avatar
y*n
1
I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
bulb out" error.
Tried multiple capacitor based decoders and no luck so far. The closest one
suppresses the error while the car is started and running slow; however as
soon as I step on the gas, the error comes back - make me wonder if it's due
to the variation in the alternator voltage?
Here is the Amazon link:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Anyone on this board has found a working capacitor based decoder for BMW
vehicles?
Thanks in advance.
avatar
j*0
2
Don't fuck with cambus. For a light bulb not worth it.
The error is current flow error. Halogen more power more current. The
current flow is a build in parameter in cambus. led less power low current
flow then cambus thinks light bulb is dead. Add an appropriate resister into
led circuit. The LED manufacturer should have the correct current make up
circuit build in. For your case, apparently it is not correct.

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

avatar
y*n
3
Frankly your post has no valuable information.
My plan is simple - either find a working capacitor; or code the car
computer to bypass the bulb check for the DRL.

into

【在 j******0 的大作中提到】
: Don't fuck with cambus. For a light bulb not worth it.
: The error is current flow error. Halogen more power more current. The
: current flow is a build in parameter in cambus. led less power low current
: flow then cambus thinks light bulb is dead. Add an appropriate resister into
: led circuit. The LED manufacturer should have the correct current make up
: circuit build in. For your case, apparently it is not correct.
:
: "
: one
: due

avatar
j*0
4
neither plan is simple.
谁知道你的LED是哪家山寨企业生产的。
自身阻抗多少?通用件还是BMW专用件?如果后者,就自带欺骗线路了。那么就是这个
欺骗线路做的不对,要再改更麻烦。得加个可变电容或电阻自己调。
cambus 手持decoder,谁知到是否code全?你试下才知道。
这里是菜车论坛,到bimmerfest去看看。
我是用inpa 刷的,2008版软件 找台WinXP电脑才能用。E66 七系前四年的乘客座带按
摩,按摩一启动乘客座的气囊就报警。得把气囊disable掉。搞了很久。你有能力就
inpa刷,还便宜。

【在 y***n 的大作中提到】
: Frankly your post has no valuable information.
: My plan is simple - either find a working capacitor; or code the car
: computer to bypass the bulb check for the DRL.
:
: into

avatar
d*3
5
重新买带电阻的led bulb,可以解决问题。否则要用软件把warning给消掉,那个比较
麻烦, 要买usb to obd2的线,还要装NSC Expert等等,还是重新买灯泡简单
avatar
E*a
6
换车吧
avatar
n*s
7
Page not found.

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

avatar
y*n
8
All-in-one的LED灯泡首先塞不进E63狭小封闭的灯室,而且这种灯泡4000 lumen起步,
发热量很大,在封闭的灯室里不安全。电阻decoder,要大量发热,电容类的decoder发
热很小,但试了好几家的产品都不能清除error message。
估计NCS Expert是唯一可行方案。

neither plan is simple.

【在 j******0 的大作中提到】
: neither plan is simple.
: 谁知道你的LED是哪家山寨企业生产的。
: 自身阻抗多少?通用件还是BMW专用件?如果后者,就自带欺骗线路了。那么就是这个
: 欺骗线路做的不对,要再改更麻烦。得加个可变电容或电阻自己调。
: cambus 手持decoder,谁知到是否code全?你试下才知道。
: 这里是菜车论坛,到bimmerfest去看看。
: 我是用inpa 刷的,2008版软件 找台WinXP电脑才能用。E66 七系前四年的乘客座带按
: 摩,按摩一启动乘客座的气囊就报警。得把气囊disable掉。搞了很久。你有能力就
: inpa刷,还便宜。

avatar
y*n
9
对于理工男,用NCS Expert不会是问题;网上很多人说这个工具"super easy"。

【在 d*******3 的大作中提到】
: 重新买带电阻的led bulb,可以解决问题。否则要用软件把warning给消掉,那个比较
: 麻烦, 要买usb to obd2的线,还要装NSC Expert等等,还是重新买灯泡简单

avatar
y*n
10
昨天花了点时间搞定了NCSExpert,取消了DRL的cold and hot monitoring;顺带把讨厌
无比的legal disclaimer一并取消,又加了console的数字速度显示。
好像还有无数可以玩的设定,以后有空再弄吧。

"
one
due

【在 y***n 的大作中提到】
: I replaced the halogen DRL bulbs with LED ones and the CANBUS produces the "
: bulb out" error.
: Tried multiple capacitor based decoders and no luck so far. The closest one
: suppresses the error while the car is started and running slow; however as
: soon as I step on the gas, the error comes back - make me wonder if it's due
: to the variation in the alternator voltage?
: Here is the Amazon link:
: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
: Anyone on this board has found a working capacitor based decoder for BMW
: vehicles?

avatar
j*0
11
中控开机显示改掉,加些中文字,比如, “主人,。。。”

【在 y***n 的大作中提到】
: 昨天花了点时间搞定了NCSExpert,取消了DRL的cold and hot monitoring;顺带把讨厌
: 无比的legal disclaimer一并取消,又加了console的数字速度显示。
: 好像还有无数可以玩的设定,以后有空再弄吧。
:
: "
: one
: due

相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。