new CM10 version came out today. from verygreen: New cwm early4 that does partitions aligned at 2M (other than the first boot partition). Also dims the display a bit and "hides" /factory and /rom just in case. No stability improvement on bad cards for me, but please give it a try, esp to ensure it actually works for first install. Additionally a new experimental build that I am not fully comfortable promoting to the first post. Not much changed there really, converted back to source-build kernel (but less of a leap than before - to 3.0.31 from omapzoom), suspend seems to be a hit and miss with this one, but it's similarly a hit and miss with the binary one from B&N too, so give it a try and share your experiences please. Correspondingly a bit newer gfx drivers too. Added qrngd to feed from urandom, to see if it makes any sort of difference for anybody in terms of lag. cm-10-20130107-UNOFFICIAL-ovation.zip
looks like the root cause of reboot has been found. Hopefully the problem will be fixed in the next CM10 version. also from verygreen: Oh, and btw I found out why stock hangs at 99% with our sdcard in, they compiled it with 3 partitions limit, so we'll need to do something with our partition layout if we really want to remain compatible with stock
g*n
8 楼
我的很少重启,不过可能是因为我用的app不多
m*t
9 楼
I flashed this one last night and experienced the first reboot. While I was asleep, the damn thing rebooted, hang at 99%, illuminating the whole room.
boot just esp
【在 x*****o 的大作中提到】 : new CM10 version came out today. from verygreen: : New cwm early4 that does partitions aligned at 2M (other than the first boot : partition). Also dims the display a bit and "hides" /factory and /rom just : in case. : No stability improvement on bad cards for me, but please give it a try, esp : to ensure it actually works for first install. : Additionally a new experimental build that I am not fully comfortable : promoting to the first post. : Not much changed there really, converted back to source-build kernel (but : less of a leap than before - to 3.0.31 from omapzoom), suspend seems to be a
【在 x*****o 的大作中提到】 : new CM10 version came out today. from verygreen: : New cwm early4 that does partitions aligned at 2M (other than the first boot : partition). Also dims the display a bit and "hides" /factory and /rom just : in case. : No stability improvement on bad cards for me, but please give it a try, esp : to ensure it actually works for first install. : Additionally a new experimental build that I am not fully comfortable : promoting to the first post. : Not much changed there really, converted back to source-build kernel (but : less of a leap than before - to 3.0.31 from omapzoom), suspend seems to be a
【在 x*****o 的大作中提到】 : new CM10 version came out today. from verygreen: : New cwm early4 that does partitions aligned at 2M (other than the first boot : partition). Also dims the display a bit and "hides" /factory and /rom just : in case. : No stability improvement on bad cards for me, but please give it a try, esp : to ensure it actually works for first install. : Additionally a new experimental build that I am not fully comfortable : promoting to the first post. : Not much changed there really, converted back to source-build kernel (but : less of a leap than before - to 3.0.31 from omapzoom), suspend seems to be a
I am wondering if low level format would help. I have sandisk class4 32GB card, it took me almost an hour to complete format when I uncheck the "quick format" checkbox in the format dialog. I am also waiting for the new build(without reboot). I found when the boot stops at 99%, the area near microSD slot is quite warm after the device hangs on at 99% for a while.
c*y
27 楼
你用的啥膜?
【在 d*****0 的大作中提到】 : 我用了两张卡都会重启。。。
p*r
28 楼
I just did use its latest version CWM early4, and build 0107. Immediately after I flashed, I only installed a few common Apps that I use, and reboot the HD+, and then run Antutu. The Antutu Benchmark is 9316 with IO 799. Database 555 SD card write (4.1MB/s) 41 SD card read (>50MB/s) 203 My SD card is Sandisk class 4 32GB from staples. I am going to leave it overnight to see if it will have reboot problem.