How to add network card under solaris? - 未名空间MITBBS历史存档

国际科技财经博客移民网络热点娱乐民生时事公众号

Redian新闻

>未名空间

>Unix - 噫吁兮，危乎高哉

How to add network card under solaris?

How to add network card under solaris?# Unix - 噫吁兮，危乎高哉

z*f2002-12-22 08:12

1 楼

Just installed solaris on pc. The configuration of network interface failed
during installation. I guess the card (don't know the name) is not supported
by solaris.So I changed it with a Kingston card. when booting, run the
assistant again, it shows the network card is DEC, is this correct? And how to
configure it so that I can bring the interface up?
please give some guidance. Thanks.

W*n2002-12-22 08:12

2 楼

This is what I did on HP vectra
with nisplus
1. Install solaris 8 with non network.
2. Apply patch to support 3com3c905
at access1.sun.com , download
109867-03 109866-03
3. Edit /etc/driver_aliases
add one item:
elxl "pci10b7,1000"
4. Run devlinks
5. Edit /etc/hosts, Content
127.0.0.1 localhost
IP******** spica loghost
IP******** nisplus server
6. Create a file /etc/hostname.elxl0
content
hostname
7. touch /reconfigure , reboot. run ifconfig -

【在 z***f 的大作中提到】

: Just installed solaris on pc. The configuration of network interface failed
: during installation. I guess the card (don't know the name) is not supported
: by solaris.So I changed it with a Kingston card. when booting, run the
: assistant again, it shows the network card is DEC, is this correct? And how to
: configure it so that I can bring the interface up?
: please give some guidance. Thanks.

m*m2002-12-22 08:12

3 楼

I will suggest try the following first before try Waypin's method.
it doesn't matter if it reads as a Dec card or not. I assume you used -r
option when load the solaris. find the name/id for the card, elx01 or etc,
this will appear when you boot up. then "ifconfig elx01 plumb", then you use
"ifconfig -a" you should see the card.
if you can't get the card working better get a 3com905b or 3com905c. both
works well with solaris Intel 8 after 10/01 release.

have two items.
failed
supported
how to

【在 W****n 的大作中提到】

: This is what I did on HP vectra
: with nisplus
: 1. Install solaris 8 with non network.
: 2. Apply patch to support 3com3c905
: at access1.sun.com , download
: 109867-03 109866-03
: 3. Edit /etc/driver_aliases
: add one item:
: elxl "pci10b7,1000"
: 4. Run devlinks