提到】
: I blowed some bottles in childhood, not so successful though. :)
Let me describe to you what I think the procedure is and please do comment on
my doings. So the equipment one should have is a torch, a glass tube and a
metal boat for the molten glass. After the glass melts, I could use some
pressurized gas to blow at one side of the tube and then after the glass forms
a bubble, I close the end of the tube and let it sit till it cools down. Is it
right?
Need your confirmation. :) //Bow.
【在 h****l 的大作中提到】
: I blowed some bottles in childhood, not so successful though. :)
h*l
4 楼
我其实不太懂的，我当时的做法是：
一大锅融化的玻璃水，粘性很大的。
一根长长的瓷管，一个两半的金属模子。
用长管在锅里面挑一块融化的玻璃，大小差不多就行。
挑出来的时候要斜向上，以免玻璃滴落。这头用嘴开始吹。
边吹边把这块玻璃放进打开的模子中，将模子合上，用力吹。
然后合紧模子，多余的玻璃自然被切掉。玻璃在铸铁模子里面
迅速冷却，拿出瓷管的时间要掌握好。就差不多了。
不过我吹出的玻璃瓶基本上都是漏的，外形能像瓶子
我就已经很满足了，呵呵
【在 g******e 的大作中提到】
: Good enough. hehe.
: Let me describe to you what I think the procedure is and please do comment on
: my doings. So the equipment one should have is a torch, a glass tube and a
: metal boat for the molten glass. After the glass melts, I could use some
: pressurized gas to blow at one side of the tube and then after the glass forms
: a bubble, I close the end of the tube and let it sit till it cools down. Is it
: right?
: Need your confirmation. :) //Bow.
一大锅融化的玻璃水，粘性很大的。
一根长长的瓷管，一个两半的金属模子。
用长管在锅里面挑一块融化的玻璃，大小差不多就行。
挑出来的时候要斜向上，以免玻璃滴落。这头用嘴开始吹。
边吹边把这块玻璃放进打开的模子中，将模子合上，用力吹。
然后合紧模子，多余的玻璃自然被切掉。玻璃在铸铁模子里面
迅速冷却，拿出瓷管的时间要掌握好。就差不多了。
不过我吹出的玻璃瓶基本上都是漏的，外形能像瓶子
我就已经很满足了，呵呵
【在 g******e 的大作中提到】
: Good enough. hehe.
: Let me describe to you what I think the procedure is and please do comment on
: my doings. So the equipment one should have is a torch, a glass tube and a
: metal boat for the molten glass. After the glass melts, I could use some
: pressurized gas to blow at one side of the tube and then after the glass forms
: a bubble, I close the end of the tube and let it sit till it cools down. Is it
: right?
: Need your confirmation. :) //Bow.
g*e
5 楼
Thank you very much!
Probably I will just buy a set from eBay and practise it. My idea is that I
could melt some colored bottles and make some post modern artsi stuff. :)
on
forms
Is it
【在 h****l 的大作中提到】
: 我其实不太懂的，我当时的做法是：
: 一大锅融化的玻璃水，粘性很大的。
: 一根长长的瓷管，一个两半的金属模子。
: 用长管在锅里面挑一块融化的玻璃，大小差不多就行。
: 挑出来的时候要斜向上，以免玻璃滴落。这头用嘴开始吹。
: 边吹边把这块玻璃放进打开的模子中，将模子合上，用力吹。
: 然后合紧模子，多余的玻璃自然被切掉。玻璃在铸铁模子里面
: 迅速冷却，拿出瓷管的时间要掌握好。就差不多了。
: 不过我吹出的玻璃瓶基本上都是漏的，外形能像瓶子
: 我就已经很满足了，呵呵
Probably I will just buy a set from eBay and practise it. My idea is that I
could melt some colored bottles and make some post modern artsi stuff. :)
on
forms
Is it
【在 h****l 的大作中提到】
: 我其实不太懂的，我当时的做法是：
: 一大锅融化的玻璃水，粘性很大的。
: 一根长长的瓷管，一个两半的金属模子。
: 用长管在锅里面挑一块融化的玻璃，大小差不多就行。
: 挑出来的时候要斜向上，以免玻璃滴落。这头用嘴开始吹。
: 边吹边把这块玻璃放进打开的模子中，将模子合上，用力吹。
: 然后合紧模子，多余的玻璃自然被切掉。玻璃在铸铁模子里面
: 迅速冷却，拿出瓷管的时间要掌握好。就差不多了。
: 不过我吹出的玻璃瓶基本上都是漏的，外形能像瓶子
: 我就已经很满足了，呵呵
h*l
6 楼
A crabby bottle IS a post modern art, I suppose :)
【在 g******e 的大作中提到】
: Thank you very much!
: Probably I will just buy a set from eBay and practise it. My idea is that I
: could melt some colored bottles and make some post modern artsi stuff. :)
:
: on
: forms
: Is it
【在 g******e 的大作中提到】
: Thank you very much!
: Probably I will just buy a set from eBay and practise it. My idea is that I
: could melt some colored bottles and make some post modern artsi stuff. :)
:
: on
: forms
: Is it
相关阅读
怎么查自己的文章被引用多少次欢迎参加北京化工大学赴明尼苏达大学人才招聘会！！[为自己找工作] 土木与环境工程专业H1B下周生效，但有急事要回国一段时间 (转载)paper helpR&D Positions in Combustion and Fluid Dynamics (Boston, MA)哪个公司可以做镀金pattern的玻璃片？西雅图附近的燃烧/流体/传热方面的工作。看来这个版人还是挺多的哈大家对中国的净水药剂市场有什么看法？建筑材料/结构的防耐火设计振荡的设计原理？Master/PhD Univ. of Newcastleheing, 申请了吗?NCEES的学历评估热烈祝贺土木工程版开版!!!大家都去捧场啊!!!!! (转载)申请开设“土木工程”版哪位前辈了解美国的车辆工程专业，属机械专业。请谈一下问问化工的master好找工作吗导师是不是最好不要选印度人？