Redian新闻
>
Re: 关于drywall:-)Re: 在美国这种石膏墙上拧螺钉总是不结实怎么办?
avatar
Re: 关于drywall:-)Re: 在美国这种石膏墙上拧螺钉总是不结实怎么办?# Living
b*e
1
nono,柱子是柱子,当然你也可以往柱子上钉东西
stud 一般2“x4" or 2" x6",full height,你钉的那个面是2“,讲究的做法是做一圈挂
镜线,画就从那儿挂下来...
此外,墙上有洞的地方盖的时候都会加stud,也许你会用的上
hollow metal stud是很薄的铁皮(铝?)握的,钉子没问题,实际上,drywall就是这么钉
在stud上的




finder
avatar
b*e
2
http://beehome.info/sendword.php?dw_screw_1
hope this will help: drywall screw is used to fastern drywall board to the
stud which structurally support it...

末做
确的
finder找
stud就只好用手敲了--有stud的地方声音不会发空.万幸stud一
avatar
b*e
3
? you mean "plaster"?
有人也管drywall board叫plaster board,but传统的做法是3 coats plaster on
lathing代替drywall board,那种是湿着糊上去的,干了以后像水泥一样结实,你钉钉子
吃的住劲,drywall board把外面的纸斯开里面都是粉,所以挂重的东东不成...
screw因为上面有罗纹,磨擦力比光的nail更强,但drywall本身吃不住劲,所以
你要透过drywall钉到有stud的地方,I think either screw & large nail works on
drywall(remember drywall is 5/8" or 1/2" thick, so small nail can't get
through...)
相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。