忘了是哪个Firmware了,Dual Band用Client Bridge,可以用一个Band relay,另一个 Band broadcast。就是两个AP之间用5G relay,2.4G 链接客户。或者倒过来。 速度上把WDS排出屎来。
S*A
49 楼
RP 看了下,就是用 MAC 地址 proxy 那个吧。 你给的 Link 里面就有。 Uses MAC address translation (MAT) (proxy ARP) (not compatible with some applications and protocols that depend on MAC addresses) (potential ARP problems) * RP 是如果你没法控制其中一个路由器。如果你可以控制两头的路由器, 没有必要用 RP,这个在 Openwrt 是不推荐的,因为 ARP problem。
主路由 ap wds 次路由 Scan 添加wwan client wds 手动加wlan ap wds 都做了 但最后一步bridge 不会弄。。
★ 发自iPhone App: ChineseWeb 1.0.1
【在 S*A 的大作中提到】 : 替你高兴。我也就是用过一些 TPLINK 的路由还挺喜欢的。 : 基于 Broeadcomm 的路由个人不太喜欢,由于那个 wl : 驱动不开源又不稳定的问题。你喜欢就好。 : 如果是 Openwrt 配 WDS, 在你的主router WIFI (4300) 配置需要 : 改 AP mode with WDS。 : 连接图大概是这样: : Internet - modem -- 4300 [AP mode with WDS] : 841N 要做4步。 : 1. change 841N IP address to not conflict with 4300 : e.g. (192.168.1.2 instead of 192.168.1.1)
S*A
66 楼
你是说 turn off DHCP on lan 不会吗? Network->Interfaces. LAN -> edit 下面有个选项 DHCP: Ignore interface 【X】 help Disable DHCP for this interface. 在 “ignore Interface” 上面选中。 “Save & Apply”就可以了。
外部连接就算有 300M, 这个也不解决房间 wifi 覆盖问题。 大房子什么的就是需要多个 AP 接入点才罩得住。 如果你有多个 router 做 AP 接入点,连接 WDS 是不需要另外花 钱的,可以跑起来看看效果如何。有需要再升级 router 之间的 back line。 如果router之间有 line of sight, 做个 AC 的互联也不是不可能 的。虽然我没有这么试过。 器材要发烧总是没有尽头的。对我来说够用就好。