Redian新闻
>
木地板reducer的高度如何调整
avatar
木地板reducer的高度如何调整# Living
K*n
1
木地板铺好了,和另一个地面之间的高度差最多1/4 英寸。看到卖的reducer,两个平
面高度差都要比这个大。我想每家情况不同,卖的reducer确实选项有限,肯定有变通
的办法,但是没有搜到,都是一般化的reducer安装方法,假设前提是高度差就是和已
有的reducer高度差一样的。
不知道有没有高度差flexible的,或者如何自己动手调整这个高度差?
谢谢!
avatar
k*e
2
同问,我家的是地板比tile厚,有一点高度查,也没找到适合的呢。还有就是
baseboard怎么装?试了下,地板那面高,瓷砖这边由于低,下面有一条缝,不知道怎
么办?
avatar
x*u
3
If you want something that fit just right, you will have to get a strip of
hardwood, and use router to get the shape you want.
Otherwise, you get something like this and lay it down as flat as possible.
http://www.homedepot.com/p/TrafficMASTER-2-in-x-3-ft-Oak-Carpet
For the baseboard question, you need to measure how long the baseboard is
over the floor side, then cut a slice off the baseboard. Then it would sit
nicely over both sides. Or you could get some quarter round trim piece to
cover the seam.
avatar
K*n
4
谢谢指教。昨天去home depot,店员说仔细点,拿table saw搞定……

sit

【在 x****u 的大作中提到】
: If you want something that fit just right, you will have to get a strip of
: hardwood, and use router to get the shape you want.
: Otherwise, you get something like this and lay it down as flat as possible.
: http://www.homedepot.com/p/TrafficMASTER-2-in-x-3-ft-Oak-Carpet
: For the baseboard question, you need to measure how long the baseboard is
: over the floor side, then cut a slice off the baseboard. Then it would sit
: nicely over both sides. Or you could get some quarter round trim piece to
: cover the seam.

avatar
k*e
5
谢谢三楼的详细回答。楼主你的弄好了吗?
avatar
s*e
6
对的,用table saw,自己做一个简易的jig,用clamp把reducer固定在jig上,要保证切
平整就要调整reducer切割角度(比如用小木条)
相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。