坚决不种草坪# Living
s*u
1 楼
先废话一下，我刚刚离开求职市场，这是最近一些猎头发给我的职位信息，各位同行如
果有兴趣的，请直接联系相关猎头。个人觉得猎头代交HR Manager似乎能把进第一轮面
试的机会提高那么一点点（在公司里没私人network的时候）
希望大家都求职顺利
=======================
Recruiter: Chris Drake [email protected]/* */ 512 222 7116
Company
www.paratusdiagnostics.com
GENERAL DESCRIPTION
The Optical Engineer is responsible for the applied research and development
of bio-medical systems and sub-systems to be used in the development of the
Paratus foundational point-of-care cartridge technology. The Optical
Engineer is responsible for the design and development of new device optical
architectures as applicable to multiplexed chemiluminescent (and
fluorescent) detection systems. The candidate should be an expert in Zemax,
and have familiarity with CAD and 3D printing in order to facilitate the
rapid development of optical components for proof of principle and prototype
multiplex analyte detection systems. A successful candidate will also have
deep skills in MatLab, C++, and ImageJ. The position also requires an in
depth knowledge of laser diodes and LEDÃ￠??s and optical detection
methods (e.g. photodetectors, CCDÃ￠??s, CMOS sensors, and PMTÃ￠?
?s). This is an entry level position.
REQUIREMENTS
Education:
BS in Optical Engineering, Electrical Engineering, or Physics from a major
University
Skills and Experience Required:
Ã￠?Â￠ Strong analytical and communication skills.
Ã￠?Â￠ Strong proficiency with Zemax required.
Ã￠?Â￠ Experience with small-scale optics (e.g. smartphone
cameras, CCDÃ￠??s, CMOS sensors)
Ã￠?Â￠ Strong background optical system design.
Ã￠?Â￠ Experience with plastics (design, fabrication, 3D
printing, injection molding) highly desired.
Ã￠?Â￠ Experience with spectroscopic techniques is highly
desired.
Essential Duties and Responsibilities
Responsibilities:
Ã￠?Â￠ Design and fabrication of primarily plastic optical
components and devices.
Ã￠?Â￠ Design, analysis and optimization of lensing systems.
Ã￠?Â￠ Design of complex optical systems to include lenses,
coatings, filters, mirrors and opto-mechanical components.
Ã￠?Â￠ Construct the design of complex laboratory experiments.
Ã￠?Â￠ Perform experimental testing, device characterization,
and data analysis.
Ã￠?Â￠ Design of optical systems for miniaturized medical
devices.
Ã￠?Â￠ Testing and validation of aforementioned devices and
components.
Ã￠?Â￠ Design and analysis of spectroscopic methods including
chemiluminescence and fluorescence.
Ã￠?Â￠ Contribute to the creation of innovative solutions.
Ã￠?Â￠ Assist with the maintenance, cleanliness and safety of
the laboratory.
Ã￠?Â￠ Interface and work effectively with multiple
interdisciplinary departments.
=======================
Recruiter
Abdul Qader
Email:[email protected]/* */
Phone: 214-556-5774 X 116
Title : Optical Engineer (Tech Lead Embedded)
Duration: Long-term
Location: Oregon
• Master's degree in Electrical Engineering, Optical Engineering or
Science, Physics, or other related technical areas.
• Experience in the design and test of optical devices
• System experience in developing or using simulation software,
such as Matlab/Simulink, etc.
• Work will involve providing support for modelling and design for
prototyping and manufacturing of lightguides and lenses, use software tools
(LightTools, Zemax etc.) to model system optics characteristics.
• Familiarity with laboratory optical bench optics, electronics,
optoelectronics, and safe use of lasers, able to design and carry out laser-
based optical experiments, Optical microfabrication processes and techniques;
=======================
I am currently seeking an Optics Manager with a background in infrared
optics and opto-mechanical subsystems. Experience with product development,
customer management, and technical support are required. BS degree in a
technical field and managing or engineering experience and five-plus years
of experience required. I am also seeking a Thin Film Engineer with coating
design, process development, and vapor deposition experience. BS degree,
five-plus years of experience and requires IR coating experience. Both
positions are permanent and in southern CA.
Please contact me, and include a resume, if this position is of interest to
you. If not, please pass this along to any colleagues or friends possessing
these skills and looking for a new position. Thank you.
