s*y
2 楼
大家分析了半天，两个差价100，显然是上5S比较划算。但正是因为如此，为了color而
买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
boss。
买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
boss。
l*o
3 楼
I have the following problem. I want to introduce a point mutation to my
plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
XbaI and then ligate it to another vector. After introducing mutation with
mutagenesis kit, the sequencing result is as expected.
Next step is to put the XbaI-XbaI fragment containing the mutation back
into the original clone. After ligation and transformation with DH5alpha I
get a number of colonies (~20) but no colonies in the negative control. By
PCR with a internal primer& vector primer I did confirm the fragment is in
the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
So I midi-prep DNA and test the expression. Unfortunately, no expression at
all (positive control works well).
So I suspect some sort of genomic recombination took place in the Ecolis
since this plasmid is very big. Then the whole cDNA is not in frame. But I
never experienced this problem. If anyone of you experienced a similar
problem and has has any suggestions as to how to address this problem, your
help is greatly appreciated.
Will it reduce the recombination if I grow Ecoli in low temperature(~30
Celcius)?
Thank you!!
plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
XbaI and then ligate it to another vector. After introducing mutation with
mutagenesis kit, the sequencing result is as expected.
Next step is to put the XbaI-XbaI fragment containing the mutation back
into the original clone. After ligation and transformation with DH5alpha I
get a number of colonies (~20) but no colonies in the negative control. By
PCR with a internal primer& vector primer I did confirm the fragment is in
the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
So I midi-prep DNA and test the expression. Unfortunately, no expression at
all (positive control works well).
So I suspect some sort of genomic recombination took place in the Ecolis
since this plasmid is very big. Then the whole cDNA is not in frame. But I
never experienced this problem. If anyone of you experienced a similar
problem and has has any suggestions as to how to address this problem, your
help is greatly appreciated.
Will it reduce the recombination if I grow Ecoli in low temperature(~30
Celcius)?
Thank you!!
n*e
4 楼
图在这，谢谢！
【在 n*****e 的大作中提到】
: 如图
【在 n*****e 的大作中提到】
: 如图
T*n
5 楼
boss比小鬼还cheap反天理了吧
买5c，当boss的当然是果子，你不过是个杠头
【在 s********y 的大作中提到】
: 大家分析了半天，两个差价100，显然是上5S比较划算。但正是因为如此，为了color而
: 买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
: boss。
买5c，当boss的当然是果子，你不过是个杠头
【在 s********y 的大作中提到】
: 大家分析了半天，两个差价100，显然是上5S比较划算。但正是因为如此，为了color而
: 买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
: boss。
o*u
6 楼
这个挺常见的。特别是做了突变后，有可能导致质粒带毒。所以e.coli会启动某种
rescue，然后你的质粒就被搞的乱七八糟的了。
我没有什么好的方法解决。只有case by case的一点点试条件。祝好运。
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
rescue，然后你的质粒就被搞的乱七八糟的了。
我没有什么好的方法解决。只有case by case的一点点试条件。祝好运。
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
T*m
7 楼
像野葡萄。
【在 n*****e 的大作中提到】
: 如图
【在 n*****e 的大作中提到】
: 如图
a*y
8 楼
说不定每台5c苹果赚的钱不比5s少
所以是隐藏boss
★ 发自iPhone App: ChineseWeb 7.8
【在 T****n 的大作中提到】
: boss比小鬼还cheap反天理了吧
: 买5c，当boss的当然是果子，你不过是个杠头
所以是隐藏boss
★ 发自iPhone App: ChineseWeb 7.8
【在 T****n 的大作中提到】
: boss比小鬼还cheap反天理了吧
: 买5c，当boss的当然是果子，你不过是个杠头
h*e
9 楼
先测个序吧
30度会减少重组
或者用其他的E。 coli Host
30度会减少重组
或者用其他的E。 coli Host
n*e
10 楼
谢谢！看来不是什么好东西，得砍了。
【在 T*******m 的大作中提到】
: 像野葡萄。
【在 T*******m 的大作中提到】
: 像野葡萄。
T*n
11 楼
拜托，价钱低还被别人狂赚的不叫boss，叫凯子
【在 a***y 的大作中提到】
: 说不定每台5c苹果赚的钱不比5s少
: 所以是隐藏boss
:
: ★ 发自iPhone App: ChineseWeb 7.8
【在 a***y 的大作中提到】
: 说不定每台5c苹果赚的钱不比5s少
: 所以是隐藏boss
:
: ★ 发自iPhone App: ChineseWeb 7.8
n*k
12 楼
make sure it is what you said, if yes, may consider to change bacteria
strains, look for those which can overexpression long repeats DNA, or
inverted repeats, or for retro and lenti viral stuff...essentially those
lost RecABCD, not the only the RecA as the typical strains..if it is true,
this kind of cloning work is not trivial until you figure out right
materials...Or you could beat the nature by brutal force, I heard a guy
picked 20K clones to get one construct/plasmid done, that was before we know
the long repeats DNA cloning problems(bateria people always knew it much
earlier though)...I was completely dumbfounded! But it worked out for him
and beautifully...
