Redian新闻
>
办绿卡,找审稿机会
avatar
办绿卡,找审稿机会# Biology - 生物学
q*i
1
所有的文章是不是要同一研究方向?
在国内研究的是炎症性疾病,到美国后研究的是癌症.
是不是不要前面关于炎症性疾病的文章?
谢谢!
avatar
f*i
2
The solutions listed in the titles are all for Android.
Talkatone is an IPhone port. I presume it is the way to go with IPhone.
WP is a sad story.Theoretically the PBXes relay solution would work for WP
if a generic SIP client can be found. However, none can be found so far.
Even then, you will need to figure out a way to keep wifi alive under screen
saver. Check off WP if free GV over wifi is your must-have.
Here are the reviews of the solutions:
==========
Groove IP:
This is the simplest solution. Fire up the software, enter your gmail id and
password and your are ready to make outbound calls and answer the inbound
calls. Since this from a 3rd party, I would create a spare gmail id just for
it.
pro: You vs. GV with no relay in between. Simplicity == Reliablility == ~100
% availability. The paid/bootleg version is non-intrusive.
con: You vs. GV with no relay in between. No compression == poor sound
quality at times == hard to maintain a conversation with poor wifi
connection. Unable to switch TCP/IP port == You have no monkey to play with
if the firewall does not open the ports (63?) used by GV, which is more
often than not the case with many wifi hotspots.
Verdict: Good solution if you have good wifi.
========
Talkatone: Very similar to Groove IP except that Talkatone has servers to go
between you and GV.
pro: The sound quality is much better than GrooveIP.
con: Expensive to remove the ad. The subscription has recuring charges that
totally cancels the purpose of using it. The ad version is rather annoying
and intrusive.
Verdict: Good back up.
==========
PBXes relay + Sip clients (SipDroid,CSipSimple, etc)
You can get a free account on PBXes to turn your GV account into a free SIP
account and make/receive calls with a generic SIP client. The most popular
client to go with PBXes is SipDroid because it sets up a free PBXes account
for you upon the first launch.
The PBXes account is rather complicated. But you need only to concern
yourself with 2 settings:
Trunk: This is the GV facing side. Replace the Sipdroid entered gmail
account with the one you want to use. Again, you don't want to use your main
gmail account here.
Extension: This is the sip client facing side. SipDroid always create a <
MainId>-200 extension with a secret password for itself. If you can figure
out what the password is, you can use the extension in a generic SIP client.
Alternatively, you can create another extension, or simply change that
secret password to your own password.
===========
SipDroid:
A piece of jewel/crap like German cars.If you know what you are doing, this
software gives you tons of stuff to tinker with. The phone UI is horrendous
just like any Made in Germany stuff. You have to use the menu key to bring
up the speaker / mute / etc. Nothing is intuitive. German,you know.
There is room for 2 SIP lines/accounts. PBXes.org is the default server. The
first line/account is pre-populated when SipDroid created your PBXes
account. The second line/account needs to be entered manually. It is usually
where people get stuck. When SipDroid create your free account, it gives a
secret password for the extension. Log in to PBXes.org and change the
extension password to something you know. And you should have no problem
getting both lines registered.
Both lines will use the default 5601 port. Change the second one to
something else, e.g. 5900. And you will have 2 perfect functional GV lines
in one phone.
pro: There is always a solution for any issue you encounter. You can pick an
open port to get around a firewall, for example.The connection/reconnection
under poor wifi is rock solid. The phone rings reliably even when the wifi
is not strong enough to make a conversation.
con: The phone UI is a major piece of crap. Get used to find things under
the menu button. The default codec is the best one but it requires good wifi
. Lower it if you wifi cannot take the load.
Verdict: For the DIYers.
=================
CSipSimple:
This is a drop in replacement for SipDroid. Find the PBXes under the
international providers and enter the SipDroid Extention id and password and
your are good to go.
You can have unlimited number of lines/accounts. However, there is no way to
set ports. If you have 2 PBXes lines, you can still make outbound calls
from either line perfectly. But only one of them will ring incoming calls. I
cannot figure out what determines the winner. I suspect it is the
registering order.
pros: The best phone UI of all. Beautiful and intuitive. Best echo
cancellation of all.
cons: Having trouble stay connected under poor wifi. If a connection attempt
chokes in the middle of the night, it stays choked until your open up the
app in the morning. If you don't want to miss call. This con alone kills the
deal. The default codec is a poorer one. Hence the voice quality isn't very
good. Up the setting if you have good wifi.
Verdict: For good wifi only.
avatar
p*e
3
大家都怎么找的啊,联系了几个杂志发现,一般chief editor不管具体的事情,负责找
reviewer的都是associate editor, 这些人都是working scientist,同领域的都是老
板熟人/敌人什么的,实在拉不下脸来去谈review这种非science的事情啊,大家给支支
招怎么办吧。
avatar
s*t
4
都是医学领域嘛。IO不会关心你具体是哪个方向。

