TOUCH PAD看有的中文PDF乱码这个有人解决了吗？# PDA - 掌中宝
l*e
1 楼
不是所有的都是乱码，但有的是就已经很让人不舒服了，
没有找到直接解决这个问题的贴子，但是看到好多地方
都有个安装越南字体的贴子，来问一声是这是照这个方法
把有用的中文字体装进去就好了？
但是字体要用什么的呢？与WINDOWS的通用吗？感觉
WEBOS是基于LINUX的，这个不太憝，谁为说说。
1. Make sure your TouchPad has enough battery life, greater than 50%. Plug
your TP into your computer or laptop, and set to USB mode.
2. Download this Unicode Fonts, and extract it as is to your TP drive on the
computer. Note: Again extract as is directly to the HP TouchPad drive in
your computer, not any other folder.
3. Disconnect USB mode by safely remove hardware, but leave the wire still
connected. Turn on Developer Mode on your TP, and open WeOSQuickInstall.jar.
You should know how to do this already, if not read up on it before
proceeding!
4. Click on Tools, then Linux Commandline. Copy this command without quotes
"mount -o remount,rw /" and paste to the window that appeared after you
click on Linux Commandline, then hit enter on your laptop or pc. Do not do
CTRL+V for paste as it will not work, you have to physically right click and
select paste!
5. Copy this command without quotes "cp media/internal/HPbackupunicodefonts/
*.* usr/share/fonts", and hit enter on your laptop or pc. Again, do not do
CTRL+V, as I know a lot of people would love to do just that. Wait a few
seconds until it finish and you see two lines displaying "[email protected]"
Then you're done.
6. Remove the usb cord from your TP, clear cache out from your browser on
your TouchPad (you should know how to do this already too, if not search
here or google ) Reboot your TP completely, not luna restart, but complete
restart it.
7. Enjoy
没有找到直接解决这个问题的贴子，但是看到好多地方
都有个安装越南字体的贴子，来问一声是这是照这个方法
把有用的中文字体装进去就好了？
但是字体要用什么的呢？与WINDOWS的通用吗？感觉
WEBOS是基于LINUX的，这个不太憝，谁为说说。
1. Make sure your TouchPad has enough battery life, greater than 50%. Plug
your TP into your computer or laptop, and set to USB mode.
2. Download this Unicode Fonts, and extract it as is to your TP drive on the
computer. Note: Again extract as is directly to the HP TouchPad drive in
your computer, not any other folder.
3. Disconnect USB mode by safely remove hardware, but leave the wire still
connected. Turn on Developer Mode on your TP, and open WeOSQuickInstall.jar.
You should know how to do this already, if not read up on it before
proceeding!
4. Click on Tools, then Linux Commandline. Copy this command without quotes
"mount -o remount,rw /" and paste to the window that appeared after you
click on Linux Commandline, then hit enter on your laptop or pc. Do not do
CTRL+V for paste as it will not work, you have to physically right click and
select paste!
5. Copy this command without quotes "cp media/internal/HPbackupunicodefonts/
*.* usr/share/fonts", and hit enter on your laptop or pc. Again, do not do
CTRL+V, as I know a lot of people would love to do just that. Wait a few
seconds until it finish and you see two lines displaying "[email protected]"
Then you're done.
6. Remove the usb cord from your TP, clear cache out from your browser on
your TouchPad (you should know how to do this already too, if not search
here or google ) Reboot your TP completely, not luna restart, but complete
restart it.
7. Enjoy