j*I
2 楼
就是象tint的那种。旧了，褪色了，揭的时候发现非常粘。有没有什么药水，可以干这
个的？ 汽油味道实在是太大了。
xiexie
个的？ 汽油味道实在是太大了。
xiexie
g*n
3 楼
喝奶好，能长高个子。
e*t
4 楼
http://www.gilafilms.com/en/Film-FAQ.aspx
If the Removal solution is not available in your area, the steps below
outline an alternate method of removing any brand of window film:
GATHER TOOLS
Single-edge razor blades in a holder/scraper
Spray bottle filled with 8oz water, 4 oz ammonia, 1 tsp dishwasher liquid
soap
Disposable toweling to clean the razor blade edge
Old towel to protect window sill from loose adhesive
Drop cloth to protect floor
REMOVE THE TOP FILM LAYER
Use the razor blade to loosen the top 1/2 - 3/4 inches along the top edge of
the film. Spray the ammonia-water solution (aka "the solution") behind the
lifted film and allow to soak for a minute. As you pry the film loose,
continue to spray behind the loosened film. Continue this process until you
have peeled 3-4 inches free from the glass. Using both hands, grasp this
loosened film and pull the film downward. You may find it easier to peel
diagonally from one corner to the center, then the other corner toward the
center, then bunch the film up in your hands and pull the remainder down
toward the bottom of the window. If the film sticks, spray the solution
behind it to loosen the grip of the adhesive. As you rip the film from the
window, the tearing sound you hear is the shredding of the old adhesive as
part of it comes away with the film and part of it remains on the glass.
If you have the time and the film has been in place more than five years, do
the job overnight while you sleep. Spray the solution onto the top of the
film, then cover the entire glass area with a precut plastic sheet (i.e. 30-
60 gal trash bag cut to size). Apply the plastic sheet on top of the wet
film, then use masking tape strips to secure the bag around the inside of
the window frame. Allow it to sit for 2-4 hours, then peel back the top edge
, spray 10-20 "squirts" of the solution behind the plastic sheet, then
reseal the top and allow to sit for 2-4 more hours (or overnight). During
this time, the solution will soften the adhesive so you can more easily peel
the old film from the window.
CAUTION: Do not leave a black or dark plastic bag suspended over the window,
especially if you have dual-pane windows. Leaving the bag in place on a
warm/hot day can cause a significant heat stress to your windows, which
could contribute to a window crack.
REMOVE THE ADHESIVE
After removing the film, a translucent or clear layer of adhesive may remain
on the glass. To remove, generously spray the entire surface with the
solution. Rub the solution into the "dry" adhesive until it becomes milky
white. This color is a sign that the adhesive has broken its bond to the
glass and has become pliable enough to shave off. Re-spray the area you plan
to shave and use a new razor blade. Shave upward in quick movements. As the
adhesive collects on the blade, wipe it clean with an old towel. (Note:
When you are finished with the job, throw towel away).Do not let the
adhesive fall onto carpet or fabrics. Change blades as frequently as needed
to keep a sharp edge and avoid scratching the glass.
【在 j*****I 的大作中提到】
: 就是象tint的那种。旧了，褪色了，揭的时候发现非常粘。有没有什么药水，可以干这
: 个的？ 汽油味道实在是太大了。
: xiexie
If the Removal solution is not available in your area, the steps below
outline an alternate method of removing any brand of window film:
GATHER TOOLS
Single-edge razor blades in a holder/scraper
Spray bottle filled with 8oz water, 4 oz ammonia, 1 tsp dishwasher liquid
soap
Disposable toweling to clean the razor blade edge
Old towel to protect window sill from loose adhesive
Drop cloth to protect floor
REMOVE THE TOP FILM LAYER
Use the razor blade to loosen the top 1/2 - 3/4 inches along the top edge of
the film. Spray the ammonia-water solution (aka "the solution") behind the
lifted film and allow to soak for a minute. As you pry the film loose,
continue to spray behind the loosened film. Continue this process until you
have peeled 3-4 inches free from the glass. Using both hands, grasp this
loosened film and pull the film downward. You may find it easier to peel
diagonally from one corner to the center, then the other corner toward the
center, then bunch the film up in your hands and pull the remainder down
toward the bottom of the window. If the film sticks, spray the solution
behind it to loosen the grip of the adhesive. As you rip the film from the
window, the tearing sound you hear is the shredding of the old adhesive as
part of it comes away with the film and part of it remains on the glass.
If you have the time and the film has been in place more than five years, do
the job overnight while you sleep. Spray the solution onto the top of the
film, then cover the entire glass area with a precut plastic sheet (i.e. 30-
60 gal trash bag cut to size). Apply the plastic sheet on top of the wet
film, then use masking tape strips to secure the bag around the inside of
the window frame. Allow it to sit for 2-4 hours, then peel back the top edge
, spray 10-20 "squirts" of the solution behind the plastic sheet, then
reseal the top and allow to sit for 2-4 more hours (or overnight). During
this time, the solution will soften the adhesive so you can more easily peel
the old film from the window.
CAUTION: Do not leave a black or dark plastic bag suspended over the window,
especially if you have dual-pane windows. Leaving the bag in place on a
warm/hot day can cause a significant heat stress to your windows, which
could contribute to a window crack.
REMOVE THE ADHESIVE
After removing the film, a translucent or clear layer of adhesive may remain
on the glass. To remove, generously spray the entire surface with the
solution. Rub the solution into the "dry" adhesive until it becomes milky
white. This color is a sign that the adhesive has broken its bond to the
glass and has become pliable enough to shave off. Re-spray the area you plan
to shave and use a new razor blade. Shave upward in quick movements. As the
adhesive collects on the blade, wipe it clean with an old towel. (Note:
When you are finished with the job, throw towel away).Do not let the
adhesive fall onto carpet or fabrics. Change blades as frequently as needed
to keep a sharp edge and avoid scratching the glass.
【在 j*****I 的大作中提到】
: 就是象tint的那种。旧了，褪色了，揭的时候发现非常粘。有没有什么药水，可以干这
: 个的？ 汽油味道实在是太大了。
: xiexie
s*y
5 楼
注意刷牙。
【在 r***c 的大作中提到】
: 即使不饿，有时她自己都说，我怎么喝那么多奶。怎么断奶
【在 r***c 的大作中提到】
: 即使不饿，有时她自己都说，我怎么喝那么多奶。怎么断奶
相关阅读
Screen Porch包一下需要Permit吗？请教：关于Homeowners Insurance的问题车库门关不上的问题人在美国,但是工资国内发的那种,买车买房会被批准loan啊请问：纽约地税有没办法付一年的？lowes的窗帘跟bed bath and beyond比如何？谁能说一说，莲花（Lotus）通畅型卫生座，真能化解便秘吗?电动车库门也要经常润滑home warranty 请教问一下关于浴室/厕所的油漆 防水 问题不知道要不要签agent争取拿到第一手信息有人换(刷)过柜门吗？大家把NVR藏哪儿？home depot 10off100+coupon 义卖tire inflator请教大家：砖墙和保暖层之间的防水防潮板怎么处理？请问哪种竹笋能吃啊目前，从中国转美元来美国的最佳方法是什么呀？家里热水器有时候咕噜咕的响是怎么回事？天冷了，外面的龙头是不是要套个faucet cover