Redian新闻
>
Re: [转载] 关于在router后的机器上架设FTP的问题
avatar
Re: [转载] 关于在router后的机器上架设FTP的问题# Internet - 有缘千里一线牵
s*n
1
How to set 1-1 NAT for my ftp server in my router?
help...............
avatar
s*i
2
192.168.*.* is private IP and not visible on
the internet. no machine can reach your computer
by using that IP from out of your network.
you need to let people use your router external
IP. the router receives it then pass it to your
interanl machine.
avatar
s*n
3
这些都设了,用了external ip address, 我把port 21 Forward 到192。168。1。102上
。但是不管用
别人连,老是在list,然后就disconnected.

【在 s**********i 的大作中提到】
: 192.168.*.* is private IP and not visible on
: the internet. no machine can reach your computer
: by using that IP from out of your network.
: you need to let people use your router external
: IP. the router receives it then pass it to your
: interanl machine.

avatar
c*h
4
你设的是Passive还是Port?如果是Passive的话,你需要open的
可不止port 21。



【在 s*********n 的大作中提到】
: 这些都设了,用了external ip address, 我把port 21 Forward 到192。168。1。102上
: 。但是不管用
: 别人连,老是在list,然后就disconnected.

avatar
O*d
5
i have exactly the same problem, can't get the ftp working again. i am using
a netgear mr314 router, somebody mentioned to set up 1-1 NAT for the router,
but how to do that ne?

i did this too, only difference is i used a different port number and in the
router i forwarded that port to the desktop where the serv-u is running. then
i tried to connect to the ftp server at the 'port' mode, it doens't
work, wuwu
did you solve this problem yet?

【在 s**********i 的大作中提到】
: 192.168.*.* is private IP and not visible on
: the internet. no machine can reach your computer
: by using that IP from out of your network.
: you need to let people use your router external
: IP. the router receives it then pass it to your
: interanl machine.

avatar
O*d
6
ft, found this in a corner of the reference manual for the router
'
Local PCs must access the local server using the PCs’ local LAN address (192.168.0.33 in this
example). Attempts by local PCs to access the server using the external IP address
(172.16.1.23 in this example) will fail.
'

【在 O*****d 的大作中提到】
: i have exactly the same problem, can't get the ftp working again. i am using
: a netgear mr314 router, somebody mentioned to set up 1-1 NAT for the router,
: but how to do that ne?
:
: i did this too, only difference is i used a different port number and in the
: router i forwarded that port to the desktop where the serv-u is running. then
: i tried to connect to the ftp server at the 'port' mode, it doens't
: work, wuwu
: did you solve this problem yet?

avatar
O*d
7
but why? so the packet can't turn around and come back to the router once
it left or something? haha

【在 O*****d 的大作中提到】
: ft, found this in a corner of the reference manual for the router
: '
: Local PCs must access the local server using the PCs’ local LAN address (192.168.0.33 in this
: example). Attempts by local PCs to access the server using the external IP address
: (172.16.1.23 in this example) will fail.
: '

avatar
t*k
8
我以前这样设置是好用的
但现在不知怎么的
不好用了
会不会和我的IIS的FTP有充突?
IIS的FTP倒好用
奇怪啊
avatar
O*d
9
what is IIS ne? arh, can't take it no more, tried all kinds of combination, it
just does't work, i can only access it from my lan using the lan ip, but my
friend still can't connect it from outside using the wan ip, wuwu
//help~~~~~

【在 t********k 的大作中提到】
: 我以前这样设置是好用的
: 但现在不知怎么的
: 不好用了
: 会不会和我的IIS的FTP有充突?
: IIS的FTP倒好用
: 奇怪啊

相关阅读
logo
联系我们隐私协议©2024 redian.news
Redian新闻
Redian.news刊载任何文章,不代表同意其说法或描述,仅为提供更多信息,也不构成任何建议。文章信息的合法性及真实性由其作者负责,与Redian.news及其运营公司无关。欢迎投稿,如发现稿件侵权,或作者不愿在本网发表文章,请版权拥有者通知本网处理。