Inside Acrobat Plugin ( in c code), can I get the client locale? I can not find Acrobat Plugin API to do this. Any windows API and MAC API (the plugin run in both platform) I can use to retrieve locale? Thanks
ASHostEncoding AVAppGetLanguageEncoding (void) Returns the ASHostEncoding corresponding to Acrobat's current locale setting. void* PDGetHostEncoding (void) Indicates what kind of host encoding a system uses.
not to
【在 c*******9 的大作中提到】 : Inside Acrobat Plugin ( in c code), can I get the client locale? I can not : find Acrobat Plugin API to do this. : Any windows API and MAC API (the plugin run in both platform) I can use to : retrieve locale? : Thanks
s*y
17 楼
本本有四个USB口,如何实现同时驱动四个摄像头一起工作 想搞个简易监控,,,呵呵
j*h
18 楼
发信人: jeffh (Jeffh), 信区: CivilEngineering 标 题: Re: Can Anyone Recommend Any Study Material for SE Exam? 发信站: BBS 未名空间站 (Fri Oct 14 13:05:47 2011, 美东) The SE exam is a fixed passing rate exam depending on the state you take the exam. The passing rate for April 2011 SE exam is 27%: http://www.ncees.org/Exams/SE_exam.php. By the way, just a friendly reminder, before California eliminates its use of the state-specific SE exam, CA SE test is not just a simple test. The board of CA is very serious about this test. The seismic-resisting design in CA is totally different from those seismic-resisting designs in east coast and China. In addition, the CA SE test is a speeding test. If you are not well prepared, usually it is hard to finish even 60% of the questions in time. So far, for those out-of-state exam takers, the pass rate is pretty low. For those who did not have work experience in CA, the only one I know is one of my friend, a Ph.D. whose dissertation was Experimental and Analytical Research of a seismic-resisting connection. It saved him lots of time in preparing the seismic-resisting connection design for the CA SE test. In short, the best way to pass the national 16-hour Structural exam is to chose a state where no seismic-and/or-high-wind-resisting designs are required, in addition to no heavy snow load calculation required. So that you could compete with those local engineers who have very limit experience in seismic-and/or-high-wind-resisting designs, in addition to heavy snow load calculation, to ensure that you could use less time to prepare the SE exam, but still within the 27% to 35% lucky guys of the exam takers in the state in that year you take your exam. http://www.ncees.org/Exams/SE_exam.php SE pass rate The pass rate is from the April 2011 exam administration. It reflects the percentage of candidates, among those attempting both SE exam components, who attained acceptable results on both components. Exam First-time takers Repeat takers SE 27% n/a Reporting scores SE exam results are typically released to the licensing boards 10–12 weeks after the exam. Depending on your state, you will be notified of your exam result either online through your My NCEES account or via postal mail from your state licensing board. Each candidate will receive a component result for the component(s) attempted. The result will reflect the candidate's performance on both the morning and afternoon sections; the candidate's combined performance on both sections must demonstrate minimum competency. Candidates who do not attain an acceptable result on a component will receive diagnostic reports for the morning and afternoon sections of that component. These diagnostic reports will indicate subject areas of relative strength and weakness. SE exam SE exam specifications Friday morning breadth—vertical forces (with design standards) Friday afternoon depth—vertical forces (with design standards) Saturday morning breadth—lateral forces (with design standards) Saturday afternoon depth—lateral forces (with design standards) A two-day exam with separate, 8-hour components The new, 16-hour SE exam was first offered in April 2011, replacing the separate Structural I and II exams. The new SE exam is a breadth and depth exam offered in two components on successive days. The 8-hour Vertical Forces (Gravity/Other) and Incidental Lateral component is offered only on Friday and focuses on gravity loads and lateral earth pressures. The 8-hour Lateral Forces (Wind/Earthquake) component is offered only on Saturday and focuses on wind/earthquake loads. Each component of the SE exam has a breadth (morning) module and a depth ( afternoon) module. Examinees must take the breadth module of each component and one of the two depth modules in each component. Breadth modules (morning sessions): These modules contain questions covering a comprehensive range of structural engineering topics. All questions are multiple-choice. Depth modules (afternoon sessions): These modules focus more closely on a single area of practice in structural engineering. Examinees must choose either buildings or bridges. Examinees must work the same topic area on both components. That is, if buildings is the topic area chosen in the Vertical Forces component, then buildings must be the topic area chosen in the Lateral Forces component. All questions are constructed response (essay). What is required to pass? Examinees must obtain acceptable results on both 8-hour components. They are not required to obtain acceptable results on both components in a single exam administration period—a candidate can sit for and obtain acceptable results on one component one year and then sit for and obtain acceptable results on the second component at a later date. Some state boards may impose a five year window for obtaining acceptable results on both components. Reference materials The SE exam is an open-book exam. You are allowed to bring reference materials to the exam, provided they are bound and remain bound during the exam. Loose paper may be bound with ring binders, brads, plastic snap binders, spiral-bound notebooks, and screw posts—but not with staples. Sticky notes and flags are permitted only when they remain attached to book pages. Scoring The morning sections of both components, which consist of multiple-choice items, are machine graded. A percentage of answer sheets are manually verified to ensure accuracy. The afternoon sections of both components consist of constructed response (essay) items; these responses are graded by teams of subject matter experts using an agreed-upon solution and scoring plan. Each response is graded by two subject matter experts; a third grader is used when needed.
