laminate stairs DIY exp share# Living
S*O
1 楼
picture 1 & 2 show the before and after. 3rd pic is for the instruction ref.
here is how:
Stairs (Enclosed Stairways Only)
If you have an open stairway (no wall on each side), you must have a carpenter
do all the finishing.
1. When installing stairs, there is no need to have an expansion joint.
The floor will not float, it will be glued or nailed down.
2. Measure and cut the laminate to fit the tread and the riser, leaving
room for the track of the stairnose. Make sure that you measure ca
here is how:
Stairs (Enclosed Stairways Only)
If you have an open stairway (no wall on each side), you must have a carpenter
do all the finishing.
1. When installing stairs, there is no need to have an expansion joint.
The floor will not float, it will be glued or nailed down.
2. Measure and cut the laminate to fit the tread and the riser, leaving
room for the track of the stairnose. Make sure that you measure ca