OBi 不工作后，手动UPDATE 方法!(转）# PDA - 掌中宝
l*i
1 楼
网上找了好久才找到这个，转一下方便大家！
Manual Update Instructions:
1. Download the above linked file to your computer.
http://fw.obihai.com/OBi110-1-3-0-2886.fw 这个是OBi100 或者OBi110的
2. Access the web page of the OBi device (OBi via Internet/WAN Port):
From a phone attached to the PHONE port of the OBi dial * * * 1
The IP address of the OBi will be read to you
Open a new browser window on your PC and enter the IP address of the OBi.
E.g. 192.168.1.110
When prompted, enter "admin" for username and "admin" for password.
If you have previously changed the password, use that instead of "
admin."
OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN
port IP (Gateway) address is: 192.168.10.1
OBi202/OBi302 Note: To access the integral web page via the WAN port, you
may need to enable WAN access. To do this, from the connected phone dial **
*0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable -
Press 1 to save.
3. Now that you have accessed the OBi web page, go to the "System
Management" - "Device Update" page. From there, "Browse" to the firmware
file you just downloaded above and click Update.
4. Wait for the OBi to restart (approx. 30-60 seconds) and you will be good
to go.
Manual Update Instructions:
1. Download the above linked file to your computer.
http://fw.obihai.com/OBi110-1-3-0-2886.fw 这个是OBi100 或者OBi110的
2. Access the web page of the OBi device (OBi via Internet/WAN Port):
From a phone attached to the PHONE port of the OBi dial * * * 1
The IP address of the OBi will be read to you
Open a new browser window on your PC and enter the IP address of the OBi.
E.g. 192.168.1.110
When prompted, enter "admin" for username and "admin" for password.
If you have previously changed the password, use that instead of "
admin."
OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN
port IP (Gateway) address is: 192.168.10.1
OBi202/OBi302 Note: To access the integral web page via the WAN port, you
may need to enable WAN access. To do this, from the connected phone dial **
*0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable -
Press 1 to save.
3. Now that you have accessed the OBi web page, go to the "System
Management" - "Device Update" page. From there, "Browse" to the firmware
file you just downloaded above and click Update.
4. Wait for the OBi to restart (approx. 30-60 seconds) and you will be good
to go.