material good?
s*t
19 楼
there is nothing else le besides live shows and criminials
【在 g***y 的大作中提到】 : ft,你跟我跟的竟然一摸一样,哦,我还多一个house,和so you think you can : dance
T*3
20 楼
这招夸美女也学会了?
【在 K*a 的大作中提到】 : 奔根
c*9
21 楼
Thank you!
not to
【在 c*******9 的大作中提到】 : Inside Acrobat Plugin ( in c code), can I get the client locale? I can not : find Acrobat Plugin API to do this. : Any windows API and MAC API (the plugin run in both platform) I can use to : retrieve locale? : Thanks
【在 j***h 的大作中提到】 : 发信人: jeffh (Jeffh), 信区: CivilEngineering : 标 题: Re: Can Anyone Recommend Any Study Material for SE Exam? : 发信站: BBS 未名空间站 (Fri Oct 14 13:05:47 2011, 美东) : The SE exam is a fixed passing rate exam depending on the state you take the : exam. The passing rate for April 2011 SE exam is 27%: http://www.ncees.org/Exams/SE_exam.php. : By the way, just a friendly reminder, before California eliminates its use : of the state-specific SE exam, CA SE test is not just a simple test. The : board of CA is very serious about this test. The seismic-resisting design : in CA is totally different from those seismic-resisting designs in east : coast and China. In addition, the CA SE test is a speeding test. If you
j*y
24 楼
I missed the Bro & sis last sunday, damn! so the French man came and wowed every Walker except mom...I really like this season, even Nora's tears can't turn me away. It's hard to keep up with so many TVs ...
Hi Xentar, Looks like ASHostEncoding hostEncoding = AVAppGetLanguageEncoding (); I am getting back an integer, where can I find the mapping between the int value and the local (like en_us ...). Thanks ...
not use to ;
【在 c*******9 的大作中提到】 : Inside Acrobat Plugin ( in c code), can I get the client locale? I can not : find Acrobat Plugin API to do this. : Any windows API and MAC API (the plugin run in both platform) I can use to : retrieve locale? : Thanks
z*i
26 楼
这个人说的全部可以忽视,全是负面意见 不是裁人就是衰退 居然还是版主
【在 a*******r 的大作中提到】 : what's your point? : : the
t*u
27 楼
小猪,你看的东西都是女人看的
X*r
28 楼
Oh I misunderstood you. That function will get you the code page (encoding). To get the language name, use ASBool AVAppGetLanguageWithParams (AVAppLanguageParams params)
【在 c*******9 的大作中提到】 : Hi Xentar, : Looks like : ASHostEncoding hostEncoding = AVAppGetLanguageEncoding (); : I am getting back an integer, where can I find the mapping between the : int value and the local (like en_us ...). : Thanks ... : : not : use to : ;
a*r
29 楼
i guess he is an old fart in this industry. the guy does know some stuff, but also full of bulls..t i believe he just want to earn 伪币 for being 版主
Thanks Xentar I try this out: AVAppLauguageParams langParams; ASBool abool = AVAppGetLanguageWithParams( langParams ); somehow, abool is 0 and langParams does not get set new value, still the initial value... Any ideas?
(encoding).
