m*m
2 楼
08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
成功。
现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
成功。
现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
r*0
3 楼
1 你出生医院开具的出生证明(一个小本子),如果没有,就去医院开一个,然后再去
你出生时登记户口的派出所开具的身份证明(大意写,父母是谁,那年生你) 2 拿这
些材料,还有你户口,身份证 ,照片到公证处去公证。
你出生时登记户口的派出所开具的身份证明(大意写,父母是谁,那年生你) 2 拿这
些材料,还有你户口,身份证 ,照片到公证处去公证。
k*x
4 楼
哪下的?我的是02 tl,要black dvd,一直都找不到可以破解的地图
给个连接吧,谢谢!
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
给个连接吧,谢谢!
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
a*a
6 楼
Is your download legal?
if it is not legal, the dealer is not 黑心. You are.
if it is not legal, the dealer is not 黑心. You are.
l*r
7 楼
good to know, should consider starting this kind of service in my friends'
shop.
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
shop.
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
m*m
10 楼
Here is the link to the discuss forum:
http://www.demonoid.me/files/details/2789697/?
load_bal=007049514374&show_files=&page=6
Also there is a BT link to download the seed. Should be easy to find the
White Disk seed.
Then follow the following instructions:
- Update/install IMGBurn on your computer
- Update/install 7zip on your computer
- Using 7zip, extract large 4.A2 white.rar file
- Using 7zip, extract the first of many zipped files that were created
- Using 7zip, extract the ISO that was created to a new folder on your
desktop area
- Copy over these two files (09Jog2.bin, 09Touch2.bin) found elsewhere
in
this forum (that have DRM stripped out) to the new folder overwriting
what’
s inside.
http://www.sendspace.com/file/mbuqvb (09Touch2.bin)
http://www.sendspace.com/file/xwydjs (09Jog2.bin)
- Open IMGBurn and set the burn option to ISO9660 + UDF format, then set
the
ISO9660 label AND the UDF label to the name of the ISO file which is
B120SA2
- Insert a DVD+R DL (dual layer) blank DVD into your drive
- Drag over all 50 files within the new folder to the burn project
window
- Burn to your bland dual layer DVD at 2.4X
- Verify the burned DVD
- Start your engine.
- Remove the White DVD underneath the driver’s seat
- Insert newly created DVD
- Wait about 3 minutes as the software is downloaded from the DVD.
- That’s it!
Important note:
- Do not use WinRAR to extract the ISO (another commenter discovered a
problem using it after several unsuccessful burns)
- Try to close any programs that are open including any antivirus
programs.
This reduces the chance of the open programs crashing your computer
during
the burn process (you never know)
- Burn at the slowest speed possible and do not have your kids running
around the computer to prevent vibration/shock which will yield a bad
burn.
(I burned in 1x first time and failed. Second time, I burned in 2.4x
succeed
.)
- Buy good quality Verbatim blank dual layer DVDs. I used Verbatim DVD+R
DL
2.4x.
Enjoy your new maps.
later
【在 m****m 的大作中提到】
: For the Black, I am not sure if this works. Mine is the White DVD.
: I will find the link after work tonight and post detail instructions later
: if BanZhu allows.
http://www.demonoid.me/files/details/2789697/?
load_bal=007049514374&show_files=&page=6
Also there is a BT link to download the seed. Should be easy to find the
White Disk seed.
Then follow the following instructions:
- Update/install IMGBurn on your computer
- Update/install 7zip on your computer
- Using 7zip, extract large 4.A2 white.rar file
- Using 7zip, extract the first of many zipped files that were created
- Using 7zip, extract the ISO that was created to a new folder on your
desktop area
- Copy over these two files (09Jog2.bin, 09Touch2.bin) found elsewhere
in
this forum (that have DRM stripped out) to the new folder overwriting
what’
s inside.
http://www.sendspace.com/file/mbuqvb (09Touch2.bin)
http://www.sendspace.com/file/xwydjs (09Jog2.bin)
- Open IMGBurn and set the burn option to ISO9660 + UDF format, then set
the
ISO9660 label AND the UDF label to the name of the ISO file which is
B120SA2
- Insert a DVD+R DL (dual layer) blank DVD into your drive
- Drag over all 50 files within the new folder to the burn project
window
- Burn to your bland dual layer DVD at 2.4X
- Verify the burned DVD
- Start your engine.
- Remove the White DVD underneath the driver’s seat
- Insert newly created DVD
- Wait about 3 minutes as the software is downloaded from the DVD.
- That’s it!
Important note:
- Do not use WinRAR to extract the ISO (another commenter discovered a
problem using it after several unsuccessful burns)
- Try to close any programs that are open including any antivirus
programs.
