锂电池的工作机会# ChemEng - 化学工程
a*n
1 楼
纽约附近的start up公司，电池部门需要找有锂电池工作经验或者研究经验的人，电容
器或者镍镉电池的也可以。
公司环境很好。同事都很好相处。
如果是应届毕业生明年一月以前能毕业才可以。
有兴趣的发简历到我邮箱，我会转发给部门manager。
器或者镍镉电池的也可以。
公司环境很好。同事都很好相处。
如果是应届毕业生明年一月以前能毕业才可以。
有兴趣的发简历到我邮箱，我会转发给部门manager。
a*n
2 楼
怎么转发到工程版面？ 请帮忙转发到工程，化学，和纳米科技版面。谢谢
l*n
3 楼
谢谢LZ提供的信息。我想试试。我是做固态锂离子电池的。solid state Li-ion
battery. 今年年底答辩，明年1月之前肯定能够上班。我把简历发给你看看
battery. 今年年底答辩，明年1月之前肯定能够上班。我把简历发给你看看
a*n
4 楼
Senior Test Engineer (high-end)
Roles & Responsibilities:
• Development and operation of Li-ion battery assembly process
• Hands-on operation of aqueous and non-aqueous electrochemical
battery test equipment, interpretation of results and development of
operating parameters.
• Hands-on operation of diagnostic instruments such as
electrochemical impedance spectrometry, and performing test of thermal
cycling stability, mechanical durability, failure mode and hazard
identification.
• Data collection, analysis, documentation and report.
• Determine optimum operating conditions, design parameters of
battery packs, cell life and aging characteristics, and usage in dynamic
environment.
• Communicate and interact closely with other engineering staff
responsible for developing electrode materials, battery cells and packs,
including: new concept exploration, prototype units and working production
lines.
• Assist in the establishment of the R&D battery test labs, and the
development and documentation of standard operating procedures and safety
procedures for pilot process capabilities and analytical test capabilities
as needed.
• Establish appropriate calibration and maintenance programs and
schedules for test systems to ensure accuracy and repeatability of
measurements.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• Minimum 5 years of experience in battery or power electronics
design and operation, or production environment.
• Experience with advanced rechargeable lithium battery and polymer
battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of carbon, ceramic
and polymer materials preferred.
• High degree of mechanical aptitude and assembly skills preferred
• Able to work in a production environment and low humidity
environment as needed.
• Knowledge of quality control methods and techniques.
• Successful track record of delivering test results and
development goals accurately, on time and on budget.
Battery Development Engineer, R&D (entry)
Roles & Responsibilities:
• Hands-on fabrication of electrode materials and coatings.
• Hands-on operation of battery test equipment, interpret result
and prepare reports.
• Create and input test scripts for computer controlled automation
of tests.
• Assist in the establishment of the R&D battery test labs.
• Follow standard operating and safety procedures for battery test.
• Support other engineering staff as needed.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience with advanced rechargeable lithium battery
and polymer battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of film processing,
carbon, ceramic and polymer materials preferred.
Processing Engineer, R&D
Roles & Responsibilities:
• Hands-on fabrication and characterization of electrode slurries
and coatings.
• Evaluation and optimization of battery engineering techniques,
procedures and criteria.
• Conceptual designs of battery prototypes and process development
of prototype fabrication and test.
• Interfacing with customers in the context of prototype designs
and application development.
• Support other engineering staff as needed.
Requirements:
• B.S. or M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience in chemical or industrial process or
equipment design.
• Knowledge of advanced batteries, film processing, carbon, ceramic
and polymer materials preferred.
发现招人也不容易，
简历发给x***[email protected],d**[email protected]
Roles & Responsibilities:
• Development and operation of Li-ion battery assembly process
• Hands-on operation of aqueous and non-aqueous electrochemical
battery test equipment, interpretation of results and development of
operating parameters.
• Hands-on operation of diagnostic instruments such as
electrochemical impedance spectrometry, and performing test of thermal
cycling stability, mechanical durability, failure mode and hazard
identification.
• Data collection, analysis, documentation and report.
• Determine optimum operating conditions, design parameters of
battery packs, cell life and aging characteristics, and usage in dynamic
environment.
• Communicate and interact closely with other engineering staff
responsible for developing electrode materials, battery cells and packs,
including: new concept exploration, prototype units and working production
lines.
• Assist in the establishment of the R&D battery test labs, and the
development and documentation of standard operating procedures and safety
procedures for pilot process capabilities and analytical test capabilities
as needed.
• Establish appropriate calibration and maintenance programs and
schedules for test systems to ensure accuracy and repeatability of
measurements.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• Minimum 5 years of experience in battery or power electronics
design and operation, or production environment.
• Experience with advanced rechargeable lithium battery and polymer
battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of carbon, ceramic
and polymer materials preferred.
• High degree of mechanical aptitude and assembly skills preferred
• Able to work in a production environment and low humidity
environment as needed.
• Knowledge of quality control methods and techniques.
• Successful track record of delivering test results and
development goals accurately, on time and on budget.
Battery Development Engineer, R&D (entry)
Roles & Responsibilities:
• Hands-on fabrication of electrode materials and coatings.
• Hands-on operation of battery test equipment, interpret result
and prepare reports.
• Create and input test scripts for computer controlled automation
of tests.
• Assist in the establishment of the R&D battery test labs.
• Follow standard operating and safety procedures for battery test.
• Support other engineering staff as needed.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience with advanced rechargeable lithium battery
and polymer battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of film processing,
carbon, ceramic and polymer materials preferred.
Processing Engineer, R&D
Roles & Responsibilities:
• Hands-on fabrication and characterization of electrode slurries
and coatings.
• Evaluation and optimization of battery engineering techniques,
procedures and criteria.
• Conceptual designs of battery prototypes and process development
of prototype fabrication and test.
• Interfacing with customers in the context of prototype designs
and application development.
• Support other engineering staff as needed.
Requirements:
• B.S. or M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience in chemical or industrial process or
equipment design.
• Knowledge of advanced batteries, film processing, carbon, ceramic
and polymer materials preferred.
发现招人也不容易，
简历发给x***[email protected],d**[email protected]
相关阅读
Amex 开卡送1000刀 Gold Premier Card Match 75K points bonusAmex 送一千刀 Gold Premier Card Match 75000 points bonus老公被雷了，恳请各位知道openning的给个消息吧ECS meeting roommateAmex 开卡送1000刀 Gold Premier Card Match 75K points bonus请教一个催化剂和脱硫剂的强度的问题Amex 开卡送1800刀 Gold Premier Card Match 125K points bonusA postdoctoral research fellow position is available类似金属，但是非导体的散热材料？ (转载)康奈尔大学生物材料工程有个Tenure-track助理教授职位Amex Gold Premier Card Match 75000 points bonusAmex 开卡送1800刀 Gold Premier Card Match 125K points bonusAmex 开卡送1000刀 Gold Premier Card Match 75K points bonus免费送酒店入住 25000 SPG Points Bonus 赶快申请SPG 信用卡请教各位大牛关于化工方面的工作Discover More Card- $150 CashBack Bonus 赶紧申请Amex 开卡送1000刀 Gold Premier Card Match 75K points bonusPostdoctoral Position in Engineering of Polymeric BiomaterialsPost Doc. opportunities at UW-Madison免费送最高$250 Amazon GC 任意消费一笔SPG 信用卡