y*n
3 楼
1. find the model number of the router.
2. google the default/factory password for the router. write the password
down.
3. connect the computer to the router's lan port.
4. boot the computer and open command prompt, then enter command ipconfig.
5. read the ip address. usually it looks like 192.168.x.yyy. note down the
number x.
6. launch a browser, i.e. ie. In address bar, type 192.168.x.1. hit enter.
7. Use the login and password found on step 2 to login.
8. follow the instruction from GUI to finish setup.
9. change default password.
2. google the default/factory password for the router. write the password
down.
3. connect the computer to the router's lan port.
4. boot the computer and open command prompt, then enter command ipconfig.
5. read the ip address. usually it looks like 192.168.x.yyy. note down the
number x.
6. launch a browser, i.e. ie. In address bar, type 192.168.x.1. hit enter.
7. Use the login and password found on step 2 to login.
8. follow the instruction from GUI to finish setup.
9. change default password.
i*l
4 楼
lol,are you sure you are in the right thread?
【在 y*****n 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 1. find the model number of the router.
: 2. google the default/factory password for the router. write the password
: down.
: 3. connect the computer to the router's lan port.
: 4. boot the computer and open command prompt, then enter command ipconfig.
: 5. read the ip address. usually it looks like 192.168.x.yyy. note down the
: number x.
: 6. launch a browser, i.e. ie. In address bar, type 192.168.x.1. hit enter.
: 7. Use the login and password found on step 2 to login.
: 8. follow the instruction from GUI to finish setup.
【在 y*****n 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 1. find the model number of the router.
: 2. google the default/factory password for the router. write the password
: down.
: 3. connect the computer to the router's lan port.
: 4. boot the computer and open command prompt, then enter command ipconfig.
: 5. read the ip address. usually it looks like 192.168.x.yyy. note down the
: number x.
: 6. launch a browser, i.e. ie. In address bar, type 192.168.x.1. hit enter.
: 7. Use the login and password found on step 2 to login.
: 8. follow the instruction from GUI to finish setup.
相关阅读
请问 intel 320 系列 SSD 如何?微软什么时候开Windows 8的路演???请帮忙看看,我的ssd c300需要装sata驱动吗?谁有二手的或者用坏的 my book live 卖?请推荐一个WIN7 下 1T 硬盘 无损分区软件吧刷了新的固件发现能看PPSdd-wrt 杯具啊,居然不显示静态主机和端口转发有必要为玩Diablo3配个U2410吗?装机配置主板进水了Win7 做小型服务器,开FTP和local的网络硬盘共享,要用什么软件?再次悲催了.免费提供MicroCenter代购Intel i7 2600 cpu真是服了到底用了SSD有啥好啊?这台笔记本值得升级内存吗?尼玛,刚定了centric的刹车片,今天Monroe就MIRSapphire Radeon HD6770 $83.5 AR 值不值得跳?[求助] 求路由推荐tablet手写记笔记的话用哪个软件好?dell d430 windows8开机时间