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
strains, look for those which can overexpression long repeats DNA, or
inverted repeats, or for retro and lenti viral stuff...essentially those
lost RecABCD, not the only the RecA as the typical strains..if it is true,
this kind of cloning work is not trivial until you figure out right
materials...Or you could beat the nature by brutal force, I heard a guy
picked 20K clones to get one construct/plasmid done, that was before we know
the long repeats DNA cloning problems(bateria people always knew it much
earlier though)...I was completely dumbfounded! But it worked out for him
and beautifully...
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
a*y
13 楼
你理解错了。
5c是苹果赚钱boss
所以主力推广。
【在 T****n 的大作中提到】
: 拜托，价钱低还被别人狂赚的不叫boss，叫凯子
5c是苹果赚钱boss
所以主力推广。
【在 T****n 的大作中提到】
: 拜托，价钱低还被别人狂赚的不叫boss，叫凯子
r*r
14 楼
1. use C41 E. coli, which is BL21 derivative. remember to use plasmid
purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
, the copy number of your plasmids would be kept relatively low and thus the
"toxicity" might pose less negative effects on right colonies. C41 is also
used to express "toxic" proteins very often.
2. use lower antibiotics in 2YT plates for C41.
3. incubate at room-temperature. Large and toxic plasmids always take 2 days
to form colonies. Colonies appeared overnight always contain wrong plasmids.
btw, did u check the integrity of your plasmid?
purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
, the copy number of your plasmids would be kept relatively low and thus the
"toxicity" might pose less negative effects on right colonies. C41 is also
used to express "toxic" proteins very often.
2. use lower antibiotics in 2YT plates for C41.
3. incubate at room-temperature. Large and toxic plasmids always take 2 days
to form colonies. Colonies appeared overnight always contain wrong plasmids.
btw, did u check the integrity of your plasmid?
T*n
15 楼
你仔细看看楼主的原帖
他的理论买5c才是高富帅是boss
【在 a***y 的大作中提到】
: 你理解错了。
: 5c是苹果赚钱boss
: 所以主力推广。
他的理论买5c才是高富帅是boss
【在 a***y 的大作中提到】
: 你理解错了。
: 5c是苹果赚钱boss
: 所以主力推广。
n*k
16 楼
thank you!!
Question1: So large plasmid always behave this way or not? the biggest one I
worked was 20kb, it was ok with typical condition.
Question2: so cosmids or Yac/Bac don't follow the same way as they have
multiple rep origisns, right?
background
the
also
days
plasmids.
【在 r****r 的大作中提到】
: 1. use C41 E. coli, which is BL21 derivative. remember to use plasmid
: purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
: , the copy number of your plasmids would be kept relatively low and thus the
: "toxicity" might pose less negative effects on right colonies. C41 is also
: used to express "toxic" proteins very often.
: 2. use lower antibiotics in 2YT plates for C41.
: 3. incubate at room-temperature. Large and toxic plasmids always take 2 days
: to form colonies. Colonies appeared overnight always contain wrong plasmids.
: btw, did u check the integrity of your plasmid?