【在 X****r 的大作中提到】 : Oh I misunderstood you. That function will get you the code page (encoding). : To get the language name, use : ASBool AVAppGetLanguageWithParams (AVAppLanguageParams params)
j*h
32 楼
In short, the best way to pass the national 16-hour Structural exam is to chose a state where no seismic-and/or-high-wind-resisting designs are required, in addition to no heavy snow load calculation required. So that you could compete with those local engineers who have very limit experience in seismic-and/or-high-wind-resisting designs, in addition to heavy snow load calculation, to ensure that you could use less time to prepare the SE exam, but still within the 27% to 35% lucky guys of the exam takers in the state in that year you take your exam. http://www.ncees.org/Exams/SE_exam.php SE pass rate The pass rate is from the April 2011 exam administration. It reflects the percentage of candidates, among those attempting both SE exam components, who attained acceptable results on both components. Exam First-time takers Repeat takers SE 27% n/a
【在 a*******r 的大作中提到】 : what's your point? : : the
a*i
33 楼
你家里有Fx么?
【在 s****t 的大作中提到】 : there is nothing else le besides live shows and criminials
【在 c*******9 的大作中提到】 : Thanks Xentar : I try this out: : AVAppLauguageParams langParams; : ASBool abool = AVAppGetLanguageWithParams( langParams ); : somehow, abool is 0 and langParams does not get set new value, still the : initial value... : Any ideas? : : (encoding).
s*t
35 楼
I don't care about the state to take the SE. Whatever the seismic, wind loads, we need to get them over. You don't need worry about that. If you have recommendations for the studying materials, please let us know. I think the question is simple. Thanks.
http://www.ncees.org/Exams/SE_exam.php SE pass rates by component The following pass rates from the October 2011 exam administration reflect the percentage of candidates who attained acceptable results by component. To pass the SE exam, acceptable results must be attained on both components. Exam First-time takers Repeat takers SE Vertical Component 47% 30% SE Lateral Component 35% 25%
发信人: jeffh (Jeffh), 信区: CivilEngineering 标 题: Re: Any recommended referance book for 16-hour SE exam? 发信站: BBS 未名空间站 (Tue Nov 29 15:32:05 2011, 美东) In short, the best way to pass the national 16-hour Structural exam is to chose a state where no seismic-and/or-high-wind-resisting designs are required, in addition to no heavy snow load calculation required. So that you could compete with those local engineers who have very limit experience in seismic-and/or-high-wind-resisting designs, in addition to heavy snow load calculation, to ensure that you could use less time to prepare the SE exam, but still within the 27% to 35% lucky guys of the exam takers in the state in that year you take your exam. http://www.ncees.org/Exams/SE_exam.php SE pass rate The pass rate is from the April 2011 exam administration. It reflects the percentage of candidates, among those attempting both SE exam components, who attained acceptable results on both components. Exam First-time takers Repeat takers SE 27% n/a
【在 j***h 的大作中提到】 : 发信人: jeffh (Jeffh), 信区: CivilEngineering : 标 题: Re: Can Anyone Recommend Any Study Material for SE Exam? : 发信站: BBS 未名空间站 (Fri Oct 14 13:05:47 2011, 美东) : The SE exam is a fixed passing rate exam depending on the state you take the : exam. The passing rate for April 2011 SE exam is 27%: http://www.ncees.org/Exams/SE_exam.php. : By the way, just a friendly reminder, before California eliminates its use : of the state-specific SE exam, CA SE test is not just a simple test. The : board of CA is very serious about this test. The seismic-resisting design : in CA is totally different from those seismic-resisting designs in east : coast and China. In addition, the CA SE test is a speeding test. If you
t*o
48 楼