Ryan J. Asher
The Photonics Group
919-572-2292
[email protected]/* */
www.photonicsgrp.com
========================
Kris Stewart
Recruiter - Engineering
Experis
T: 949-862-6157
C: 714-887-7494
Milpitas, California (95035)
Security Clearance None
Education Bachelor's
Description Senior Systems Design Engineer - CCD/CMOS Sensors
Responsibilities
Senior Systems Design Engineer with CCD/CMOS Sensors - This individual will
be responsible for system architecture, modeling, design, integration and
characterization of new semiconductor inspection and metrology systems.
Senior Systems Design Engineer - CCD/CMOS Sensors
These activities will include: System Development Engineer.
Definition and design of imaging systems and sub-systems to meet customer
requirements and business objectives
Modeling from basic principles the performance of such systems, in
particular the interaction of the sensor sub-system with the rest of the
system components
Understanding the performance of existing systems, from signal generation
through signal detection and recognition, and devising, implementing, and
verifying improvements to these systems
Defining error budgets and strategies to enable system calibration,
stability, and matching
Leading technical teams through troubleshooting using data-driven fishbone
techniques
Senior Systems Design Engineer - CCD/CMOS Sensors - Preferred Qualifications
The ideal candidate: Senior Systems Design Engineer - CCD/CMOS Sensors
Is an innovative thinker, with solid background in multiple areas,
preferably optical instrumentation, image sensors, data analysis, and signal
processing
Is able to make whole system connections and see the big picture
Is capable and willing to design, build and use optical lab setups
incorporating high speed electronics
Background in any of the following is a strongly preferred:
CCD & CMOS sensors Image sensor electronics Optical microscopy Detection
system modeling Control systems
Light sources
The candidate should be a self-motivated individual with ability to
multitask.
Strong written and verbal communications skills are also needed for
extensive interactions with members of a multi-disciplinary global team.
Minimum Qualifications - Senior Systems Design Engineer - CCD/CMOS Sensors
Doctorate (Academic) with at least 5 years of experience OR
Master's Level Degree with at least 6 years of experience OR Bachelor's
Level Degree with at least 7 years of experience
===========================================
I'm a recruiter and I have an opening in northern CA for an Optical
Spectrometry Scientist. The position is for a scientist with CARS (
Coherent Anti-Stokes Ramam) spectroscopy experience. Know anyone I could
talk to about this? Would this be something you'd have an interest in
hearing more about?
Thanks.
---------------------------------------------------------
Brian Murray
Senior Technical Recruiter, The Photonics Group
919-572-2292
[email protected]/* */
http://www.linkedin.com/in/brianmurray3opticsrecruiter
===========================================
果有兴趣的，请直接联系相关猎头。个人觉得猎头代交HR Manager似乎能把进第一轮面
试的机会提高那么一点点（在公司里没私人network的时候）
希望大家都求职顺利
=======================
Recruiter: Chris Drake [email protected]/* */ 512 222 7116
Company
www.paratusdiagnostics.com
GENERAL DESCRIPTION
The Optical Engineer is responsible for the applied research and development
of bio-medical systems and sub-systems to be used in the development of the
Paratus foundational point-of-care cartridge technology. The Optical
Engineer is responsible for the design and development of new device optical
architectures as applicable to multiplexed chemiluminescent (and
fluorescent) detection systems. The candidate should be an expert in Zemax,
and have familiarity with CAD and 3D printing in order to facilitate the
rapid development of optical components for proof of principle and prototype
multiplex analyte detection systems. A successful candidate will also have
deep skills in MatLab, C++, and ImageJ. The position also requires an in
depth knowledge of laser diodes and LEDÃ￠??s and optical detection
methods (e.g. photodetectors, CCDÃ￠??s, CMOS sensors, and PMTÃ￠?
?s). This is an entry level position.
REQUIREMENTS
Education:
BS in Optical Engineering, Electrical Engineering, or Physics from a major
University
Skills and Experience Required:
Ã￠?Â￠ Strong analytical and communication skills.
Ã￠?Â￠ Strong proficiency with Zemax required.
Ã￠?Â￠ Experience with small-scale optics (e.g. smartphone
cameras, CCDÃ￠??s, CMOS sensors)
Ã￠?Â￠ Strong background optical system design.
Ã￠?Â￠ Experience with plastics (design, fabrication, 3D
printing, injection molding) highly desired.
Ã￠?Â￠ Experience with spectroscopic techniques is highly
desired.
Essential Duties and Responsibilities
Responsibilities:
Ã￠?Â￠ Design and fabrication of primarily plastic optical
components and devices.
Ã￠?Â￠ Design, analysis and optimization of lensing systems.
Ã￠?Â￠ Design of complex optical systems to include lenses,
coatings, filters, mirrors and opto-mechanical components.
Ã￠?Â￠ Construct the design of complex laboratory experiments.
