纽约州招Senior and entry level Battery Test Engineer# JobHunting - 待字闺中
r*i
1 楼
Senior Test Engineer (high-end)
Roles & Responsibilities:
• Development and operation of Li-ion battery assembly process
• Hands-on operation of aqueous and non-aqueous electrochemical
battery test equipment, interpretation of results and development of
operating parameters.
• Hands-on operation of diagnostic instruments such as
electrochemical impedance spectrometry, and performing test of thermal
cycling stability, mechanical durability, failure mode and hazard
identification.
• Data collection, analysis, documentation and report.
• Determine optimum operating conditions, design parameters of
battery packs, cell life and aging characteristics, and usage in dynamic
environment.
• Communicate and interact closely with other engineering staff
responsible for developing electrode materials, battery cells and packs,
including: new concept exploration, prototype units and working production
lines.
• Assist in the establishment of the R&D battery test labs, and the
development and documentation of standard operating procedures and safety
procedures for pilot process capabilities and analytical test capabilities
as needed.
• Establish appropriate calibration and maintenance programs and
schedules for test systems to ensure accuracy and repeatability of
measurements.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• Minimum 5 years of experience in battery or power electronics
design and operation, or production environment.
• Experience with advanced rechargeable lithium battery and polymer
battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of carbon, ceramic
and polymer materials preferred.
• High degree of mechanical aptitude and assembly skills preferred
• Able to work in a production environment and low humidity
environment as needed.
• Knowledge of quality control methods and techniques.
• Successful track record of delivering test results and
development goals accurately, on time and on budget.
Battery Development Engineer, R&D (entry)
Roles & Responsibilities:
• Hands-on fabrication of electrode materials and coatings.
• Hands-on operation of battery test equipment, interpret result
and prepare reports.
• Create and input test scripts for computer controlled automation
of tests.
• Assist in the establishment of the R&D battery test labs.
• Follow standard operating and safety procedures for battery test.
• Support other engineering staff as needed.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience with advanced rechargeable lithium battery
and polymer battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of film processing,
carbon, ceramic and polymer materials preferred.
Processing Engineer, R&D
Roles & Responsibilities:
• Hands-on fabrication and characterization of electrode slurries
and coatings.
• Evaluation and optimization of battery engineering techniques,
procedures and criteria.
• Conceptual designs of battery prototypes and process development
of prototype fabrication and test.
• Interfacing with customers in the context of prototype designs
and application development.
• Support other engineering staff as needed.
Requirements:
• B.S. or M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience in chemical or industrial process or
equipment design.
• Knowledge of advanced batteries, film processing, carbon, ceramic
and polymer materials preferred.
如果有兴趣请站内询问邮箱发送简历，谢谢！
Roles & Responsibilities:
• Development and operation of Li-ion battery assembly process
• Hands-on operation of aqueous and non-aqueous electrochemical
battery test equipment, interpretation of results and development of
operating parameters.
• Hands-on operation of diagnostic instruments such as
electrochemical impedance spectrometry, and performing test of thermal
cycling stability, mechanical durability, failure mode and hazard
identification.
• Data collection, analysis, documentation and report.
• Determine optimum operating conditions, design parameters of
battery packs, cell life and aging characteristics, and usage in dynamic
environment.
• Communicate and interact closely with other engineering staff
responsible for developing electrode materials, battery cells and packs,
including: new concept exploration, prototype units and working production
lines.
• Assist in the establishment of the R&D battery test labs, and the
development and documentation of standard operating procedures and safety
procedures for pilot process capabilities and analytical test capabilities
as needed.
• Establish appropriate calibration and maintenance programs and
schedules for test systems to ensure accuracy and repeatability of
measurements.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• Minimum 5 years of experience in battery or power electronics
design and operation, or production environment.
• Experience with advanced rechargeable lithium battery and polymer
battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of carbon, ceramic
and polymer materials preferred.
• High degree of mechanical aptitude and assembly skills preferred
• Able to work in a production environment and low humidity
environment as needed.
• Knowledge of quality control methods and techniques.
• Successful track record of delivering test results and
development goals accurately, on time and on budget.
Battery Development Engineer, R&D (entry)
Roles & Responsibilities:
• Hands-on fabrication of electrode materials and coatings.
• Hands-on operation of battery test equipment, interpret result
and prepare reports.
• Create and input test scripts for computer controlled automation
of tests.
• Assist in the establishment of the R&D battery test labs.
• Follow standard operating and safety procedures for battery test.
• Support other engineering staff as needed.
Requirements:
• M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience with advanced rechargeable lithium battery
and polymer battery technologies strongly preferred.
• Knowledge of advanced batteries. Familiarity of film processing,
carbon, ceramic and polymer materials preferred.
Processing Engineer, R&D
Roles & Responsibilities:
• Hands-on fabrication and characterization of electrode slurries
and coatings.
• Evaluation and optimization of battery engineering techniques,
procedures and criteria.
• Conceptual designs of battery prototypes and process development
of prototype fabrication and test.
• Interfacing with customers in the context of prototype designs
and application development.
• Support other engineering staff as needed.
Requirements:
• B.S. or M.S. Degree or equivalent in an engineering discipline.
• 2+ years of experience in chemical or industrial process or
equipment design.
• Knowledge of advanced batteries, film processing, carbon, ceramic
and polymer materials preferred.
如果有兴趣请站内询问邮箱发送简历，谢谢！