T*9
2 楼
希望有点意义,呵呵。
一半是 for repeated cutting use festool track saw
另一半是 a clamped table for using Kreg Jig.
All eges are 2" overhang for clamping conveinence. A center slot is also for
the clamping purpose.
一半是 for repeated cutting use festool track saw
另一半是 a clamped table for using Kreg Jig.
All eges are 2" overhang for clamping conveinence. A center slot is also for
the clamping purpose.
a*e
3 楼
【 以下文字转载自 Travel 讨论区 】
发信人: cassano (糊涂娃), 信区: Travel
标 题: 有偿征导游
发信站: BBS 未名空间站 (Wed Nov 5 09:29:57 2014, 美东)
表姐来美国旅游,会在洛杉矶完两三天和拉斯维加斯玩两天 (20号到25号)。因为不
会英语,需要有车和全程陪同。有意向的朋友可以站内联系。谢谢!
发信人: cassano (糊涂娃), 信区: Travel
标 题: 有偿征导游
发信站: BBS 未名空间站 (Wed Nov 5 09:29:57 2014, 美东)
表姐来美国旅游,会在洛杉矶完两三天和拉斯维加斯玩两天 (20号到25号)。因为不
会英语,需要有车和全程陪同。有意向的朋友可以站内联系。谢谢!
c*m
4 楼
sell 5 call.
E*A
5 楼
不明觉厉真是个多功能的好词
L*n
7 楼
this is the real direction of the market i'm afraid.
L*P
8 楼
Vely vely good
Any detailed plans to share? End result is not enough. Process is more
important.
for
【在 T**9 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 希望有点意义,呵呵。
: 一半是 for repeated cutting use festool track saw
: 另一半是 a clamped table for using Kreg Jig.
: All eges are 2" overhang for clamping conveinence. A center slot is also for
: the clamping purpose.
Any detailed plans to share? End result is not enough. Process is more
important.
for
【在 T**9 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 希望有点意义,呵呵。
: 一半是 for repeated cutting use festool track saw
: 另一半是 a clamped table for using Kreg Jig.
: All eges are 2" overhang for clamping conveinence. A center slot is also for
: the clamping purpose.
u*q
14 楼
惊见Festool。羡慕嫉妒。
L*n
16 楼
last time i call to buy C it was at 2.99 last summer. I said that was the
last day you'll see C at 2.XX. after more than 1 yr. it still holds true:-)
last day you'll see C at 2.XX. after more than 1 yr. it still holds true:-)
T*9
20 楼
没有plan,自己乱搞的,呵呵. size 72"x32", 根据以前剩的plywood 来决定的。这个
size放整块4'x8'也可以.
桌子很简单的,桌面是3/4 MDF screwed to 3/4 Plywood,这个可以经常换;and
plywood screwed to a box frame with 2x6 for perimeter member and 2x4 for
cross member; 2x4 legs are bolted to 2x6 using 3/8" bolts with washers. One
cross member at the bottom
那些tracks 是后装的。 留的overhang 正好装Kreg clamp tracks, Festool side
tracks.
【在 L**P 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: Vely vely good
: Any detailed plans to share? End result is not enough. Process is more
: important.
:
: for
size放整块4'x8'也可以.
桌子很简单的,桌面是3/4 MDF screwed to 3/4 Plywood,这个可以经常换;and
plywood screwed to a box frame with 2x6 for perimeter member and 2x4 for
cross member; 2x4 legs are bolted to 2x6 using 3/8" bolts with washers. One
cross member at the bottom
那些tracks 是后装的。 留的overhang 正好装Kreg clamp tracks, Festool side
tracks.
【在 L**P 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: Vely vely good
: Any detailed plans to share? End result is not enough. Process is more
: important.
:
: for
u*d
25 楼
walstudio说过,牛市始于C, 也结束于C; 或者是金融;反正差不多。
C*e
26 楼
嘻嘻,等着看版上刮起一阵新的烧包风。。。。提前提醒某人慎重。。。。
y*j
29 楼
恭喜楼主,有成为新tool霸的潜能,根平老师比起来,种类略显单一
f*0
31 楼
这次好像是真的,C从来没有这么涨过,等到了4.5 估计没人敢上了,那个时候,它就一直
上涨,大家就只能眼睁睁的看着它飞了.