This reduces the chance of the open programs crashing your computer
during
the burn process (you never know)
- Burn at the slowest speed possible and do not have your kids running
around the computer to prevent vibration/shock which will yield a bad
burn.
(I burned in 1x first time and failed. Second time, I burned in 2.4x
succeed
.)
- Buy good quality Verbatim blank dual layer DVDs. I used Verbatim DVD+R
DL
2.4x.
Enjoy your new maps.
later
【在 m****m 的大作中提到】
: For the Black, I am not sure if this works. Mine is the White DVD.
: I will find the link after work tonight and post detail instructions later
: if BanZhu allows.
k*x
11 楼
恩,这个不能用于black dvd,不过还是谢谢,发了个包子
【在 m****m 的大作中提到】
: Here is the link to the discuss forum:
: http://www.demonoid.me/files/details/2789697/?
: load_bal=007049514374&show_files=&page=6
: Also there is a BT link to download the seed. Should be easy to find the
: White Disk seed.
: Then follow the following instructions:
: - Update/install IMGBurn on your computer
: - Update/install 7zip on your computer
: - Using 7zip, extract large 4.A2 white.rar file
: - Using 7zip, extract the first of many zipped files that were created
【在 m****m 的大作中提到】
: Here is the link to the discuss forum:
: http://www.demonoid.me/files/details/2789697/?
: load_bal=007049514374&show_files=&page=6
: Also there is a BT link to download the seed. Should be easy to find the
: White Disk seed.
: Then follow the following instructions:
: - Update/install IMGBurn on your computer
: - Update/install 7zip on your computer
: - Using 7zip, extract large 4.A2 white.rar file
: - Using 7zip, extract the first of many zipped files that were created
g*7
13 楼
有LEXUS的地图吗?
谢谢
谢谢
S*i
15 楼
好文,mark
z*0
16 楼
zkss 变通的办法
I got an error while updating new software: "please check you disc"
I used Verbatim DVD+R
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
I got an error while updating new software: "please check you disc"
I used Verbatim DVD+R
【在 m****m 的大作中提到】
: 08年的ACURA TL,地图太老了,新建的小区里的路都是虚线,几个月前在网上看到了可
: 以下载的2012的地图。下载了两个PATCH文件,然后去MICROCENTER买了三片DVD+R DL的
: 盘。每一次做盘失败了,原因大概是我的DVD不能强制设成DVD-ROM。第二次,用了一个
: 变通的办法,又烧了一次,然后LABEL一定要写对,放到车里,启动车子,UPLOAD一次
: 成功。
: 现在车子里面的就是2012的地图,黑心的DEALER要CHARGE 120刀,还美其名曰DEAL。
z*0
19 楼
你是说这个刻两个盘的方法?
Here's how I got it to work in my 07 TL:
Pre-requisite: Determine the make/model of your burner and update its
firmware to the latest version! This will prevent you from making a bunch of
coasters.
1) burn the B120SA2.ISO from this torrent using ImgBurn. No alterations to
the ISO necessary. Use a DVD+R Dual Layer disc. Before burning, set all the
book type settings on your burner to DVD-ROM. You'll need to know the make/
model of your burner to do this in ImgBurn. If you don't know how to set
booktype in ImgBurn, Google it. Burn at 4x or 8x. Set disc aside.
2) download the patched 09Touch2.bin from lopushok's post on the previous
page.
3) Open B120SA2.ISO with WinRAR and copy these files to a folder:
- 09Jog.bin
- 09Jog2.bin
- 09Jog128SZA.bin
- 09Jog128TA0.bin
- 09Touch.bin
- 09Touch2.bin
- A0000_00.MNG
- dca0.evt
- DCA0.reg
- EDATA_ENUS.bin
- EDATA_FRCA.bin
- PRG_INFO.MNG
- UPDATE_APL.exe
4) copy the patched 09Touch2.bin you downloaded earlier into this folder,
replacing the original file
5) Open ImgBurn and go to Mode > Build
6) Choose Input > Advanced from the top menu
7) press the "show disc layout editor" button, and drag the CONTENTS of the
folder you created in step 3 into the compilation. DO NOT drag the actual
folder!
8) In "Options" on the right side of the main window, make sure your
settings are: Mode1/2048, UDF, 1.02. "Recurse Subdirectories" should be the
only thing checked
9) Under Labels > UDF, type in something like "white4A2"
10) Under Advanced > Media > Single Layer > Profile, set this option to the
type of media you're going to use. I had DVD-R discs, so I set it to "DVD-R/
RW". Just use DVD-Rs or DVD+Rs for this disc we're about to burn in step 13.
