Redian新闻
>
求助!车库门控制好像坏掉了,有人修过么?
avatar
求助!车库门控制好像坏掉了,有人修过么?# Living
V*e
1
rt
avatar
o*e
3
试图开门或者关门,opener还是有持续的声音发出,如果不再按一下控制器,会一直响
下去。但门却不动。也就是那个链条根本没在动。
可以排除不是sensor的问题(确定没东西在sensor之间,亮灯也正常),也不是扭力的
问题(已经试过调到最大了)
有人知道该怎么办么?谢谢!
avatar
b*a
4
99% alcohol, 镜头纸
avatar
j*o
5
Just a little left , what a pity thing.
avatar
p*p
6
齿轮滑丝了,换齿轮,看youtube
或者,整个机器换掉,如果机器很老的话
avatar
w*a
7
镜头纸呀

【在 V**e 的大作中提到】
: rt
avatar
w*g
9
replace the whole thing
cheap
one day job diy

【在 o*e 的大作中提到】
: 试图开门或者关门,opener还是有持续的声音发出,如果不再按一下控制器,会一直响
: 下去。但门却不动。也就是那个链条根本没在动。
: 可以排除不是sensor的问题(确定没东西在sensor之间,亮灯也正常),也不是扭力的
: 问题(已经试过调到最大了)
: 有人知道该怎么办么?谢谢!

avatar
Y*i
10
擦之前最好用洗耳球吹吹

【在 V**e 的大作中提到】
: rt
avatar
p*j
11
diy的都是牛人
avatar
V*e
12
谢谢上面几位,包子已发
avatar
u*q
13
RE
把chain-driven的换成belt-driven的,超级安静。

【在 w*******g 的大作中提到】
: replace the whole thing
: cheap
: one day job diy

avatar
Y*i
14
谢谢包子
不过个人建议
还是尽量不要擦拭镜头
镜头表面的指印、灰尘、水渍对于成像大多数情况并无太大影响。

【在 V**e 的大作中提到】
: rt
avatar
w*g
15
Belt drive is quiet/expensive but your garage door is another source of
noise. Chain drive can be quiet if you install it correctly.

【在 u****q 的大作中提到】
: RE
: 把chain-driven的换成belt-driven的,超级安静。

avatar
o*e
16
拆开来看了,的确是,准备买个换上试试。谢谢

【在 p*****p 的大作中提到】
: 齿轮滑丝了,换齿轮,看youtube
: 或者,整个机器换掉,如果机器很老的话

avatar
o*e
17
Whole thing 是说把整个opener和链条都换掉?

【在 w*******g 的大作中提到】
: replace the whole thing
: cheap
: one day job diy

avatar
w*g
18
right. Replace everything. Drive, opener, sensor.
I did it for my garage a few months ago and it is not hard but takes time.
The opener is around 200 dollars.
It is a one person job but if your wife can help you, it is a little easier.
I got the same problem as yours and replacing parts cost 40 bucks and I have
to take off the opener as well.
The most time consuming part turns out to be routing the wires for sensor
and opener. I don't have a staple gun and removing old wire takes time as
well since I don't want to pull the whole thing out.

【在 o*e 的大作中提到】
: Whole thing 是说把整个opener和链条都换掉?
avatar
o*e
19
谢谢, 我先试试换gear吧。

easier.
have

【在 w*******g 的大作中提到】
: right. Replace everything. Drive, opener, sensor.
: I did it for my garage a few months ago and it is not hard but takes time.
: The opener is around 200 dollars.
: It is a one person job but if your wife can help you, it is a little easier.
: I got the same problem as yours and replacing parts cost 40 bucks and I have
: to take off the opener as well.
: The most time consuming part turns out to be routing the wires for sensor
: and opener. I don't have a staple gun and removing old wire takes time as
: well since I don't want to pull the whole thing out.

相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。