Re: 靠，找到原因了# Automobile - 车轮上的传奇
f*y
1 楼
it is pretty easy to bleed air.
do you have manuals? It should have complete descriptions.
usually there is a bleeding screw
on thermostat housing. it is a small bolt with a hole
at the center.
open it slightly. add coolant into radiator until
no air bubble comes out and you can see steady coolant
flow down from the bleed screw.
tighten the bleed screw to 6-7ft*lbs, or slightly with
a 3/8 rachet.
open heat lever in your car to HOTEST, with radiator
cap open, run engine until it warms up (wait fo
do you have manuals? It should have complete descriptions.
usually there is a bleeding screw
on thermostat housing. it is a small bolt with a hole
at the center.
open it slightly. add coolant into radiator until
no air bubble comes out and you can see steady coolant
flow down from the bleed screw.
tighten the bleed screw to 6-7ft*lbs, or slightly with
a 3/8 rachet.
open heat lever in your car to HOTEST, with radiator
cap open, run engine until it warms up (wait fo