上涨,大家就只能眼睁睁的看着它飞了.
s*a
32 楼
人家明显是来炫幸福炫老公的。。。楼上的做不出没关系。。我们可以买
T*9
53 楼
我的最穷festool setup
Track saw $500多+ one more 55" track $108+ 2 quick clamps $80,
two MFT short side tracks+ track holders ~$200
怎么可能买得起其他的festool.
本来要买他们 Multi functional table的,要$600多,太贵了,也短了些对我来说。
就买了他们的配件DIY 了,
吸尘器也超贵。我就用了 已经有的shop vac + bosch $25 的管子+craftman power
tool trigger switch,perfect.
【在 p**********g 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: dewalt实惠些................
Track saw $500多+ one more 55" track $108+ 2 quick clamps $80,
two MFT short side tracks+ track holders ~$200
怎么可能买得起其他的festool.
本来要买他们 Multi functional table的,要$600多,太贵了,也短了些对我来说。
就买了他们的配件DIY 了,
吸尘器也超贵。我就用了 已经有的shop vac + bosch $25 的管子+craftman power
tool trigger switch,perfect.
【在 p**********g 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: dewalt实惠些................
o*3
55 楼
shit.
I did not pay attention to the market this afternoon. My C was sold at 4.05.
Damn my indian boss.
I did not pay attention to the market this afternoon. My C was sold at 4.05.
Damn my indian boss.
y*y
58 楼
虽然我没有C,还是进来景仰一下,大夫你很牛啊!
c*e
61 楼
谁知道政府还有几个 billion shares 没卖完?4个bln?5个?计划是年底前卖完,大
家觉得怎么样?
家觉得怎么样?
L*P
62 楼
你没有table saw么?
看你的工具非常精简,做的东西也是我喜欢的简单ikea风格,如果一个track saw也能
做你做的所有东西,我考虑是不是把心爱的table saw大deal变卖了,然后再贴点血本
进track saw算了
table saw我总觉得危险,而且挺占地方啊
【在 T**9 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 我的最穷festool setup
: Track saw $500多+ one more 55" track $108+ 2 quick clamps $80,
: two MFT short side tracks+ track holders ~$200
: 怎么可能买得起其他的festool.
: 本来要买他们 Multi functional table的,要$600多,太贵了,也短了些对我来说。
: 就买了他们的配件DIY 了,
: 吸尘器也超贵。我就用了 已经有的shop vac + bosch $25 的管子+craftman power
: tool trigger switch,perfect.
看你的工具非常精简,做的东西也是我喜欢的简单ikea风格,如果一个track saw也能
做你做的所有东西,我考虑是不是把心爱的table saw大deal变卖了,然后再贴点血本
进track saw算了
table saw我总觉得危险,而且挺占地方啊
【在 T**9 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 我的最穷festool setup
: Track saw $500多+ one more 55" track $108+ 2 quick clamps $80,
: two MFT short side tracks+ track holders ~$200
: 怎么可能买得起其他的festool.
: 本来要买他们 Multi functional table的,要$600多,太贵了,也短了些对我来说。
: 就买了他们的配件DIY 了,
: 吸尘器也超贵。我就用了 已经有的shop vac + bosch $25 的管子+craftman power
: tool trigger switch,perfect.
L*n
67 楼
盘后4.12
T*9
68 楼
Yeah, I only have a track saw.
担心我把手指给cut 了,LD 没同意买table saw.其实也没那么危险,现代的table saw
保护装置挺全的。 不过track saw 也差不多够用了,也许慢点,但DIY 时间无所谓了
。留钱买以后买 router bits.
If you are mainly working on plywood, a track saw is a good option. The cut
quality is really good.
【在 L**P 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 你没有table saw么?
: 看你的工具非常精简,做的东西也是我喜欢的简单ikea风格,如果一个track saw也能
: 做你做的所有东西,我考虑是不是把心爱的table saw大deal变卖了,然后再贴点血本
: 进track saw算了
: table saw我总觉得危险,而且挺占地方啊
担心我把手指给cut 了,LD 没同意买table saw.其实也没那么危险,现代的table saw
保护装置挺全的。 不过track saw 也差不多够用了,也许慢点,但DIY 时间无所谓了
。留钱买以后买 router bits.
If you are mainly working on plywood, a track saw is a good option. The cut
quality is really good.
【在 L**P 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 你没有table saw么?
