Try this procedure as mentioned.if any mistake in trying the procedure then retry from first step again.so read it carefully and try it. Brother ML-2040 Toner Light Reset When replacing the toner cartridge in the Brother HL-2040 with a new cartridge (compatible or remanufactured) the user may experience a problem with the toner light staying on, even with the new toner installed. The procedure below has worked for many folks, so give it a shot. Open the front cover of the Brother HL-2040 and leave open while completing the following steps: 1.) Turn the printer off. 2.) Hold the button while turning the printer on. All panel lights should be on. 3.) Release the button once all lights are off. 4. )Press the button 2 times. 5.) Pause. 6.) Press the button 5 times. 7.) The toner light should be off. 8.) The paper light should be on. 9.) Close cover. The ready light should be the only light on. Once all steps are successfully completed your â
f*s
3 楼
2个包子奉上,谢了。
then 2040 completing
【在 e*****3 的大作中提到】 : Try this procedure as mentioned.if any mistake in trying the procedure then : retry from first step again.so read it carefully and try it. Brother ML-2040 : Toner Light Reset : When replacing the toner cartridge in the Brother HL-2040 with a new : cartridge (compatible or remanufactured) the user may experience a problem : with the toner light staying on, even with the new toner installed. The : procedure below has worked for many folks, so give it a shot. : Open the front cover of the Brother HL-2040 and leave open while completing : the following steps: : 1.) Turn the printer off.