Ã￠?Â￠ Perform experimental testing, device characterization,
and data analysis.
Ã￠?Â￠ Design of optical systems for miniaturized medical
devices.
Ã￠?Â￠ Testing and validation of aforementioned devices and
components.
Ã￠?Â￠ Design and analysis of spectroscopic methods including
chemiluminescence and fluorescence.
Ã￠?Â￠ Contribute to the creation of innovative solutions.
Ã￠?Â￠ Assist with the maintenance, cleanliness and safety of
the laboratory.
Ã￠?Â￠ Interface and work effectively with multiple
interdisciplinary departments.
=======================
Recruiter
Abdul Qader
Email:[email protected]/* */
Phone: 214-556-5774 X 116
Title : Optical Engineer (Tech Lead Embedded)
Duration: Long-term
Location: Oregon
• Master's degree in Electrical Engineering, Optical Engineering or
Science, Physics, or other related technical areas.
• Experience in the design and test of optical devices
• System experience in developing or using simulation software,
such as Matlab/Simulink, etc.
• Work will involve providing support for modelling and design for
prototyping and manufacturing of lightguides and lenses, use software tools
(LightTools, Zemax etc.) to model system optics characteristics.
• Familiarity with laboratory optical bench optics, electronics,
optoelectronics, and safe use of lasers, able to design and carry out laser-
based optical experiments, Optical microfabrication processes and techniques;
=======================
I am currently seeking an Optics Manager with a background in infrared
optics and opto-mechanical subsystems. Experience with product development,
customer management, and technical support are required. BS degree in a
technical field and managing or engineering experience and five-plus years
of experience required. I am also seeking a Thin Film Engineer with coating
design, process development, and vapor deposition experience. BS degree,
five-plus years of experience and requires IR coating experience. Both
positions are permanent and in southern CA.
Please contact me, and include a resume, if this position is of interest to
you. If not, please pass this along to any colleagues or friends possessing
these skills and looking for a new position. Thank you.
Ryan J. Asher
The Photonics Group
919-572-2292
[email protected]/* */
www.photonicsgrp.com
========================
Kris Stewart
Recruiter - Engineering
Experis
T: 949-862-6157
C: 714-887-7494
Milpitas, California (95035)
Security Clearance None
Education Bachelor's
Description Senior Systems Design Engineer - CCD/CMOS Sensors
Responsibilities
Senior Systems Design Engineer with CCD/CMOS Sensors - This individual will
be responsible for system architecture, modeling, design, integration and
characterization of new semiconductor inspection and metrology systems.
Senior Systems Design Engineer - CCD/CMOS Sensors
These activities will include: System Development Engineer.
Definition and design of imaging systems and sub-systems to meet customer
requirements and business objectives
Modeling from basic principles the performance of such systems, in
particular the interaction of the sensor sub-system with the rest of the
system components
Understanding the performance of existing systems, from signal generation
through signal detection and recognition, and devising, implementing, and
verifying improvements to these systems
Defining error budgets and strategies to enable system calibration,
stability, and matching
Leading technical teams through troubleshooting using data-driven fishbone
techniques
Senior Systems Design Engineer - CCD/CMOS Sensors - Preferred Qualifications
The ideal candidate: Senior Systems Design Engineer - CCD/CMOS Sensors
Is an innovative thinker, with solid background in multiple areas,
preferably optical instrumentation, image sensors, data analysis, and signal
processing
Is able to make whole system connections and see the big picture
Is capable and willing to design, build and use optical lab setups
incorporating high speed electronics
Background in any of the following is a strongly preferred:
CCD & CMOS sensors Image sensor electronics Optical microscopy Detection
system modeling Control systems
Light sources
The candidate should be a self-motivated individual with ability to
multitask.
Strong written and verbal communications skills are also needed for
extensive interactions with members of a multi-disciplinary global team.
Minimum Qualifications - Senior Systems Design Engineer - CCD/CMOS Sensors
Doctorate (Academic) with at least 5 years of experience OR
Master's Level Degree with at least 6 years of experience OR Bachelor's
Level Degree with at least 7 years of experience
===========================================
I'm a recruiter and I have an opening in northern CA for an Optical
Spectrometry Scientist. The position is for a scientist with CARS (
Coherent Anti-Stokes Ramam) spectroscopy experience. Know anyone I could
talk to about this? Would this be something you'd have an interest in
hearing more about?
Thanks.
---------------------------------------------------------
Brian Murray
Senior Technical Recruiter, The Photonics Group
919-572-2292
[email protected]/* */
http://www.linkedin.com/in/brianmurray3opticsrecruiter
===========================================