: 看你的工具非常精简,做的东西也是我喜欢的简单ikea风格,如果一个track saw也能
: 做你做的所有东西,我考虑是不是把心爱的table saw大deal变卖了,然后再贴点血本
: 进track saw算了
: table saw我总觉得危险,而且挺占地方啊
L*n
69 楼
there was one idiot on the board who like to trade C. when "it" comes out
to scream 全仓C ! that's the time to sell. haha.
to scream 全仓C ! that's the time to sell. haha.
r*s
70 楼
bench 很好看阿, 看来个人都有个人得喜好。
找个bench我没办法用, 因为我用得最多得是 hand plane, 手动刨啊刨,需要bench
更矮, 能固定木头
找个bench我没办法用, 因为我用得最多得是 hand plane, 手动刨啊刨,需要bench
更矮, 能固定木头
m*8
71 楼
c涨的话,可以带动BAC,JPM,WFC吗?
d*0
72 楼
忽然想起来, 你这个东西, 下面装个router base, 不就是一个 router table 了?
T*9
76 楼
挖个孔倒不难,不过台面可能不够滑。还要加 fence,处理吸尘, 可能不如买的话算.
我看上benchdog 的这个 benchtop, 贵点,等deal
http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
【在 d**********0 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 忽然想起来, 你这个东西, 下面装个router base, 不就是一个 router table 了?
我看上benchdog 的这个 benchtop, 贵点,等deal
http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
【在 d**********0 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 忽然想起来, 你这个东西, 下面装个router base, 不就是一个 router table 了?
y*j
78 楼
是,我做了个占地上的。光各种track,insert,开关啥的就上百了。整体设计跟这个
思路差不多就是稍微大点儿。
【在 T**9 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 挖个孔倒不难,不过台面可能不够滑。还要加 fence,处理吸尘, 可能不如买的话算.
: 我看上benchdog 的这个 benchtop, 贵点,等deal
: http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
思路差不多就是稍微大点儿。
【在 T**9 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 挖个孔倒不难,不过台面可能不够滑。还要加 fence,处理吸尘, 可能不如买的话算.
: 我看上benchdog 的这个 benchtop, 贵点,等deal
: http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
p*g
80 楼
我用的就是这个
不过自带的那个insert是mdf,相对而言震动的厉害
我后来买了个金属的insert,明显好了很多
【在 T**9 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 挖个孔倒不难,不过台面可能不够滑。还要加 fence,处理吸尘, 可能不如买的话算.
: 我看上benchdog 的这个 benchtop, 贵点,等deal
: http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
不过自带的那个insert是mdf,相对而言震动的厉害
我后来买了个金属的insert,明显好了很多
【在 T**9 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 挖个孔倒不难,不过台面可能不够滑。还要加 fence,处理吸尘, 可能不如买的话算.
: 我看上benchdog 的这个 benchtop, 贵点,等deal
: http://www.amazon.com/Bench-Dog-40-001-Contractor-Benchtop/dp/B
L*n
81 楼
C家 MM starts showing muscles, this gonna be a C cup.
c*r
82 楼
niiu
L*n
85 楼
c means quit curvy. i only do long.
b*c
86 楼
最近版上是木匠们的天下了
z*p
87 楼
没事瞎喊什么! 让咱应声落水.
相关阅读
认识一个倒插门的哥们 (转载)Re: 习主席又引经据典了 (转载)从厦门到呆湾建一条海底隧道, 如何? (转载)大三一男生在食堂A窗口大声对里面的打饭师傅说 zz高科技 泼出去的水全都收回来!只要咬不断普通人去军版发言的结果烫烫习主席又喝茶了 (转载)笑话十则:媳妇说了,昨晚在闺蜜家! zzRe: 要是trump给全美公民免费photo id,主党咋办? (转载)Naughty StringRe: 部分无良顾客的过分还价行为损害普通消费者利益 (转载)奔驰车主变道遭大众车主暴打:为啥你没有素质十条笑话:领导就是领导,年会已过去好几天了都没来上班 zz绝对不能错过的超级幽默笑话 (转载)人呢?十条笑话:小侄子才六岁,喜欢叫我小姨 zz蒙古族就是个杂种民族,至今没搞清楚他爹是谁 (转载)小孩子们的绝妙回答;扶好下巴哦!! (转载)川蒲米花糖