Question1: So large plasmid always behave this way or not? the biggest one I
worked was 20kb, it was ok with typical condition.
Question2: so cosmids or Yac/Bac don't follow the same way as they have
multiple rep origisns, right?
background
the
also
days
plasmids.
【在 r****r 的大作中提到】
: 1. use C41 E. coli, which is BL21 derivative. remember to use plasmid
: purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
: , the copy number of your plasmids would be kept relatively low and thus the
: "toxicity" might pose less negative effects on right colonies. C41 is also
: used to express "toxic" proteins very often.
: 2. use lower antibiotics in 2YT plates for C41.
: 3. incubate at room-temperature. Large and toxic plasmids always take 2 days
: to form colonies. Colonies appeared overnight always contain wrong plasmids.
: btw, did u check the integrity of your plasmid?
s*y
17 楼
开个玩笑 那么认真干嘛
r*r
18 楼
1. It depends on what genes were in your plasmids. for example, it is ok to
manipulate some DNA viruses with large genome using conventional cloning
method but when it comes to some RNA viruses, you can't even clone its
fragments more than 3K.
2. I have no experience on Cosmid/YAC/BAC.
I
【在 n********k 的大作中提到】
: thank you!!
: Question1: So large plasmid always behave this way or not? the biggest one I
: worked was 20kb, it was ok with typical condition.
: Question2: so cosmids or Yac/Bac don't follow the same way as they have
: multiple rep origisns, right?
:
: background
: the
: also
: days
manipulate some DNA viruses with large genome using conventional cloning
method but when it comes to some RNA viruses, you can't even clone its
fragments more than 3K.
2. I have no experience on Cosmid/YAC/BAC.
I
【在 n********k 的大作中提到】
: thank you!!
: Question1: So large plasmid always behave this way or not? the biggest one I
: worked was 20kb, it was ok with typical condition.
: Question2: so cosmids or Yac/Bac don't follow the same way as they have
: multiple rep origisns, right?
:
: background
: the
: also
: days
h*z
19 楼
俺觉的5c最适合给孩子们和二十刚出头的小年轻们用，便宜一百，颜色鲜艳。打算给俺
家的少爷小姐这次都换成5c. 刚刚家里zt还批评我，说我去年给他们一人配了一个5代
touch,这次又买5c,touch又没用了。
【在 s********y 的大作中提到】
: 大家分析了半天，两个差价100，显然是上5S比较划算。但正是因为如此，为了color而
: 买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
: boss。
家的少爷小姐这次都换成5c. 刚刚家里zt还批评我，说我去年给他们一人配了一个5代
touch,这次又买5c,touch又没用了。
【在 s********y 的大作中提到】
: 大家分析了半天，两个差价100，显然是上5S比较划算。但正是因为如此，为了color而
: 买比较‘不划算’的5C的人不才是不差钱的吗。所以说实际上5S才是屌丝机，5C是隐藏
: boss。
e*s
20 楼
I would check plasmid and expression more carefully before draw a conclusion
of genomic recombination.
1. Have you check the whole 4kb cDNA after site-direct mutagenesis? It will
take you 5 sequencing to check the whole cDNA.
2. How do you check the expression? Have you check both supernatant and
total lysis? by western or just SDS-PAGE. The point is single mutant could
dramatically decrease the expression.
3. Purify plasmid from the expression E.coli, do cutting test and send for
sequencing.
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
of genomic recombination.
1. Have you check the whole 4kb cDNA after site-direct mutagenesis? It will
take you 5 sequencing to check the whole cDNA.
2. How do you check the expression? Have you check both supernatant and
total lysis? by western or just SDS-PAGE. The point is single mutant could
dramatically decrease the expression.
3. Purify plasmid from the expression E.coli, do cutting test and send for
sequencing.
with
at
【在 l******o 的大作中提到】
: I have the following problem. I want to introduce a point mutation to my
: plasmid. The plasmid is super big. So I first cut out a fragment(~4kb) with
: XbaI and then ligate it to another vector. After introducing mutation with
: mutagenesis kit, the sequencing result is as expected.