【在 q*****i 的大作中提到】
: 所有的文章是不是要同一研究方向?
: 在国内研究的是炎症性疾病,到美国后研究的是癌症.
: 是不是不要前面关于炎症性疾病的文章?
: 谢谢!

avatar
z*3
5
talkatone确实品质好些 不过要按月收费
一般人groove lite就够用
avatar
m*s
6
帝国主义江河日下
祖国伟大蒸蒸日上
为猫还要申请绿卡?

【在 p*****e 的大作中提到】
: 大家都怎么找的啊,联系了几个杂志发现,一般chief editor不管具体的事情,负责找
: reviewer的都是associate editor, 这些人都是working scientist,同领域的都是老
: 板熟人/敌人什么的,实在拉不下脸来去谈review这种非science的事情啊,大家给支支
: 招怎么办吧。

avatar
q*i
7
thanks!
avatar
s*a
8
搞到最后还是好wifi代表一切啊,
avatar
p*e
9
一起回去?

【在 m*****s 的大作中提到】
: 帝国主义江河日下
: 祖国伟大蒸蒸日上
: 为猫还要申请绿卡?

avatar
s*t
10
是啊。信号不好,什么都抓瞎。信号同样差的情况下,sipdroid 这种还算是矮子里拔
将军的,因为 sipdroid 可以设定小码率的 audio codec。
grooveip 另一个感觉是比sipdroid耗电。
sipdroid 的设置比talkatone, grooveip稍微复杂点。其实也没得几步。算不得什么
cons。置于sipdroid 的界面,感觉还行吧。拨号可以和手机拨号软件共用,不需要单开sipdroid的
界面。没那么难用的样子。

【在 s*****a 的大作中提到】
: 搞到最后还是好wifi代表一切啊,
avatar
L*e
11
回去你就后悔吧

【在 p*****e 的大作中提到】
: 一起回去?
avatar
k*v
12
全都用过,最后还是CSipSimple最稳定,声音比较保真,没有发现回音
avatar
z*n
13
作为一个千老,我觉得我已经没有脸可以拉不下来了。
avatar
s*t
14
耗电量怎么样? 我看有人说 csipsimple 耗电大。

【在 k*v 的大作中提到】
: 全都用过,最后还是CSipSimple最稳定,声音比较保真,没有发现回音
avatar
s*a
15
一直不用sipdroid和csipsimple主要是因为:
1,要回拨,打个电话出去还要先等一会。
2,sip连上后,一个普通电话进来,gsm电话响,然后sip自己也响,最后还不能选择接
听sip的。
用groove ip时,程序默认groove ip连通时,接通groove ip。
不知道这两个问题现在改变了没有。

【在 s******t 的大作中提到】
: 耗电量怎么样? 我看有人说 csipsimple 耗电大。
avatar
c*l
16
先顶再阅
avatar
k*v
17
耗电我没考虑,只是手机在脸上时会暗下屏幕的

【在 s******t 的大作中提到】
: 耗电量怎么样? 我看有人说 csipsimple 耗电大。
avatar
r*t
18
能选接 sip 啊,也有办法不用回拨。

【在 s*****a 的大作中提到】
: 一直不用sipdroid和csipsimple主要是因为:
: 1,要回拨,打个电话出去还要先等一会。
: 2,sip连上后,一个普通电话进来,gsm电话响,然后sip自己也响,最后还不能选择接
: 听sip的。
: 用groove ip时,程序默认groove ip连通时,接通groove ip。
: 不知道这两个问题现在改变了没有。

avatar
j*g
19
Talkatone现在看是和grooveip一样方便,但是延时要比grooveip好不少。文中提到的有广告什么的是可以接受的
avatar
G*h
20
广告就广告吧,反正是听电话不是看电话

