b*h
2 楼
1。父母在国内办了 “父女+ 母女关系公证”
这边要求我出生证(公证),是否等同使用?
2。另外,file 485,党员关系如实填吗?
多谢!
这边要求我出生证(公证),是否等同使用?
2。另外,file 485,党员关系如实填吗?
多谢!
n*e
3 楼
fireplace前有一小块瓷砖,铺地板怎么处理?上次问过从哪头开始铺,看样子比较合
理的是从右边顶上开始,但刚好第一排就碰到那块瓷砖了,是不是分别从顶上和底边开
始往瓷砖方向铺,可是到了瓷砖怎么办,瓷砖不太高,spacer好像不太好固定啊。
理的是从右边顶上开始,但刚好第一排就碰到那块瓷砖了,是不是分别从顶上和底边开
始往瓷砖方向铺,可是到了瓷砖怎么办,瓷砖不太高,spacer好像不太好固定啊。
p*a
4 楼
bump
m*f
6 楼
加trim...
但是你的hearth extension太低了...
但是你的hearth extension太低了...
w*a
7 楼
1102w什么价格?
R*s
11 楼
Grow from the walls on both sides of the tile section. It's better to have
some kind of reference to guide you (a laser or a wire) such that both sides
grow follow the same parallel line. When they pass the tile line, you will
have to notch a board or two. But that's doable. If you plan carefully, you
can avoid the notch cut for this location. But, in general, you probably
have to make notch cut at some other locations anyway. So you may need to
practice it.
Going back to laying the plank now. If you find that both sides are not
growing in parallel, you need need to make some adjustment to the row
closest to the wall at the right-hand side of of tiles. I don't know whether
you're going to use baseboard or quarter round and how wide they're. The
quarter round I used is wide enough to cover a small amount of adjustment.
Don't forgot to adjust the spacers too. The ones that came from my board's
manufacture is triangle-shaped. So I can get any thickness within a range.
The ones from HomeDepot can only give you 3 or 4 discrete thickness, thus
less flexible. Another trick you can do is to start the first row with half
planks, not full plank. This way you can just cut another plank for the
adjustment you want.
For the spacers on the tiles, you will need something to support them
initially, a tape, a paper board, even play dough. Once your hammer the
planks against it, you can put tapes on both sides so that they will not
fall.
I hope these helps.
【在 n*******e 的大作中提到】
: fireplace前有一小块瓷砖,铺地板怎么处理?上次问过从哪头开始铺,看样子比较合
: 理的是从右边顶上开始,但刚好第一排就碰到那块瓷砖了,是不是分别从顶上和底边开
: 始往瓷砖方向铺,可是到了瓷砖怎么办,瓷砖不太高,spacer好像不太好固定啊。
some kind of reference to guide you (a laser or a wire) such that both sides
grow follow the same parallel line. When they pass the tile line, you will
have to notch a board or two. But that's doable. If you plan carefully, you
can avoid the notch cut for this location. But, in general, you probably
have to make notch cut at some other locations anyway. So you may need to
practice it.
Going back to laying the plank now. If you find that both sides are not
growing in parallel, you need need to make some adjustment to the row
closest to the wall at the right-hand side of of tiles. I don't know whether
you're going to use baseboard or quarter round and how wide they're. The
quarter round I used is wide enough to cover a small amount of adjustment.
Don't forgot to adjust the spacers too. The ones that came from my board's
manufacture is triangle-shaped. So I can get any thickness within a range.
The ones from HomeDepot can only give you 3 or 4 discrete thickness, thus
less flexible. Another trick you can do is to start the first row with half
planks, not full plank. This way you can just cut another plank for the
adjustment you want.
For the spacers on the tiles, you will need something to support them
initially, a tape, a paper board, even play dough. Once your hammer the
planks against it, you can put tapes on both sides so that they will not
fall.
I hope these helps.
【在 n*******e 的大作中提到】
: fireplace前有一小块瓷砖,铺地板怎么处理?上次问过从哪头开始铺,看样子比较合
: 理的是从右边顶上开始,但刚好第一排就碰到那块瓷砖了,是不是分别从顶上和底边开
: 始往瓷砖方向铺,可是到了瓷砖怎么办,瓷砖不太高,spacer好像不太好固定啊。
v*o
12 楼
什么deal啊?出门一趟就错过了?
