烂尾工程 - 未名空间MITBBS历史存档

国际科技财经博客移民网络热点娱乐民生时事公众号

Redian新闻

>未名空间

>Living

烂尾工程

烂尾工程# Living

p*p2012-09-28 07:09

1 楼

长话短说, 碰到了烂尾工程. stucco已经上了Sakrete Base & Brown Stucco. 不知道
下一步如何进行. 据说需要先上Brown Stucco, 再上Finish Stucco做Texture.
是否可直接上上Finish Stucco做Texture?
如果需要先上Brown Stucco,可以上同样的Sakrete Base & Brown Stucco吗?
现在的情况见图. 图上见到的是第一层stucco, 用的是Sakrete Base & Brown Stucco.
图放大后, 可看清周围原来的Texture. 需要match texture, 请指教如何match.
谢谢!

p*p2012-09-28 07:09

2 楼

自己顶一下.
大侠们, 快来指教. 明天周末, 准备自己干了. 现在还不知道如何做呢.

Stucco.

【在 p*******p 的大作中提到】

: 长话短说, 碰到了烂尾工程. stucco已经上了Sakrete Base & Brown Stucco. 不知道
: 下一步如何进行. 据说需要先上Brown Stucco, 再上Finish Stucco做Texture.
: 是否可直接上上Finish Stucco做Texture?
: 如果需要先上Brown Stucco,可以上同样的Sakrete Base & Brown Stucco吗?
: 现在的情况见图. 图上见到的是第一层stucco, 用的是Sakrete Base & Brown Stucco.
: 图放大后, 可看清周围原来的Texture. 需要match texture, 请指教如何match.
: 谢谢!

t*e2012-09-28 07:09

3 楼

这个我知道，干过。你这个只需要上1/4 厚的FINIFH COAT了。到STUCCO SUPPLY店电
买几包STUCCO，告诉小二要FINISH COAT。告诉他面积，再选择一个接近的颜色。一
包一包混合。每包加一小包颜色料混匀。用SQUARE的镗子，一下一下上去，动
作要快。注意是，不是糊。糊的太平太厚没有了质地。估计网上有YOUTUBE，可
以先看看。
MATCH是不好搞的。解决办法是把整面墙括一遍。希望你成功！

Stucco.

【在 p*******p 的大作中提到】

p*p2012-09-28 07:09

4 楼

终于有大侠回了, 多谢tite!
现在stucco被scratch了,是否在上FINIFH COAT前,再来一层stucco磨平(brown),然后再
上FINIFH COAT? 据说这叫3 coat stucco system (scratch, brown and finish).
finish后我要repaint, 所以不需要选FINISH COAT的颜色吧?
想象不出来的动作,请解释.

【在 t**e 的大作中提到】

: 这个我知道，干过。你这个只需要上1/4 厚的FINIFH COAT了。到STUCCO SUPPLY店电
: 买几包STUCCO，告诉小二要FINISH COAT。告诉他面积，再选择一个接近的颜色。一
: 包一包混合。每包加一小包颜色料混匀。用SQUARE的镗子，一下一下上去，动
: 作要快。注意是，不是糊。糊的太平太厚没有了质地。估计网上有YOUTUBE，可
: 以先看看。
: MATCH是不好搞的。解决办法是把整面墙括一遍。希望你成功！
:
: Stucco.

t*e2012-09-28 07:09

5 楼

It looks to me you already had a brown coat. If not, Yes! No need to repaint
. The color will be added to the finish coat. Hua means scratch by the
surface fast and leave an uneven layer of stucco, which is both the last
coat and your texture. The ket to perform this thing is to put a thin layer
on the tool, whichever you use, strach it evenly and fast. You may want to
scratch the whole wall so they match. I hear people spray stucco, but I have
never done it before. I guess it is like spray texture, which is easy. Go
to Harbor freight tools, get a $15 texture gun. I assume you already own an
aor compressor like the 8-gallon one from Harbor freight tools.

