x*n
2 楼
车库门打不开,灯也不亮了。 看了一下,跳闸了。
把闸恢复了,还是没有电。这回没有跳闸反应(闸是通的)。
怎么检查?
thanks!
把闸恢复了,还是没有电。这回没有跳闸反应(闸是通的)。
怎么检查?
thanks!
b*r
3 楼
那还可以卖高买低啊。。
俺烧的ERX在水上。。明天有个dip让我cover就好了。。
俺烧的ERX在水上。。明天有个dip让我cover就好了。。
D*r
4 楼
昨天刚有人问过,检查车库的GFCI有没有红灯
F*Q
17 楼
then, the only thing left is GFCI.
yes, a GFCI can shutdown a lot of outlets if they are connected in series (
in most cases, they do, this way, you can protect many outlets by using a
small number GFCIs). look around your house, reset all GFCIs you manage to
find find
【在 x**********n 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: Yes. I did it this way a couple times. Still no luck:(
:
: from
: ★ 发自iPhone App: ChineseWeb 8.6
x*n
18 楼
my garage is detached from the main house (the breaker is in the house).
there is only one GFCI outlet in the garage. two CFL lights, garage door,
they are all dead now.
garage door openers are hard wired(not plugged to the outlet).
the GFCIs in my houses are fine.
need help, thanks!
【在 F***Q 的大作中提到】![](/moin_static193/solenoid/img/up.png)
:
: then, the only thing left is GFCI.
: yes, a GFCI can shutdown a lot of outlets if they are connected in series (
: in most cases, they do, this way, you can protect many outlets by using a
: small number GFCIs). look around your house, reset all GFCIs you manage to
: find find
there is only one GFCI outlet in the garage. two CFL lights, garage door,
they are all dead now.
garage door openers are hard wired(not plugged to the outlet).
the GFCIs in my houses are fine.
need help, thanks!
【在 F***Q 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
:
: then, the only thing left is GFCI.
: yes, a GFCI can shutdown a lot of outlets if they are connected in series (
: in most cases, they do, this way, you can protect many outlets by using a
: small number GFCIs). look around your house, reset all GFCIs you manage to
: find find
s*a
19 楼
http://www.askmehelpdesk.com/electrical-lighting/circuit-breake
【在 x**********n 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: my garage is detached from the main house (the breaker is in the house).
: there is only one GFCI outlet in the garage. two CFL lights, garage door,
: they are all dead now.
: garage door openers are hard wired(not plugged to the outlet).
: the GFCIs in my houses are fine.
: need help, thanks!
【在 x**********n 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: my garage is detached from the main house (the breaker is in the house).
: there is only one GFCI outlet in the garage. two CFL lights, garage door,
: they are all dead now.
: garage door openers are hard wired(not plugged to the outlet).
: the GFCIs in my houses are fine.
: need help, thanks!
x*n
20 楼
Did it in the right way. Not working
★ 发自iPhone App: ChineseWeb 8.6
【在 s***a 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: http://www.askmehelpdesk.com/electrical-lighting/circuit-breake
★ 发自iPhone App: ChineseWeb 8.6
【在 s***a 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: http://www.askmehelpdesk.com/electrical-lighting/circuit-breake
m*3
21 楼
那就是说你的整个Garage根本就没电?那儿的电是从贵宅引过去的,那你能找着到底是
那个breaker吗?不太懂,不过Breaker嗝屁的可能性有多大?好换不?
那个breaker吗?不太懂,不过Breaker嗝屁的可能性有多大?好换不?
i*e
22 楼
拉到车房的电线是走屋顶还是走地下?
x*n
24 楼
Checked. One garage outdoor outlet, but not GFCI.
The GFCI in garage "reset" can't be push down now, could that be the trouble
maker?
have
★ 发自iPhone App: ChineseWeb 8.6
★ 发自iPhone App: ChineseWeb 8.6
【在 F***Q 的大作中提到】![](/moin_static193/solenoid/img/up.png)
:
: do you have any outdoor GFCIs? if you do, reset them. I still feel you have
: the best chance there.