R*s
14 楼
another idea for you ...
sides
will
you
whether
【在 R***s 的大作中提到】
: Grow from the walls on both sides of the tile section. It's better to have
: some kind of reference to guide you (a laser or a wire) such that both sides
: grow follow the same parallel line. When they pass the tile line, you will
: have to notch a board or two. But that's doable. If you plan carefully, you
: can avoid the notch cut for this location. But, in general, you probably
: have to make notch cut at some other locations anyway. So you may need to
: practice it.
: Going back to laying the plank now. If you find that both sides are not
: growing in parallel, you need need to make some adjustment to the row
: closest to the wall at the right-hand side of of tiles. I don't know whether
sides
will
you
whether
【在 R***s 的大作中提到】
: Grow from the walls on both sides of the tile section. It's better to have
: some kind of reference to guide you (a laser or a wire) such that both sides
: grow follow the same parallel line. When they pass the tile line, you will
: have to notch a board or two. But that's doable. If you plan carefully, you
: can avoid the notch cut for this location. But, in general, you probably
: have to make notch cut at some other locations anyway. So you may need to
: practice it.
: Going back to laying the plank now. If you find that both sides are not
: growing in parallel, you need need to make some adjustment to the row
: closest to the wall at the right-hand side of of tiles. I don't know whether
n*e
17 楼
我会装baseboard,如果只是小的调整,应该不会露出来,你说的三角形spacer长什么
样,能不能发张图上来,如果真的需要调整宽度,是不是动了spacer以后,还要在敲一
遍,重新固定?
sides
will
you
whether
【在 R***s 的大作中提到】
: Grow from the walls on both sides of the tile section. It's better to have
: some kind of reference to guide you (a laser or a wire) such that both sides
: grow follow the same parallel line. When they pass the tile line, you will
: have to notch a board or two. But that's doable. If you plan carefully, you
: can avoid the notch cut for this location. But, in general, you probably
: have to make notch cut at some other locations anyway. So you may need to
: practice it.
: Going back to laying the plank now. If you find that both sides are not
: growing in parallel, you need need to make some adjustment to the row
: closest to the wall at the right-hand side of of tiles. I don't know whether
样,能不能发张图上来,如果真的需要调整宽度,是不是动了spacer以后,还要在敲一
遍,重新固定?
sides
will
you
whether
【在 R***s 的大作中提到】
: Grow from the walls on both sides of the tile section. It's better to have
: some kind of reference to guide you (a laser or a wire) such that both sides
: grow follow the same parallel line. When they pass the tile line, you will
: have to notch a board or two. But that's doable. If you plan carefully, you
: can avoid the notch cut for this location. But, in general, you probably
: have to make notch cut at some other locations anyway. So you may need to
: practice it.
: Going back to laying the plank now. If you find that both sides are not
: growing in parallel, you need need to make some adjustment to the row
: closest to the wall at the right-hand side of of tiles. I don't know whether
m*f
22 楼
hearth extension是必须的, 有code
d*0
23 楼
http://www.nachi.org/forum/f20/gas-only-fireplace-hearth-requir
Most modern gas only fireplaces with fixed glass do not require a hearth
extension. The manufacturers usually require a 36" clear space in front (no
furniture, etc.). Now if this was a wood burning fireplace that had a gas
insert, the hearth extension would still be required. Once wood burning,
always wood burning.
As a matter of terminology. The "hearth" is the "floor" located within the
firebox, whether wood burning or gas. The "hearth extension" is the non-
combustible material found in front of a fireplace. Both should be inspected
. To call the "hearth extension" a "hearth" is common with many inspectors,
but it is incorrect.
Most modern gas only fireplaces with fixed glass do not require a hearth
extension. The manufacturers usually require a 36" clear space in front (no
furniture, etc.). Now if this was a wood burning fireplace that had a gas
insert, the hearth extension would still be required. Once wood burning,
always wood burning.