我是2009年4月份同时考过的Structural I and II。那时的考试可能和现在不太一样。 Structural II是8小时,总共4道题。复习的时候主要用了以下资料,希望对你有帮助: 1- Seismic and Wind Forces by Alan Williams 2- SERM by PPI 3- Building code book: IBC2006,ASCE7-05, AISC360, AISC341, ACI318, ACI530 and NDS2005. 规范一定要熟悉,尤其是IBC和ASCE7-05,你必须很熟悉才行。
http://www.ncees.org/Exams/SE_exam.php October SE pass rates by component The following pass rates from the October 2011 exam administration reflect the percentage of candidates who attained acceptable results by component. To pass the SE exam, acceptable results must be attained on both components. Exam First-time takers Repeat takers SE Vertical Component 47% 30% SE Lateral Component 35% 25% April 2011 SE pass rate The pass rate is from the April 2011 exam administration. It reflects the percentage of candidates, among those attempting both SE exam components, who attained acceptable results on both components. Exam First-time takers Repeat takers SE 27% n/a
【在 j***h 的大作中提到】 : http://www.ncees.org/Exams/SE_exam.php : SE pass rates by component : The following pass rates from the October 2011 exam administration reflect : the percentage of candidates who attained acceptable results by component. : To pass the SE exam, acceptable results must be attained on both components. : Exam First-time takers Repeat takers : SE Vertical Component 47% 30% : SE Lateral Component 35% 25% : : 发信人: jeffh (Jeffh), 信区: CivilEngineering
j*h
50 楼
http://www.pels.ca.gov/applicants/oct10stats.shtml October 2010 PE and LS Examination Statistics National Structural Tested 192 Passed 93 Pass % 48% Failed 99 Fail % 52% State-Specific Structural Tested 297 Passed 86 Pass % 29% Failed 211 Fail % 71% Cutscore 199 Possible 408 http://www.pels.ca.gov/applicants/oct09stats.shtml October 2009 PE and LS Examination Statistics National Structural Tested 218 Passed 107 Pass % 49.08% Failed 111 Fail % 50.92% State-Specific Structural Tested 351 Passed 177 Pass % 50.43% Failed 174 Fail % 49.57% Cutscore 195 Possible 400 http://www.pels.ca.gov/applicants/oct08stats.shtml October 2008 PE and LS Examination Statistics National Structural Tested 217 Pass 111 Pass % 51.15% Fail 106 Fail % 48.85% State-Specific SE Tested 311 Pass 111 Pass % 35.69% Fail 200 Fail % 64.31% Cutscore 170 Possible 400 http://www.pels.ca.gov/applicants/oct07stats.shtml October 2007 PE and LS Examination Statistics National Structural Tested 176 Pass 67 Pass % 38.07% Fail 109 Fail % 61.93% State-Specific SE Tested 279 Pass 83 Pass % 29.75% Fail 196 Fail % 70.25% Cutscore 184 Possible 400 http://www.pels.ca.gov/applicants/oct06stats.shtml October 2006 PE and LS Examination Statistics National Structural Tested 270 Pass 89 Pass % 32.96% Fail 181 Fail % 67.04% State-Specific SE Tested 310 Pass 107 Pass % 34.52% Fail 203 Fail % 65.48% Cutscore 171 Possible 400
http://www.pels.ca.gov/applicants/oct11stats.shtml October 2011 PE and LS Examination Statistics National Structural Tested 197 Passed 58 Pass % 29% Failed 139 Fail % 71% http://www.pels.ca.gov/applicants/ap11stats.shtml April 2011 PE and LS Examination Statistics National Structural Tested 91 Passed 22 Pass % 24.18% Failed 69 Fail % 75.82% http://www.ncees.org/Exams/SE_exam.php October SE pass rates by component Exam First-time takers Repeat takers SE Vertical Component 47% 30% SE Lateral Component 35% 25% April 2011 SE pass rate Exam First-time takers Repeat takers SE 27% n/a
【在 t******o 的大作中提到】 : 我是2009年4月份同时考过的Structural I and II。那时的考试可能和现在不太一样。 : Structural II是8小时,总共4道题。复习的时候主要用了以下资料,希望对你有帮助: : 1- Seismic and Wind Forces by Alan Williams : 2- SERM by PPI : 3- Building code book: IBC2006,ASCE7-05, AISC360, AISC341, ACI318, ACI530 : and NDS2005. : 规范一定要熟悉,尤其是IBC和ASCE7-05,你必须很熟悉才行。
t*o
53 楼
如果你现在对规范还不够熟悉的话,应该先熟读规范ASCE7-05 chapter1-4, 6-7, 11- 13, and 15. 还有IBC规范chapter 16-23. 对于难点,我的理解是,你必须熟悉 concrete, steel, masonry and wood. 很多工程师只熟悉某一种或两种。复习时间是 另一个难点。作为考SE的,基本上都是单位的主力工程师,工作繁忙,在单位没时间复 习。家庭方面,都三十多了,家庭和孩子又占去了很多时间,所以复习的时间相当有限 。你必须合理的最大限度的安排好复习时间。没有足够的复习时间,也是SE通过率低的 一个主要原因。