【在 z**********3 的大作中提到】
: talkatone确实品质好些 不过要按月收费
: 一般人groove lite就够用

avatar
s*t
21
没看懂第一点。
第二点,如果拨入号码是你的手机号,sip 不应该响。sip 连着你的gv号码。

【在 s*****a 的大作中提到】
: 一直不用sipdroid和csipsimple主要是因为:
: 1,要回拨,打个电话出去还要先等一会。
: 2,sip连上后,一个普通电话进来,gsm电话响,然后sip自己也响,最后还不能选择接
: 听sip的。
: 用groove ip时,程序默认groove ip连通时,接通groove ip。
: 不知道这两个问题现在改变了没有。

avatar
f*i
22
Anybody know of a Talkatone crack?
avatar
s*a
23
mark!
i am using sipdroid right now and it works pretty well under wifi.

screen
and

【在 f******i 的大作中提到】
: The solutions listed in the titles are all for Android.
: Talkatone is an IPhone port. I presume it is the way to go with IPhone.
: WP is a sad story.Theoretically the PBXes relay solution would work for WP
: if a generic SIP client can be found. However, none can be found so far.
: Even then, you will need to figure out a way to keep wifi alive under screen
: saver. Check off WP if free GV over wifi is your must-have.
: Here are the reviews of the solutions:
: ==========
: Groove IP:
: This is the simplest solution. Fire up the software, enter your gmail id and

avatar
l*r
24
how about 3/4G。

【在 s*******a 的大作中提到】
: mark!
: i am using sipdroid right now and it works pretty well under wifi.
:
: screen
: and

avatar
s*a
25
请问sipdroid第二条line可以用另外一个gv的号码吗?怎么设置呢?
我有两个gv号码,希望都能用sipdroid接打。

screen
and

【在 f******i 的大作中提到】
: The solutions listed in the titles are all for Android.
: Talkatone is an IPhone port. I presume it is the way to go with IPhone.
: WP is a sad story.Theoretically the PBXes relay solution would work for WP
: if a generic SIP client can be found. However, none can be found so far.
: Even then, you will need to figure out a way to keep wifi alive under screen
: saver. Check off WP if free GV over wifi is your must-have.
: Here are the reviews of the solutions:
: ==========
: Groove IP:
: This is the simplest solution. Fire up the software, enter your gmail id and

avatar
f*i
26
When sipdroid set up your PBXes, it creates an -200 extension with a
secret password to prevent you from using the account in other sip clients.
Unfortunately it also prevents you to use the PBXes account as the second
line in your sipdroid.
The remedy is easy. Log in to your PBXes and change the -200 extension
password to something you know. Then you can come and add <2nd sipid>-200:<
yourpassword> as your 2nd line. You can also use it in CSipSimple if you
like its phone UI. SipDroid's phone UI is horrendous. The speaker/mute are
hidden in the menu and the dial pad is in an other window.
I don't use CSipSimple mainly because it does not reconnect successully
after you lose/regain wifi connection. If you have poor connection, you will
miss calls.
SipDroid keeps connection under the poorest wifi.The phone will ring even
when there isn't enough bandwidth to maintain a call. It gives me at least a
chance to find another phone to call back.

【在 s*******a 的大作中提到】
: 请问sipdroid第二条line可以用另外一个gv的号码吗?怎么设置呢?
: 我有两个gv号码,希望都能用sipdroid接打。
:
: screen
: and

avatar
s*a
27
多谢你的解答!
根据你的提示,我觉得对我来说最简单的做法是,在手机上安装sipdroid两次,这样就
能分别生成两个不同的PBXes -200 extension帐户分别关联到我两个gv号码上。然后把第一个帐户的密码在PBXes网上改成我自己的密码,再在手机sipdroid上把这个帐户加成second line. 不知道我理解的对不对。。
ps. sipdroid的UI对我来说已经很好用了,它可以从手机自带的通讯录直接拨打,对我
来说已经是整合的很完美了。

a
.