As a matter of terminology. The "hearth" is the "floor" located within the
firebox, whether wood burning or gas. The "hearth extension" is the non-
combustible material found in front of a fireplace. Both should be inspected
. To call the "hearth extension" a "hearth" is common with many inspectors,
but it is incorrect.
d*0
25 楼
http://www.houzz.com/discussions/31602/I-don-t-see-a-hearth--on
motherbear The fireplace is totally for looks & ambiance. It's gas,
behind glass. I bet that gets you around code.
24 months ago · Like
COASTROAD Hearth & Patio Mother bear is correct. Gas fireplaces do not
require hearth extensions by code, but may require one IF the installation
manual of the fireplace says it does. That particular fireplace does not
require a non-combustible hearth extension in the installation manual.
motherbear The fireplace is totally for looks & ambiance. It's gas,
behind glass. I bet that gets you around code.
24 months ago · Like
COASTROAD Hearth & Patio Mother bear is correct. Gas fireplaces do not
require hearth extensions by code, but may require one IF the installation
manual of the fireplace says it does. That particular fireplace does not
require a non-combustible hearth extension in the installation manual.
d*0
26 楼
好像是对的。 gas fireplace 没有要求。 你弄掉好了。 简单而且好看。
R*s
29 楼
I don't have it with me. But here is a video link, you can see it around 1:
18.
https://harmonics-flooring.com/InformationResources/Installation#prettyPhoto
If you do it carefully, you only need to adjust the spacer. No need to take
everything apart and re-hammer. Like I said, use a laser or a wire as a
guide.
【在 n*******e 的大作中提到】
: 我会装baseboard,如果只是小的调整,应该不会露出来,你说的三角形spacer长什么
: 样,能不能发张图上来,如果真的需要调整宽度,是不是动了spacer以后,还要在敲一
: 遍,重新固定?
:
: sides
: will
: you
: whether
18.
https://harmonics-flooring.com/InformationResources/Installation#prettyPhoto
If you do it carefully, you only need to adjust the spacer. No need to take
everything apart and re-hammer. Like I said, use a laser or a wire as a
guide.
【在 n*******e 的大作中提到】
: 我会装baseboard,如果只是小的调整,应该不会露出来,你说的三角形spacer长什么
: 样,能不能发张图上来,如果真的需要调整宽度,是不是动了spacer以后,还要在敲一
: 遍,重新固定?
:
: sides
: will
: you
: whether
n*e
31 楼
我还真找不到哪有卖这种spacer的,你说的办法绳子怎么固定在两边墙上呢,激光器要
哪种?
prettyPhoto
take
【在 R***s 的大作中提到】
: I don't have it with me. But here is a video link, you can see it around 1:
: 18.
: https://harmonics-flooring.com/InformationResources/Installation#prettyPhoto
: If you do it carefully, you only need to adjust the spacer. No need to take
: everything apart and re-hammer. Like I said, use a laser or a wire as a
: guide.
哪种?
prettyPhoto
take
【在 R***s 的大作中提到】
: I don't have it with me. But here is a video link, you can see it around 1:
: 18.
: https://harmonics-flooring.com/InformationResources/Installation#prettyPhoto
: If you do it carefully, you only need to adjust the spacer. No need to take
: everything apart and re-hammer. Like I said, use a laser or a wire as a
: guide.
相关阅读
有割草机,还要trimmer吗?50万美元在香港可以买啥房:18平方的34年楼龄房3rd week of attorney review利率一时半会涨不了你们能接受异地的模式吗?Homedepot草籽半价今天30年的利率好像不错大家有喜欢看连环画的吗?求助:缓解老年人眼睛干涩的眼药水关于买房pre approval的问题[合集] 这个版也开始没劲了short-sale的房子roof18年了3选1,请帮忙看看怎么选。是不是床有床头板和床尾板比较好?homedepot整屋换地板手工费才不到500.为什么大家还要找contractor 谢谢像不?2013年3月包子奖励第一次下正式offer这些木头框和门上的坑坑洼洼有什么简单的方式能diy解决么?这是什么野草? (转载)