d*0
2 楼
Ikea 卖的家具, 大多是烂的plywood, 甚至是 compressed wood做的, 上面贴一层
硬膜。
想自己去 homedepot 买好的 cabinet plywood, $30一张。 自己上油漆。
这种plywood 是 oak 的, 表面已经打磨比较光滑了。 问题是怎么油漆? 俺没有搞
过。 能弄成那些Ikea 家具的效果么?
或者, 直接贴膜? 这些膜是那里卖的? 怎么贴?
硬膜。
想自己去 homedepot 买好的 cabinet plywood, $30一张。 自己上油漆。
这种plywood 是 oak 的, 表面已经打磨比较光滑了。 问题是怎么油漆? 俺没有搞
过。 能弄成那些Ikea 家具的效果么?
或者, 直接贴膜? 这些膜是那里卖的? 怎么贴?
P*l
3 楼
re
p*g
4 楼
和木头没有区别吧,我都上过(STAIN OR LATEX)帮顶一下
p*g
7 楼
建议你去ana-white.com
网站是一个女的见的,可以人家是做家具的牛人啊
网站是一个女的见的,可以人家是做家具的牛人啊
f*i
10 楼
oak才30刀?薄的?
prime了paint就好。但是刷不容易刷的没有brush mark,滚筒的话表面不光滑而且有的
有点点类的texture也不好看。不知道喷是不是好点。还没试过
晚了后,在clear coat一下,就很光滑了
【在 d**********0 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: Ikea 卖的家具, 大多是烂的plywood, 甚至是 compressed wood做的, 上面贴一层
: 硬膜。
: 想自己去 homedepot 买好的 cabinet plywood, $30一张。 自己上油漆。
: 这种plywood 是 oak 的, 表面已经打磨比较光滑了。 问题是怎么油漆? 俺没有搞
: 过。 能弄成那些Ikea 家具的效果么?
: 或者, 直接贴膜? 这些膜是那里卖的? 怎么贴?
prime了paint就好。但是刷不容易刷的没有brush mark,滚筒的话表面不光滑而且有的
有点点类的texture也不好看。不知道喷是不是好点。还没试过
晚了后,在clear coat一下,就很光滑了
【在 d**********0 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: Ikea 卖的家具, 大多是烂的plywood, 甚至是 compressed wood做的, 上面贴一层
: 硬膜。
: 想自己去 homedepot 买好的 cabinet plywood, $30一张。 自己上油漆。
: 这种plywood 是 oak 的, 表面已经打磨比较光滑了。 问题是怎么油漆? 俺没有搞
: 过。 能弄成那些Ikea 家具的效果么?
: 或者, 直接贴膜? 这些膜是那里卖的? 怎么贴?
p*p
13 楼
the most expensive plywood in HD is $45/piece. I bought a couple of it
before. It is very good plywood. But the surface is still not smooth enough.
I sanded it before painting it. You can feel the difference before and
after sanding.
I didn't pay attention to the original material before. Maybe it is OAK?
【在 d**********0 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: 是。 我看标签上这么写, $45 一张。 $30 的大概是 pine. 我记错了。
: 但两者都是 cabinet grade plywood. 很厚很光滑的那种。
before. It is very good plywood. But the surface is still not smooth enough.
I sanded it before painting it. You can feel the difference before and
after sanding.
I didn't pay attention to the original material before. Maybe it is OAK?
【在 d**********0 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: 是。 我看标签上这么写, $45 一张。 $30 的大概是 pine. 我记错了。
: 但两者都是 cabinet grade plywood. 很厚很光滑的那种。
d*0
14 楼
是怎么打磨的? 用多细的砂纸?
是不是这么的步骤:
1。 打磨
2。 primer
3。 paint, , 两遍, 之间打磨。
4。 coat..
???
enough.
【在 p*****p 的大作中提到】![](/moin_static193/solenoid/img/up.png)
: the most expensive plywood in HD is $45/piece. I bought a couple of it
: before. It is very good plywood. But the surface is still not smooth enough.
: I sanded it before painting it. You can feel the difference before and
: after sanding.
: I didn't pay attention to the original material before. Maybe it is OAK?
是不是这么的步骤:
1。 打磨
2。 primer
3。 paint, , 两遍, 之间打磨。
4。 coat..
???
enough.
【在 p*****p 的大作中提到】
![](/moin_static193/solenoid/img/up.png)
: the most expensive plywood in HD is $45/piece. I bought a couple of it
: before. It is very good plywood. But the surface is still not smooth enough.
: I sanded it before painting it. You can feel the difference before and
: after sanding.
: I didn't pay attention to the original material before. Maybe it is OAK?
相关阅读
大家都用哪家快运寄奶粉到国内?湾区求推荐车险 房屋保险湾区住三年的话 是不是应该买房?投资房出租.请推荐给小朋友房间用的最好的Non-VOC paint收房时 巧妙识别“常见病[转]哪有便宜的mulch?哪种老鼠药最毒?看房子一定同时只能有一个agent吗?问一下agent review的网站哪里靠谱一些Mulch下面的soaker hose怎么埋? (转载)请问大家Remodel厨房应该如何找人分别作关于 loan的几个问题:Good faith money 一般给多少?哪个lot风水好?马油来到了国内用途多二楼的木地板怎么装?请教两个新房选哪个好?请教imore及各位大侠,如何修我的暖气?你心目中理想的10岁小孩的房间是什么样的?最好付家具品牌。 (转载)