h*g
2 楼
大杂烩,丸子香肠韩国水饺乌冬面
n*y
4 楼
除了卸锈了的螺丝钉之外,还有啥用?
g*9
7 楼
钻 = drill
impact drill = hammer drill (they usually have a hammer/impact mode you can
turn on and off)
impact driver is not a hammer drill and its not a regular drill. It even
looks different with a smaller stubby profile and a hex socket in place of
the chuck.
Ref:
http://www.builderbill-diy-help.com/hammer_drill.html
http://www.thewoodwhisperer.com/articles/drills-vs-hammer-drill
【在 R**R 的大作中提到】
: Is it hammer drill to drill through concrete?
impact drill = hammer drill (they usually have a hammer/impact mode you can
turn on and off)
impact driver is not a hammer drill and its not a regular drill. It even
looks different with a smaller stubby profile and a hex socket in place of
the chuck.
Ref:
http://www.builderbill-diy-help.com/hammer_drill.html
http://www.thewoodwhisperer.com/articles/drills-vs-hammer-drill
【在 R**R 的大作中提到】
: Is it hammer drill to drill through concrete?
R*R
8 楼
Your mean the impact drill is hammer drill which is totally different from
impact driver.
can
【在 g*****9 的大作中提到】
: 钻 = drill
: impact drill = hammer drill (they usually have a hammer/impact mode you can
: turn on and off)
: impact driver is not a hammer drill and its not a regular drill. It even
: looks different with a smaller stubby profile and a hex socket in place of
: the chuck.
: Ref:
: http://www.builderbill-diy-help.com/hammer_drill.html
: http://www.thewoodwhisperer.com/articles/drills-vs-hammer-drill
impact driver.
can
【在 g*****9 的大作中提到】
: 钻 = drill
: impact drill = hammer drill (they usually have a hammer/impact mode you can
: turn on and off)
: impact driver is not a hammer drill and its not a regular drill. It even
: looks different with a smaller stubby profile and a hex socket in place of
: the chuck.
: Ref:
: http://www.builderbill-diy-help.com/hammer_drill.html
: http://www.thewoodwhisperer.com/articles/drills-vs-hammer-drill
g*9
9 楼
Yes and No.
To most people here impact drill = hammer drill.
To a professional to you, there is little difference between them.
Impact drill have more torque than regular hammer drill (which have more
power)
Both have a impact function that can be turned on and off.
Impact driver is a driver, but I am guessing you can use it as a drill too
with the right bit.
Ref:
http://www.impactdrill.org/index.html
【在 R**R 的大作中提到】
: Your mean the impact drill is hammer drill which is totally different from
: impact driver.
:
: can
To most people here impact drill = hammer drill.
To a professional to you, there is little difference between them.
Impact drill have more torque than regular hammer drill (which have more
power)
Both have a impact function that can be turned on and off.
Impact driver is a driver, but I am guessing you can use it as a drill too
with the right bit.
Ref:
http://www.impactdrill.org/index.html
【在 R**R 的大作中提到】
: Your mean the impact drill is hammer drill which is totally different from
: impact driver.
:
: can
w*r
10 楼
不对吧,impact和hammer只是发力的机制和方向不同,用了感觉区别还是蛮大的
【在 g*****9 的大作中提到】
: Yes and No.
: To most people here impact drill = hammer drill.
: To a professional to you, there is little difference between them.
: Impact drill have more torque than regular hammer drill (which have more
: power)
: Both have a impact function that can be turned on and off.
: Impact driver is a driver, but I am guessing you can use it as a drill too
: with the right bit.
: Ref:
: http://www.impactdrill.org/index.html
【在 g*****9 的大作中提到】
: Yes and No.
: To most people here impact drill = hammer drill.
: To a professional to you, there is little difference between them.
: Impact drill have more torque than regular hammer drill (which have more
: power)
: Both have a impact function that can be turned on and off.
: Impact driver is a driver, but I am guessing you can use it as a drill too
: with the right bit.
: Ref:
: http://www.impactdrill.org/index.html
R*R
11 楼
Still confuse about impact drill.
I have both of hammer drill and impact drivers.
Hammer drill: the impact is up and down movement during the turn. This is
why call hammer drill.
The impact driver: the impact is during the turn. There are no up/down
movement.
Is it right?
【在 g*****9 的大作中提到】
: Yes and No.
: To most people here impact drill = hammer drill.
: To a professional to you, there is little difference between them.
: Impact drill have more torque than regular hammer drill (which have more
: power)
: Both have a impact function that can be turned on and off.
: Impact driver is a driver, but I am guessing you can use it as a drill too
: with the right bit.
: Ref:
: http://www.impactdrill.org/index.html
I have both of hammer drill and impact drivers.
Hammer drill: the impact is up and down movement during the turn. This is
why call hammer drill.
The impact driver: the impact is during the turn. There are no up/down
movement.
Is it right?
【在 g*****9 的大作中提到】
: Yes and No.
: To most people here impact drill = hammer drill.
: To a professional to you, there is little difference between them.
: Impact drill have more torque than regular hammer drill (which have more
: power)
: Both have a impact function that can be turned on and off.
: Impact driver is a driver, but I am guessing you can use it as a drill too
: with the right bit.
: Ref:
: http://www.impactdrill.org/index.html
w*r
12 楼
g*9
14 楼
Read this site, they explain, drill, impact drill, hammer drill and impact
driver.
http://www.impactdrill.org/index.html
Click on upper right corner to see other.
【在 R**R 的大作中提到】
: 为什么又有impact drill? 它是怎么动的?
driver.
http://www.impactdrill.org/index.html
Click on upper right corner to see other.
【在 R**R 的大作中提到】
: 为什么又有impact drill? 它是怎么动的?
R*R
15 楼
Thanks.
【在 g*****9 的大作中提到】
: Read this site, they explain, drill, impact drill, hammer drill and impact
: driver.
: http://www.impactdrill.org/index.html
: Click on upper right corner to see other.
【在 g*****9 的大作中提到】
: Read this site, they explain, drill, impact drill, hammer drill and impact
: driver.
: http://www.impactdrill.org/index.html
: Click on upper right corner to see other.
相关阅读