【在 p*******p 的大作中提到】

: 终于有大侠回了, 多谢tite!
: 现在stucco被scratch了,是否在上FINIFH COAT前,再来一层stucco磨平(brown),然后再
: 上FINIFH COAT? 据说这叫3 coat stucco system (scratch, brown and finish).
: finish后我要repaint, 所以不需要选FINISH COAT的颜色吧?
: 想象不出来的动作,请解释.

p*p2012-09-28 07:09

6 楼

why did you think "It looks to me you already had a brown coat"? is it OK
that brown coat stucco is a same as the scratch coat stucco? (right now the
scratch coat has used Sakrete Base & Brown Stucco.)

repaint
layer
to
have
an

【在 t**e 的大作中提到】

: It looks to me you already had a brown coat. If not, Yes! No need to repaint
: . The color will be added to the finish coat. Hua means scratch by the
: surface fast and leave an uneven layer of stucco, which is both the last
: coat and your texture. The ket to perform this thing is to put a thin layer
: on the tool, whichever you use, strach it evenly and fast. You may want to
: scratch the whole wall so they match. I hear people spray stucco, but I have
: never done it before. I guess it is like spray texture, which is easy. Go
: to Harbor freight tools, get a $15 texture gun. I assume you already own an
: aor compressor like the 8-gallon one from Harbor freight tools.

t*e2012-09-28 07:09

7 楼

根据你自己的说法，你的STUCCO Sakrete Base & Brown Stucco 已经有BASE 和BRWON两
层。不过不平倒是真的。
这样，我的方法你可能一下搞不好。你可否这样: 用已有Sakrete Base & Brown
Stucco把
不平的地方搞平，再按下面录像的drag finish method搞 (which is similar to
what I did):
http://www.youtube.com/watch?NR=1&v=2mrnv5GLxl8&feature=endscre
再说一遍: 不要用Sakrete Base & Brown Stucco。去STUCCO 店，买FINISH STUCCO加
小包颜色。告诉小二面积，他会告诉你买几包。要想好看，总面墙全搞。半天时间。

the

【在 p*******p 的大作中提到】

: why did you think "It looks to me you already had a brown coat"? is it OK
: that brown coat stucco is a same as the scratch coat stucco? (right now the
: scratch coat has used Sakrete Base & Brown Stucco.)
:
: repaint
: layer
: to
: have
: an

p*p2012-09-28 07:09

8 楼

多谢tite的耐心指教.再给把把关.
1) Sakrete White Stucco Finish Coat http://www.homedepot.com/SAKRETE/h_d1/N-25ecodZ5yc1vZ1b0/R-100632101/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=stucco&storeId=10051
已买好finish coat stucco, 如上, 可否.
2) 可否完成brown coat后就上finish coat without waiting several days?

BRWON两

【在 t**e 的大作中提到】

: 根据你自己的说法，你的STUCCO Sakrete Base & Brown Stucco 已经有BASE 和BRWON两
: 层。不过不平倒是真的。
: 这样，我的方法你可能一下搞不好。你可否这样: 用已有Sakrete Base & Brown
: Stucco把
: 不平的地方搞平，再按下面录像的drag finish method搞 (which is similar to
: what I did):
: http://www.youtube.com/watch?NR=1&v=2mrnv5GLxl8&feature=endscre
: 再说一遍: 不要用Sakrete Base & Brown Stucco。去STUCCO 店，买FINISH STUCCO加
: 小包颜色。告诉小二面积，他会告诉你买几包。要想好看，总面墙全搞。半天时间。
:

t*e2012-09-28 07:09

9 楼

白色是吗? 意思是还要再上漆是吗? 如果是，不需要等。注意BROWN COAT不要太光。
用埽把埽埽，利于FINISH COAT沾合。
看了人家刮的方式了吗?这是短刮。我学的是长刮。到工地看了看学的。比这快。

【在 p*******p 的大作中提到】

: 多谢tite的耐心指教.再给把把关.
: 1) Sakrete White Stucco Finish Coat http://www.homedepot.com/SAKRETE/h_d1/N-25ecodZ5yc1vZ1b0/R-100632101/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=stucco&storeId=10051
: 已买好finish coat stucco, 如上, 可否.
: 2) 可否完成brown coat后就上finish coat without waiting several days?
:
: BRWON两