Redian新闻
>
TP如何让默认启动选择CM
avatar
TP如何让默认启动选择CM# PDA - 掌中宝
r*e
1
现在在用 quadro fx1800,想换一块能至少支持3个显示器的。还是pro grade,比如
quadro or firepro,不毕最新的,性价比高就行。现存至少1g吧。偶尔玩游戏。
多谢
avatar
k*7
2
TP webos升级3.05,利用煮机网ipk文件重新恢复了CM启动界面,但是发现每次启动的
时候的默认进入的选项是Webos,请问在哪里可以设置选择默认启动选项啊,谢谢
avatar
r*e
3
周末没大牛?

【在 r***e 的大作中提到】
: 现在在用 quadro fx1800,想换一块能至少支持3个显示器的。还是pro grade,比如
: quadro or firepro,不毕最新的,性价比高就行。现存至少1g吧。偶尔玩游戏。
: 多谢

avatar
a*x
4
改config file.进webos,挺好。

【在 k*******7 的大作中提到】
: TP webos升级3.05,利用煮机网ipk文件重新恢复了CM启动界面,但是发现每次启动的
: 时候的默认进入的选项是Webos,请问在哪里可以设置选择默认启动选项啊,谢谢

avatar
r*e
5
any advices? Thx
avatar
k*7
6
呵呵,能具体点么,其实webos是挺好,主要是进系统太慢了,呵呵,其它也没啥不好
的,另一个就是中文了。言归正传,新手,能讲的具体点么,在那里可以改config
file
avatar
s*t
7
是工作站?一定要用quadro 系列显卡吗?

【在 r***e 的大作中提到】
: 现在在用 quadro fx1800,想换一块能至少支持3个显示器的。还是pro grade,比如
: quadro or firepro,不毕最新的,性价比高就行。现存至少1g吧。偶尔玩游戏。
: 多谢

avatar
B*g
8
co-ask

【在 k*******7 的大作中提到】
: 呵呵,能具体点么,其实webos是挺好,主要是进系统太慢了,呵呵,其它也没啥不好
: 的,另一个就是中文了。言归正传,新手,能讲的具体点么,在那里可以改config
: file

avatar
r*e
9
Yes, it's a 2 xeon with registered memory setup. I don't want the gpu to
drag back the system or make it unstable.
The reason why I'm asking is that it does need somebody really experienced
to pick up the best value card.
avatar
k*7
10
自己up一下吧呵呵
avatar
l*1
11
要说性价比,quadro卡永远是超低性价比.如果你的工作需要quadro卡,比如需要显存
ECC,那你没得选,只有上quadro(还得是高端卡).不然geforce卡不见得更差。系统稳
定性而言,quadro和geforce卡没区别,因为这两条line的区别不在这。
你要是公家出钱,而且是工作需要,比如serious的3D modeling/rendering or visual
computing, 那就上quadro. 建议上Kepler based,要ECC的话,最低quadro K5000.
Kepler比Fermi还是强不少,尤其是想玩游戏的话,kepler quadro不比同级geforce查多
少,而fermi quadro比同级geforce差很多。
自己出钱的话,还是geforce吧,要不上ebay弄个稍微便宜点的quadro 5000 or 6000.

【在 r***e 的大作中提到】
: Yes, it's a 2 xeon with registered memory setup. I don't want the gpu to
: drag back the system or make it unstable.
: The reason why I'm asking is that it does need somebody really experienced
: to pick up the best value card.

avatar
F*y
12
去preware找cyboot,可以随便设置
avatar
r*e
13
it seems only Kepler can take more than 2 monitor.
so the main diff between 2 is ecc? how about firepro?

visual
.

【在 l*******1 的大作中提到】
: 要说性价比,quadro卡永远是超低性价比.如果你的工作需要quadro卡,比如需要显存
: ECC,那你没得选,只有上quadro(还得是高端卡).不然geforce卡不见得更差。系统稳
: 定性而言,quadro和geforce卡没区别,因为这两条line的区别不在这。
: 你要是公家出钱,而且是工作需要,比如serious的3D modeling/rendering or visual
: computing, 那就上quadro. 建议上Kepler based,要ECC的话,最低quadro K5000.
: Kepler比Fermi还是强不少,尤其是想玩游戏的话,kepler quadro不比同级geforce查多
: 少,而fermi quadro比同级geforce差很多。
: 自己出钱的话,还是geforce吧,要不上ebay弄个稍微便宜点的quadro 5000 or 6000.

avatar
k*7
14
非常感谢
avatar
l*1
15
>> so the main diff between 2 is ecc?
quadro cards, if with the same hardware config (e.g., same freq/core count/
mem bandwidth etc.), can have considerably higher triangle throughput rate (
if not being fragment processing limited). This may be true in 3D modeling
types of applications.
I don't know much about firepro.

【在 r***e 的大作中提到】
: it seems only Kepler can take more than 2 monitor.
: so the main diff between 2 is ecc? how about firepro?
:
: visual
: .

avatar
r*e
16
http://www.youtube.com/watch?v=LV3YBhrD_D4
From this video, it seems quadro will be clocked at a lower frequency. So
less frames per sec comparing to gaming cards. But more precisions(ecc?) and
detail.
I agree with you. The firepro seems having only 5% market. That's why I
hesitated. Otherwise the firepro is really good deal, with 400$ I can get 1G
/2G memory and up to 4 monitors.
avatar
l*1
17
>> But more precisions(ecc?) and detail.
With ECC you won't see artifacts, like a very slightly shift of a point on
the surface in your model, due to memory errors during computation. This is
needed for some serious modeling work. For gaming, an error in one or a few
pixels per frame really doesn't matter, so ECC is unnecessary. The level of
details are not determined by the card though.
There are folks playing with bios so that quadro cards can be overclocked,
but I guess you probably don't want to do that if this is not your own card.


and
1G

【在 r***e 的大作中提到】
: http://www.youtube.com/watch?v=LV3YBhrD_D4
: From this video, it seems quadro will be clocked at a lower frequency. So
: less frames per sec comparing to gaming cards. But more precisions(ecc?) and
: detail.
: I agree with you. The firepro seems having only 5% market. That's why I
: hesitated. Otherwise the firepro is really good deal, with 400$ I can get 1G
: /2G memory and up to 4 monitors.

avatar
r*e
18
I don't know. I just want to get a decent gpu with reasonable price. My main
problem with fx 1800 is that it can handle only 2 monitors. But if it's
like k4000, 900$. I think I'll stick with fx 1800

is
few
of
card.

【在 l*******1 的大作中提到】
: >> But more precisions(ecc?) and detail.
: With ECC you won't see artifacts, like a very slightly shift of a point on
: the surface in your model, due to memory errors during computation. This is
: needed for some serious modeling work. For gaming, an error in one or a few
: pixels per frame really doesn't matter, so ECC is unnecessary. The level of
: details are not determined by the card though.
: There are folks playing with bios so that quadro cards can be overclocked,
: but I guess you probably don't want to do that if this is not your own card.
:
:

avatar
r*e
19
最后选了amd w7000,amd在搞活动50% cashback. 我这个3年旧的workstation还能凑合
着用几年。
相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。