: Next step is to put the XbaI-XbaI fragment containing the mutation back
: into the original clone. After ligation and transformation with DH5alpha I
: get a number of colonies (~20) but no colonies in the negative control. By
: PCR with a internal primer& vector primer I did confirm the fragment is in
: the plasmid. Meanwhile, the orientation can also be confirmed by this PCR.
: So I midi-prep DNA and test the expression. Unfortunately, no expression at
S*t
21 楼
5C肯定赚得比5S多，那个套子都转30块呢
l*o
22 楼
Thank you all for the kind reply.
1. I did not check the whole 4kb cDNA after site-direct mutagenesis. I sent
it for sequencing yesterday.
2. After screening positive colonies by PCR, I midi-prep DNA and transfect
into mammalian cells. After 24h, cells were harvested and directly boiled
with sample buffer. I run SDS-PAGE and probed the membrane with Ab against
the epitope. The original clone got good expression.
3. I cut the original clone with XbaI (see the following agarose gel photo).
The 4kb DNA can be released successfully. But it is very weird with the new
construct.
conclusion
will
【在 e****s 的大作中提到】
: I would check plasmid and expression more carefully before draw a conclusion
: of genomic recombination.
: 1. Have you check the whole 4kb cDNA after site-direct mutagenesis? It will
: take you 5 sequencing to check the whole cDNA.
: 2. How do you check the expression? Have you check both supernatant and
: total lysis? by western or just SDS-PAGE. The point is single mutant could
: dramatically decrease the expression.
: 3. Purify plasmid from the expression E.coli, do cutting test and send for
: sequencing.
:
1. I did not check the whole 4kb cDNA after site-direct mutagenesis. I sent
it for sequencing yesterday.
2. After screening positive colonies by PCR, I midi-prep DNA and transfect
into mammalian cells. After 24h, cells were harvested and directly boiled
with sample buffer. I run SDS-PAGE and probed the membrane with Ab against
the epitope. The original clone got good expression.
3. I cut the original clone with XbaI (see the following agarose gel photo).
The 4kb DNA can be released successfully. But it is very weird with the new
construct.
conclusion
will
【在 e****s 的大作中提到】
: I would check plasmid and expression more carefully before draw a conclusion
: of genomic recombination.
: 1. Have you check the whole 4kb cDNA after site-direct mutagenesis? It will
: take you 5 sequencing to check the whole cDNA.
: 2. How do you check the expression? Have you check both supernatant and
: total lysis? by western or just SDS-PAGE. The point is single mutant could
: dramatically decrease the expression.
: 3. Purify plasmid from the expression E.coli, do cutting test and send for
: sequencing.
:
v*e
23 楼
I won't be surprised if the gross margin on 5C ends up higher than that on
5S.but of course, they will never release that kind of information.
【在 a***y 的大作中提到】
: 说不定每台5c苹果赚的钱不比5s少
: 所以是隐藏boss
:
: ★ 发自iPhone App: ChineseWeb 7.8
5S.but of course, they will never release that kind of information.
【在 a***y 的大作中提到】
: 说不定每台5c苹果赚的钱不比5s少
: 所以是隐藏boss
:
: ★ 发自iPhone App: ChineseWeb 7.8
l*o
24 楼
我想问的是，如果要减少重组，降低温度。涂板后就要放在低温（～30）incubate？还
是从liquid culture那步才需要30度？
background
the
also
days
plasmids.
【在 r****r 的大作中提到】
: 1. use C41 E. coli, which is BL21 derivative. remember to use plasmid
: purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
: , the copy number of your plasmids would be kept relatively low and thus the
: "toxicity" might pose less negative effects on right colonies. C41 is also
: used to express "toxic" proteins very often.
: 2. use lower antibiotics in 2YT plates for C41.
: 3. incubate at room-temperature. Large and toxic plasmids always take 2 days
: to form colonies. Colonies appeared overnight always contain wrong plasmids.
: btw, did u check the integrity of your plasmid?
是从liquid culture那步才需要30度？
background
the
also
days
plasmids.
