i*a
2 楼
发信站: BBS 未名空间站 (Sun Nov 16 11:32:28 2014, 美东)
有没有网购的deal? 不想半夜去跟老墨老黑抢
[发表自未名空间手机版 - m.mitbbs.com]
有没有网购的deal? 不想半夜去跟老墨老黑抢
[发表自未名空间手机版 - m.mitbbs.com]
R*s
4 楼
It's common and most noticeable at high rotation speed settings. The basic
idea is to use counter weight on fan blade to balance it out to some extend.
I assume you no longer have its installation manual. So here is my
suggestions:
1) find a washer with some weight (not the really thin ones)
2) get a rubber hair tie, go through the washer and any blade. Make it tight
enough such that it can stay there without falling off while the fan it
turning.
3) start with center position of one blade, turn the fan on and see if there
is any improvement
4) move the washer closer or further away from the motor and repeat step 3,
until you find the best location
5) if this blade is not good, try another one and repeat step 3 & 4
You should be able to find the best location. If you'd like to be really
careful, you can play with different weight too.
Once you're satisfied, use superglue, tape or whatever to securely fix the
washer on the back side of the blade. Make sure it won't fall off during
operation. You're done.
Let's know how it goes.
【在 P***i 的大作中提到】
: How to fix?
: Thanks!
idea is to use counter weight on fan blade to balance it out to some extend.
I assume you no longer have its installation manual. So here is my
suggestions:
1) find a washer with some weight (not the really thin ones)
2) get a rubber hair tie, go through the washer and any blade. Make it tight
enough such that it can stay there without falling off while the fan it
turning.
3) start with center position of one blade, turn the fan on and see if there
is any improvement
4) move the washer closer or further away from the motor and repeat step 3,
until you find the best location
5) if this blade is not good, try another one and repeat step 3 & 4
You should be able to find the best location. If you'd like to be really
careful, you can play with different weight too.
Once you're satisfied, use superglue, tape or whatever to securely fix the
washer on the back side of the blade. Make sure it won't fall off during
operation. You're done.
Let's know how it goes.
【在 P***i 的大作中提到】
: How to fix?
: Thanks!
P*i
5 楼
Thanks! I will ask my tenant to use the low-speed setting for now.
相关阅读
Google: Gmail users have no expectation of privacy求推荐个蓝牙耳机独立的照相模块可以是手机取代相机的一个方向2刀买了个这货,能干嘛?Google Play 里有不少免费的离线导航 app板上那些托儿...不玩虚的 Surface RT直接对比iPad48% of Top iPad Apps Can’t Be Found on Android SlatesNexus 7 vs Garmin gps?【刷机】Kindle Fire HD 7刷CyanogenMod 10.1有人用过华为ascend p1 (欧版)吗?和电脑usb连接不上谷歌新专利:你看没看广告它知道Dropbox 再增加 1G 容量的办法吐槽windows phoneN7 二代上下黑边太宽了。HTC one 的speaker音質比s4好多了适合女生用的聪明手机ASUS Zenbook用的是什么硬盘接口?哪些国产智能手机可以在美国用3G,LTE限时特惠Barclay Arrival 万事达世界卡免费送400美金,首年无年费