去店里看看成品closet是怎么做的,琢磨一下就知道自己怎么弄了。。。 I would buy 2-side clear finished plywood for material. Personally I don't like particle board or MDF. Try to google local hardwood stores which should have much more selection than HD or Lowes and cheaper. If you are in bay area, CA, I can give you a list of stores. They may also have 2-side clear finished birch or maple plywood shelfs with slightly less than 1ft width. It saves your time/money for doing clear finishing on hardwood plywood. For cutting, circu
you can hide nails or screws by driving them into the woods and then filling the hole and then touch up with finishing. BTW, you can also make shelfs with adjustable height...
【在 g*****9 的大作中提到】 : You can build something like this, 比较方便实用美观, you will need a router. : : in
g*9
33 楼
Sorry, no, I can ask my friend to take one, he found this online, we build it for his closet, we used glass shelf.
【在 R**R 的大作中提到】 : Do you have a whole picture? : : router.
g*9
34 楼
This system is very good, I used it everywhere when I am lazy. Plus all you need is a screw driver to do the install. If you closet is not very wide, you only need 2 verticle support. I found this brand (bought from container store) to be the best in term of sturdiness and price. http://www.elfa.com/
【在 g*****9 的大作中提到】 : Sorry, no, I can ask my friend to take one, he found this online, we build : it for his closet, we used glass shelf.
g*9
36 楼
Yes, it smell so good when we are woring with it. Also like your shoe rack a lot, can you provide a write up? Thanks, Actually if you can post a picture with the top shelf removed should be good enough for me to figure out (I kind of guessed) I am thinking about building one just like yours with MDF and spray paint it , what do you think? Did you use plywood and laminate the edge, my laminate trimmer broke, so I will try to avoid that right now if possible. Also how do you use the corner space,
【在 R**R 的大作中提到】 : very nice color of the wood. : Is it ceder?
R*R
37 楼
老美用ceder做closet, 就是因为味道,除虫。国内用樟木。 我是用4个图中A的木板,把横板卡住的。斜着放进去。横板是1/2”厚的furniture grade plywood. 因为刷的是白漆,所以也不有laminate the edge。 不常用的鞋,塞corner.
good it be
【在 g*****9 的大作中提到】 : Yes, it smell so good when we are woring with it. : Also like your shoe rack a lot, can you provide a write up? Thanks, : Actually if you can post a picture with the top shelf removed should be good : enough for me to figure out (I kind of guessed) : I am thinking about building one just like yours with MDF and spray paint it : , what do you think? : Did you use plywood and laminate the edge, my laminate trimmer broke, so I : will try to avoid that right now if possible. : Also how do you use the corner space,
g*9
38 楼
Did you buy A or cut with a dado blade yourself? Did you use a band saw to cut the horizontal pieces? So horizontal pieces go in 1 at a time or all of them at the same time? Thanks
【在 R**R 的大作中提到】 : 老美用ceder做closet, 就是因为味道,除虫。国内用樟木。 : 我是用4个图中A的木板,把横板卡住的。斜着放进去。横板是1/2”厚的furniture : grade plywood. 因为刷的是白漆,所以也不有laminate the edge。 : 不常用的鞋,塞corner. : : good : it : be
R*R
39 楼
Cuting with dado blade myself. I have a ratio arm saw. All of them go in at the same time.
【在 g*****9 的大作中提到】 : Did you buy A or cut with a dado blade yourself? : Did you use a band saw to cut the horizontal pieces? : So horizontal pieces go in 1 at a time or all of them at the same time? : Thanks
g*9
40 楼
How did you do the nice inside and outside corners?
R*R
41 楼
Router. Make one first, and then using this one as template to do others. This picture shows how to set it up.
【在 g*****9 的大作中提到】 : How did you do the nice inside and outside corners?
g*9
42 楼
Ok, that is exactly what I thought. Thank you so much for making it so clear.
【在 R**R 的大作中提到】 : Router. : Make one first, and then using this one as template to do others. : This picture shows how to set it up.
g*9
43 楼
I was thinking about clamping all pieces together and cut them with a band saw, what do you think? I also plan to mount the cut out piece from above on the door, any good suggestion? Also what is the distance between each board in your design? Do you think it is a good idea to tilt the boards a little to provide better view and access? I am also thinking about running a string of clear christmas light just under each shelf with a door activated switch to provide some light, is that overkill? I a
【在 g*****9 的大作中提到】 : Ok, that is exactly what I thought. : Thank you so much for making it so clear.
R*R
44 楼
1. I was thinking about clamping all pieces together and cut them with a band saw, what do you think? Band saw is hard to cut small curve and a finished cutting. 不平。 I use a hole saw to cut the corner first, then circular saw to cut straight line. You can make one first, then use this one as template to cut others with band saw. Make sure about 1/16” bigger than the first. Finally use first one as template and a router to finish. 2. I also plan to mount the cut out piece from above on the door
【在 g*****9 的大作中提到】 : I was thinking about clamping all pieces together and cut them with a band : saw, what do you think? : I also plan to mount the cut out piece from above on the door, any good suggestion? : Also what is the distance between each board in your design? : Do you think it is a good idea to tilt the boards a little to provide better : view and access? : I am also thinking about running a string of clear christmas light just : under each shelf with a door activated switch to provide some light, is that : overkill? : I a
g*9
45 楼
1. I was thinking about clamping all pieces together and cut them with a band saw, what do you think? Band saw is hard to cut small curve and a finished cutting. 不平。 I use a hole saw to cut the corner first, then circular saw to cut straight line. You can make one first, then use this one as template to cut others with band saw. Make sure about 1/16” bigger than the first. Finally use first one as template and a router to finish. I was planning to use a scroll saw for this, but was trying to ge
f*i
46 楼
you can just use razor blade to deal with the edge veneer. After a couple of practice, it is not hard to get a pretty good looking
good it be
【在 g*****9 的大作中提到】 : Yes, it smell so good when we are woring with it. : Also like your shoe rack a lot, can you provide a write up? Thanks, : Actually if you can post a picture with the top shelf removed should be good : enough for me to figure out (I kind of guessed) : I am thinking about building one just like yours with MDF and spray paint it : , what do you think? : Did you use plywood and laminate the edge, my laminate trimmer broke, so I : will try to avoid that right now if possible. : Also how do you use the corner space,
R*R
47 楼
Should be ok.
straight and proven
【在 g*****9 的大作中提到】 : 1. I was thinking about clamping all pieces together and cut them with a : band saw, what do you think? : Band saw is hard to cut small curve and a finished cutting. 不平。 : I use a hole saw to cut the corner first, then circular saw to cut straight : line. You can make one first, then use this one as template to cut others : with band saw. Make sure about 1/16” bigger than the first. Finally use : first one as template and a router to finish. : I was planning to use a scroll saw for this, but was trying to ge