z*9
2 楼
who told you '接缝会漏水?'
never heard of that.
never heard of that.
B*4
4 楼
真木头的siding最难维护老要刷漆。砖石的不用维护,但10-20年就要换,因为抹缝的
灰浆到时间就酥脆了,漏水。塑料或者金属siding不用维护,而且50年一换。
灰浆到时间就酥脆了,漏水。塑料或者金属siding不用维护,而且50年一换。
B*4
8 楼
不是你想象的那么难:
Repointing process
Sound mortar normally does not need to be removed from a building during the
repointing process, although such a practice is common. New mortar can be
designed to match the color and texture of existing mortar to avoid visual
aberrations. The repointing process begins by removing damaged pointing to a
depth equal to or slightly more than the width of the joint, or to the
point where sound mortar is reached. Depths greater than 2-1/2" or 4 cm
would be filled in several passes, allowing the mortar to cure for at least
24 hours. The joint profile would be as rectangular as possible as the new
pointing mortar should be allowed ample opportunity to bond with the masonry
unit.
Removal of old mortar between joints is done carefully to avoid damage to
masonry units. On very old buildings with soft materials, such as under-
fired brick, removal by hand is often the most effective to avoid damage.
Hard Portland cement mortar is usually removed with a grinder or power
circular masonry blade, taking care not to damage the masonry units.
Vertical joints in most cases are always done by hand or with small power
chisels.
Poor repointing work often raises the level of the mortar joint above the
face of the masonry unit, which causes the mortar edge to feather. Such a
process is aesthetically undesirable and can cause performance problems as a
thin layer of mortar will quickly erode. In addition, depending on the
nature of the mortar, mortar that rises above the level of the face of the
masonry unit can participate in damaging the arris or corner of the masonry
unit. In these cases, deteriorated mortar is often not removed to a
sufficient depth.
【在 z***9 的大作中提到】
: ok, I will ask someone to confirm that. I never heard of that. this
: maintenance seems to be too huge to be true.
Repointing process
Sound mortar normally does not need to be removed from a building during the
repointing process, although such a practice is common. New mortar can be
designed to match the color and texture of existing mortar to avoid visual
aberrations. The repointing process begins by removing damaged pointing to a
depth equal to or slightly more than the width of the joint, or to the
point where sound mortar is reached. Depths greater than 2-1/2" or 4 cm
would be filled in several passes, allowing the mortar to cure for at least
24 hours. The joint profile would be as rectangular as possible as the new
pointing mortar should be allowed ample opportunity to bond with the masonry
unit.
Removal of old mortar between joints is done carefully to avoid damage to
masonry units. On very old buildings with soft materials, such as under-
fired brick, removal by hand is often the most effective to avoid damage.
Hard Portland cement mortar is usually removed with a grinder or power
circular masonry blade, taking care not to damage the masonry units.
Vertical joints in most cases are always done by hand or with small power
chisels.
Poor repointing work often raises the level of the mortar joint above the
face of the masonry unit, which causes the mortar edge to feather. Such a
process is aesthetically undesirable and can cause performance problems as a
thin layer of mortar will quickly erode. In addition, depending on the
nature of the mortar, mortar that rises above the level of the face of the
masonry unit can participate in damaging the arris or corner of the masonry
unit. In these cases, deteriorated mortar is often not removed to a
sufficient depth.
【在 z***9 的大作中提到】
: ok, I will ask someone to confirm that. I never heard of that. this
: maintenance seems to be too huge to be true.
z*9
9 楼
good to know. thanks for the info.
the
a
least
【在 B********4 的大作中提到】
: 不是你想象的那么难:
: Repointing process
: Sound mortar normally does not need to be removed from a building during the
: repointing process, although such a practice is common. New mortar can be
: designed to match the color and texture of existing mortar to avoid visual
: aberrations. The repointing process begins by removing damaged pointing to a
: depth equal to or slightly more than the width of the joint, or to the
: point where sound mortar is reached. Depths greater than 2-1/2" or 4 cm
: would be filled in several passes, allowing the mortar to cure for at least
: 24 hours. The joint profile would be as rectangular as possible as the new
the
a
least
【在 B********4 的大作中提到】
: 不是你想象的那么难:
: Repointing process
: Sound mortar normally does not need to be removed from a building during the
: repointing process, although such a practice is common. New mortar can be
: designed to match the color and texture of existing mortar to avoid visual
: aberrations. The repointing process begins by removing damaged pointing to a
: depth equal to or slightly more than the width of the joint, or to the
: point where sound mortar is reached. Depths greater than 2-1/2" or 4 cm
: would be filled in several passes, allowing the mortar to cure for at least
: 24 hours. The joint profile would be as rectangular as possible as the new
相关阅读
请推荐一款微波炉吧通往YARD的大门锁忽然转不动了,打开以后就再也关不上,是不是冻坏了,找什么地方修呢?买房怎么砍价?感觉很无力啊郁闷,一个银行的房子今天利率好像在跌。想lock的同学密切关注一下我来请教个抽油烟机的问题w2收到了吗?New SF house with a drainfield septic system欢迎参加元月30日《湾区地产》俱乐部新年房地产讲座 (转载)今天下午看了个foreclosure的房子帮忙看看风水,这个算路冲吗?现在银行不能给出具体的closing cost了吗?去年10月从F1转成H1,第一次买房能拿到8000元tax credit吗?一定不能找Northwest window and door company买窗户呀有人自己装过whole house humidifier吗?换百叶窗怎么折腾?我的除虫心得包子贴:怎样才能拿到"最"低利率?Ductless Air Conditionersfurnace maintanance & air duct cleaning