11) choose an output location and name, then hit the Build button
12) go into Write mode (Mode > Write)
13) choose the .MDS file that got created from your build action and burn
the disc at 4x or 8x. Use a DVD-R or DVD+R.
Grab both discs and go to your car.
14) Insert your key and turn the ignition to ACC position, then pop the
trunk. You can start the engine if you want, but that will only waste gas.
15) remove the factory DVD from the nav unit on the right side of the trunk.
You'll get a message on the nav screen that there's no disc.
16) insert the 2nd disc that you burned onto a DVD-R or DVD+R from step 13.
17) If the software doesn't start updating automagically, hold MAP & MENU &
CANCEL for 5 seconds until you get the diagnostics screen. Then press
Version, then Download.
18) You will get a progress bar that takes about 3 or 4 minutes to complete.
Then nav will reboot and tell you that there's a disc error...contact you
dealer or something like that.
19) remove the disc from the rear nav unit and replace it with the first
disc you burned on the Dual L
Here's how I got it to work in my 07 TL:
Pre-requisite: Determine the make/model of your burner and update its
firmware to the latest version! This will prevent you from making a bunch of
coasters.
1) burn the B120SA2.ISO from this torrent using ImgBurn. No alterations to
the ISO necessary. Use a DVD+R Dual Layer disc. Before burning, set all the
book type settings on your burner to DVD-ROM. You'll need to know the make/
model of your burner to do this in ImgBurn. If you don't know how to set
booktype in ImgBurn, Google it. Burn at 4x or 8x. Set disc aside.
2) download the patched 09Touch2.bin from lopushok's post on the previous
page.
3) Open B120SA2.ISO with WinRAR and copy these files to a folder:
- 09Jog.bin
- 09Jog2.bin
- 09Jog128SZA.bin
- 09Jog128TA0.bin
- 09Touch.bin
- 09Touch2.bin
- A0000_00.MNG
- dca0.evt
- DCA0.reg
- EDATA_ENUS.bin
- EDATA_FRCA.bin
- PRG_INFO.MNG
- UPDATE_APL.exe
4) copy the patched 09Touch2.bin you downloaded earlier into this folder,
replacing the original file
5) Open ImgBurn and go to Mode > Build
6) Choose Input > Advanced from the top menu
7) press the "show disc layout editor" button, and drag the CONTENTS of the
folder you created in step 3 into the compilation. DO NOT drag the actual
folder!
8) In "Options" on the right side of the main window, make sure your
settings are: Mode1/2048, UDF, 1.02. "Recurse Subdirectories" should be the
only thing checked
9) Under Labels > UDF, type in something like "white4A2"
10) Under Advanced > Media > Single Layer > Profile, set this option to the
type of media you're going to use. I had DVD-R discs, so I set it to "DVD-R/
RW". Just use DVD-Rs or DVD+Rs for this disc we're about to burn in step 13.
11) choose an output location and name, then hit the Build button
12) go into Write mode (Mode > Write)
13) choose the .MDS file that got created from your build action and burn
the disc at 4x or 8x. Use a DVD-R or DVD+R.
Grab both discs and go to your car.
14) Insert your key and turn the ignition to ACC position, then pop the
trunk. You can start the engine if you want, but that will only waste gas.
15) remove the factory DVD from the nav unit on the right side of the trunk.
You'll get a message on the nav screen that there's no disc.
16) insert the 2nd disc that you burned onto a DVD-R or DVD+R from step 13.
17) If the software doesn't start updating automagically, hold MAP & MENU &
CANCEL for 5 seconds until you get the diagnostics screen. Then press
Version, then Download.
18) You will get a progress bar that takes about 3 or 4 minutes to complete.
Then nav will reboot and tell you that there's a disc error...contact you
dealer or something like that.
19) remove the disc from the rear nav unit and replace it with the first
disc you burned on the Dual L
相关阅读
求推荐7"或8"的android tablet, 带HDMI输出android的自带的email的问题nook hd+想入SAMSUNG S3att&tmobile gs2有JB升级了。。。貌似下半年atom win8板子要井喷htc butterfly感觉不错啊[求帮助] 找回skydrive的注册信息三星GALAXY S4android4.2.1怎么改系统字体?纠结:100刀的Nook HD还是200刀的Nook HD+?别等helixskype video call 在美国国内是免费的吗?包子求推荐无线机顶盒/播放器Nexus4是没办法拒接电话的吗?For Raspberry Pi or mk808: Motorola Lapdock for ATRIX $49.99Google Maps现在怎么总是乱指路?推荐看电脑电子书籍的e-inkHTC One的trade up试玩了下modern combat