Abaqus: error with dynamic loading - 未名空间MITBBS历史存档

国际科技财经博客移民网络热点娱乐民生时事公众号

Redian新闻

>未名空间

>Computation - 科学计算

Abaqus: error with dynamic loading

Abaqus: error with dynamic loading# Computation - 科学计算

x*u2003-11-04 08:11

1 楼

hi, there
I'm now doing dynamic loading on a cube with a centeral hole. The
hole is filled with another material. I guess this should be a
nonlinear dynamics case so I used the implicit direct integration
for the analysis step. The step time is 0.5sec. The maximum
increments is 100. The following is definition in the keywords:
** ----------------------------------------------------------------
**
** STEP: Dynamical loading
**
*Step, name="Dynamical loading"
Dynamicl loading applied at the top su

d*b2003-11-04 08:11

2 楼

Change the minmum time step. Make sure your BC and loads are correct.

~~~~~~~~~~~~~1e-9

【在 x**u 的大作中提到】

: hi, there
: I'm now doing dynamic loading on a cube with a centeral hole. The
: hole is filled with another material. I guess this should be a
: nonlinear dynamics case so I used the implicit direct integration
: for the analysis step. The step time is 0.5sec. The maximum
: increments is 100. The following is definition in the keywords:
: ** ----------------------------------------------------------------
: **
: ** STEP: Dynamical loading
: **

x*u2003-11-04 08:11

3 楼

Yes. I have tried decrease the minimum step time to 1e-9 and standard works.
However, the total increments will be 0.5/1e-9=500 million. I have to wait for
several days for the results to come out! And I have 125 similar cases to run.
Now I tried linear perturbation and it can give me results in ten minutes. It
makes me think that my part structure is linear or in my case, linear
perturbation can approximate the result.
thanks.

【在 d*****b 的大作中提到】

: Change the minmum time step. Make sure your BC and loads are correct.
:
: ~~~~~~~~~~~~~1e-9