T*e
2 楼
at least please show us the code ba?
【在 c****s 的大作中提到】
: 替换的文字在dvi文件里可以列出来
: 当然不在应该在的位置
: 但是转换成ps或者pdf之后还是原来的文字
: 问题可能出在哪里？
: 多谢先！
【在 c****s 的大作中提到】
: 替换的文字在dvi文件里可以列出来
: 当然不在应该在的位置
: 但是转换成ps或者pdf之后还是原来的文字
: 问题可能出在哪里？
: 多谢先！
c*s
3 楼
here it is... though i do think there must be something else wrong
well, the whole story is, I had a curve printed out as .ps, then
converted the .ps to .fig with pstoedit, then edited it with xfig,
finally exported the .eps
I also tried another way around: imported the .ps into corel draw,
then exported the eps after editting. still the same beep.
%%%%%%%%%%
\begin{figure}
\centering
\psfrag{celsius}{\textcelsius}
\psfrag{Vout}{$V_{out}$}
\includegraphics[width=\textwidth]{fig.eps}
\c
【在 T*******e 的大作中提到】
: at least please show us the code ba?
well, the whole story is, I had a curve printed out as .ps, then
converted the .ps to .fig with pstoedit, then edited it with xfig,
finally exported the .eps
I also tried another way around: imported the .ps into corel draw,
then exported the eps after editting. still the same beep.
%%%%%%%%%%
\begin{figure}
\centering
\psfrag{celsius}{\textcelsius}
\psfrag{Vout}{$V_{out}$}
\includegraphics[width=\textwidth]{fig.eps}
\c
【在 T*******e 的大作中提到】
: at least please show us the code ba?
l*t
4 楼
a wild guess: during pstoedit, your text might be converted to bitmap or
other things which could not be found by psfrag any more.
is the printed .ps working with psfrag?
【在 c****s 的大作中提到】
: here it is... though i do think there must be something else wrong
: well, the whole story is, I had a curve printed out as .ps, then
: converted the .ps to .fig with pstoedit, then edited it with xfig,
: finally exported the .eps
: I also tried another way around: imported the .ps into corel draw,
: then exported the eps after editting. still the same beep.
: %%%%%%%%%%
: \begin{figure}
: \centering
: \psfrag{celsius}{\textcelsius}
other things which could not be found by psfrag any more.
is the printed .ps working with psfrag?
【在 c****s 的大作中提到】
: here it is... though i do think there must be something else wrong
: well, the whole story is, I had a curve printed out as .ps, then
: converted the .ps to .fig with pstoedit, then edited it with xfig,
: finally exported the .eps
: I also tried another way around: imported the .ps into corel draw,
: then exported the eps after editting. still the same beep.
: %%%%%%%%%%
: \begin{figure}
: \centering
: \psfrag{celsius}{\textcelsius}
c*s
5 楼
part of the editting with xfig/corel draw was to rewrite all the texts,
otherwise they are simply heaps of curves or dots. so what psfrag dealt
with were 'real' texts. I once thought corel draw could keep some font
info which cannot be recognized by psfrag, though I explicitly chose
the 'neutral' courier fond. it tured out that even xfig could not accomplish
the mission.
for two reasons i did not try it
1) the texts are not real texts, see above.
2) for sake a resizing, boundaries are needed, s
【在 l******t 的大作中提到】
: a wild guess: during pstoedit, your text might be converted to bitmap or
: other things which could not be found by psfrag any more.
: is the printed .ps working with psfrag?
c*s
6 楼
is it actually possible to make psfrag work on .ps?
includegraphics seems not to be able to take .ps ...
【在 l******t 的大作中提到】
: a wild guess: during pstoedit, your text might be converted to bitmap or
: other things which could not be found by psfrag any more.
: is the printed .ps working with psfrag?
c*s
7 楼
seems that psfrag would only be able to work properly
on the whole string, not part of it.
so if there's a string in the .eps
temperature (celsius)
and following substitution is done in .tex
\psfrag{celsius}{\textcelsius}
it'd be listed in .dvi, but not in .ps, nor in .pdf
so instead, do
\psfrag{temperature (celsius)}{temperature (\textcelsius)}
【在 c****s 的大作中提到】
: 替换的文字在dvi文件里可以列出来
: 当然不在应该在的位置
: 但是转换成ps或者pdf之后还是原来的文字
: 问题可能出在哪里？
: 多谢先！
on the whole string, not part of it.
so if there's a string in the .eps
temperature (celsius)
and following substitution is done in .tex
\psfrag{celsius}{\textcelsius}
it'd be listed in .dvi, but not in .ps, nor in .pdf
so instead, do
\psfrag{temperature (celsius)}{temperature (\textcelsius)}
【在 c****s 的大作中提到】
: 替换的文字在dvi文件里可以列出来
: 当然不在应该在的位置
: 但是转换成ps或者pdf之后还是原来的文字
: 问题可能出在哪里？
: 多谢先！
相关阅读
latex to html 转换如何把图放在想放的位置.A question about footnote如何分开粘连的图表，把表格放在想放的位置问个latex的问题(关于fancyheader)这个错误信息是什么意思啊？Re: LaTeX table可以缩小一点么？ (转载)draw relation charta question of xfig, heheany one use tex2im?table可以缩小一点么？不错建议本版改个名字,免得和texas撞上了eps图像求助！ "图像使用了在某些应用程序中无法正确分色的色彩空间"请问怎么改变enumerate中item 标注的Bibtex 软件一个对齐的问题change bibliography to references, not centered anymore建议有空的同志们作点基本工作how to put a footnote on a chapter title?