The GFCI in garage "reset" can't be push down now, could that be the trouble
maker?
have
★ 发自iPhone App: ChineseWeb 8.6
★ 发自iPhone App: ChineseWeb 8.6
【在 F***Q 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
:
: do you have any outdoor GFCIs? if you do, reset them. I still feel you have
: the best chance there.
F*Q
25 楼
trouble
of course. if you can not reset, that means the trip condition is still on,
and the circuit is still disconnected.
【在 x**********n 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: Checked. One garage outdoor outlet, but not GFCI.
: The GFCI in garage "reset" can't be push down now, could that be the trouble
: maker?
:
: have
: ★ 发自iPhone App: ChineseWeb 8.6
: ★ 发自iPhone App: ChineseWeb 8.6
F*Q
27 楼
just to make sure, your GFCI reset button is popped up, right? if the top of
your reset button is flush to the faceplate, that means it has already been
reset.
in the first scenario, if you push it, and it comes back to the trip
position, then, likely your circuit is still short somewhere. disconnect all
appliances from the downstream outlets and try again.
you can also connect one of your table lamps to the GFCI outlet while you
playing with the reset button, in a successfully reset, the lamp will turn
on; otherwise, it may flash once.
【在 x**********n 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: What to do?
: There is short connected somewhere? Or disconnected?
: Change the GFCI?
:
: ,
: ★ 发自iPhone App: ChineseWeb 8.6
x*n
28 楼
when I pressed it down, it popped up to the faceplate without any click/
unsmooth feeling.
I unplugged the garage door openers, tried again, still not working. other
than two lights(日光灯), there's no appliances connected.
connected table lamp, it didn't flash, not on also.
do I need to change the GFCI outlet first?
thanks!
of
been
all
【在 F***Q 的大作中提到】![](/moin_static193/solenoid/img/up.png)
:
: just to make sure, your GFCI reset button is popped up, right? if the top of
: your reset button is flush to the faceplate, that means it has already been
: reset.
: in the first scenario, if you push it, and it comes back to the trip
: position, then, likely your circuit is still short somewhere. disconnect all
: appliances from the downstream outlets and try again.
: you can also connect one of your table lamps to the GFCI outlet while you
: playing with the reset button, in a successfully reset, the lamp will turn
: on; otherwise, it may flash once.
unsmooth feeling.
I unplugged the garage door openers, tried again, still not working. other
than two lights(日光灯), there's no appliances connected.
connected table lamp, it didn't flash, not on also.
do I need to change the GFCI outlet first?
thanks!
of
been
all
【在 F***Q 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
:
: just to make sure, your GFCI reset button is popped up, right? if the top of
: your reset button is flush to the faceplate, that means it has already been
: reset.
: in the first scenario, if you push it, and it comes back to the trip
: position, then, likely your circuit is still short somewhere. disconnect all
: appliances from the downstream outlets and try again.
: you can also connect one of your table lamps to the GFCI outlet while you
: playing with the reset button, in a successfully reset, the lamp will turn
: on; otherwise, it may flash once.
相关阅读
5 year ARM or 30 year fixed对着cul de sac的房子算不算路冲buyer agent 收买家任何费用么?Can I have a 10% lowes coupom白墙壁上的污点该怎么清呀?房间和客厅的角落总是散发怪味Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Dri想把主餐厅变小孩活动室邻居养了一群鸡怎么办?How to remove credit collectionwin7 封 zuomengren 在 Living 版LA地区 装修 谁能推荐一家好的可以自己装后院的PlayGround吗?如何除掉yard 很多葱chives? Thanks.FIRST TIME WALL PAINTING, A BIG SUCCESSFULL!房主老太太去世后的房子能买么?Comcast来装网络竟然说我们的cable不能用到底要不要买地震险 (转载)哪里买门帘?没有地下室的房子有啥主要缺点?