【在 f******i 的大作中提到】
: When sipdroid set up your PBXes, it creates an -200 extension with a
: secret password to prevent you from using the account in other sip clients.
: Unfortunately it also prevents you to use the PBXes account as the second
: line in your sipdroid.
: The remedy is easy. Log in to your PBXes and change the -200 extension
: password to something you know. Then you can come and add <2nd sipid>-200:<
: yourpassword> as your 2nd line. You can also use it in CSipSimple if you
: like its phone UI. SipDroid's phone UI is horrendous. The speaker/mute are
: hidden in the menu and the dial pad is in an other window.
: I don't use CSipSimple mainly because it does not reconnect successully

avatar
N*k
28
大侠们谁来个sipdroid教程啊
avatar
s*t
29
我以前在另外一个帖子里回过一个。很简单的。

【在 N*******k 的大作中提到】
: 大侠们谁来个sipdroid教程啊
avatar
f*i
30
1.For security, you want to apply for a few spare gmail accounts for google
voice. Don't use your gmail accounts. On you PC...
1.1 Set up google voice acounts: log in to voice.google.com
1.2 Get a free phone number by following the pop up window
1.3 go to the setting and check Google Chat. The incoming mail will ring the
google chat if you are logged in to the gmail on your PC. All free android
google voice software take advantage of this by implementing a Google Chat
client to answer the incoming calls. You can uncheck you forwarding phone
number if you don't want the incoming calls to ring that phone.
1.4 Go over other settings to make sure they are the way you want.e.g. You
want to uncheck the forwarding of the text & voice mail to your email if you
already install google voice client on your phone.
2. Generate PBXes.org relay accounts.
2.1 On your phone, go to play store, download and run SipDroid.
2.2.SipDroid will offer to create a new PBXes.org account for your if none
of you lines is already set up. click that.
2.2 Enter a sip account id and password and click create. I would just use
the GV phone number as sip account id. This is important because the sip
account id will show up in the android notification. Using the phone number
as id and you don't have to remember the id->phone number mapping.Remember
to use a password that is different than your google password.
2.3 The account creation will take a minute or so. PBXes.org will send you a
welcome email when is done.
2.4 On you PC, log in to PBX.org to set up the account. You will see a crap
load of settings. Don't touch any of them. You need to set the Trunk (google
side) and Extension (Android side)
2.5 Click Trunk, A drop down will show a single Trunk GTALK/[email protected]
gmail.com. Click on it and change the Gmail acount to one of the google
voice accounts you created in step1, fill in the correct gmail password. You
are sharing your gmail account with PBXes.org here, this is why you don't
want to use your main gmail account here!!! This trunk set up the connection
between PBXes and GV.
2.6 Click Extention: A dropdown will show a -200 extension. This
extension is the connection between PBXes and your phone. The extension has
a SipDroid created secret password. Change the password to something you
know. Click submit. A red page header will show up to ask you to confirm.
Click it to confirm.
2.7 you are done with PBXes.org relay accounts.You can use this account in
any sip client. The credentials:
Server: PBXes.org
username: -200 (Yes, use the extension!!)
password:
3. SipDroid would have set up line 1 while setting up the PBXes.org account.
Change the password to the one you entered in step 2.7 and you are good to
go.
4. CSipSimple will pop a list of providers upon the first launch. Look for
PBXes.org under the Internation drop down.
5. To create a second PBXes.org account, you can either uninstall & install
SipDroid to make it forget about line 1. Or you can simply delete the
username of line one and go to manage application to force close it. Or even
simpler just go to manage application and delete data. Deleting data will
force close the app and turn it into a virgin. Follow step 2 to create the
second account. Use credentials you get in step 2.7 to set up line 2.
6. (For IQ>70 only)Step 2.6 is essential if you plan to do step 5. The
default secret SipDroid password for the sip extension will get lost during
step 5. You will need to do step 2.6 or else you won't be able to set line 1
and line 2 afterwards. Please do not come crying to me that the sip
extension is useless when you try to enter it by hand. The secret extension
password is NOT your main sip account password. :)

【在 N*******k 的大作中提到】
: 大侠们谁来个sipdroid教程啊
相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。