【在 r****r 的大作中提到】
: 1. use C41 E. coli, which is BL21 derivative. remember to use plasmid
: purification kit that can eliminate ENDONUCLEASE. Due to its BL21 background
: , the copy number of your plasmids would be kept relatively low and thus the
: "toxicity" might pose less negative effects on right colonies. C41 is also
: used to express "toxic" proteins very often.
: 2. use lower antibiotics in 2YT plates for C41.
: 3. incubate at room-temperature. Large and toxic plasmids always take 2 days
: to form colonies. Colonies appeared overnight always contain wrong plasmids.
: btw, did u check the integrity of your plasmid?
r*r
25 楼
Keep at RT in all steps.
BTW, from your gel image, it seems like your XbaI sites were gone in new
construct.
【在 l******o 的大作中提到】
: 我想问的是，如果要减少重组，降低温度。涂板后就要放在低温（～30）incubate？还
: 是从liquid culture那步才需要30度？
:
: background
: the
: also
: days
: plasmids.
BTW, from your gel image, it seems like your XbaI sites were gone in new
construct.
【在 l******o 的大作中提到】
: 我想问的是，如果要减少重组，降低温度。涂板后就要放在低温（～30）incubate？还
: 是从liquid culture那步才需要30度？
:
: background
: the
: also
: days
: plasmids.
e*s
26 楼
I see.
Apparently, your new constructs are just not right based on your digestion
tests, which explains the expression problem.
Digestion tests is always better than PCR to confirm the subcloning
constructs.
I only sequence samples after digestion tests.
Sometimes I struggle with the ligation of big constructs as well.
Good luck!
sent
).
new
【在 l******o 的大作中提到】
: Thank you all for the kind reply.
: 1. I did not check the whole 4kb cDNA after site-direct mutagenesis. I sent
: it for sequencing yesterday.
: 2. After screening positive colonies by PCR, I midi-prep DNA and transfect
: into mammalian cells. After 24h, cells were harvested and directly boiled
: with sample buffer. I run SDS-PAGE and probed the membrane with Ab against
: the epitope. The original clone got good expression.
: 3. I cut the original clone with XbaI (see the following agarose gel photo).
: The 4kb DNA can be released successfully. But it is very weird with the new
: construct.
Apparently, your new constructs are just not right based on your digestion
tests, which explains the expression problem.
Digestion tests is always better than PCR to confirm the subcloning
constructs.
I only sequence samples after digestion tests.
Sometimes I struggle with the ligation of big constructs as well.
Good luck!
sent
).
new
【在 l******o 的大作中提到】
: Thank you all for the kind reply.
: 1. I did not check the whole 4kb cDNA after site-direct mutagenesis. I sent
: it for sequencing yesterday.
: 2. After screening positive colonies by PCR, I midi-prep DNA and transfect
: into mammalian cells. After 24h, cells were harvested and directly boiled
: with sample buffer. I run SDS-PAGE and probed the membrane with Ab against
: the epitope. The original clone got good expression.
: 3. I cut the original clone with XbaI (see the following agarose gel photo).
: The 4kb DNA can be released successfully. But it is very weird with the new
: construct.
r*r
27 楼
Indeed, it's more difficult to manipulate big constructs than small
constructs with ligation method. So sometimes I used yeast recombination to
handle big constructs. The drawback of using yeast is the high mutation rate
. I always have to use several independent clones to confirm my observation
was really due to my mutations instead of random mutations caused by yeast.
【在 e****s 的大作中提到】
: I see.
: Apparently, your new constructs are just not right based on your digestion
: tests, which explains the expression problem.
: Digestion tests is always better than PCR to confirm the subcloning
: constructs.
: I only sequence samples after digestion tests.
: Sometimes I struggle with the ligation of big constructs as well.
: Good luck!
:
: sent
constructs with ligation method. So sometimes I used yeast recombination to
handle big constructs. The drawback of using yeast is the high mutation rate
. I always have to use several independent clones to confirm my observation
was really due to my mutations instead of random mutations caused by yeast.
【在 e****s 的大作中提到】
: I see.
: Apparently, your new constructs are just not right based on your digestion
: tests, which explains the expression problem.
: Digestion tests is always better than PCR to confirm the subcloning
: constructs.
: I only sequence samples after digestion tests.
: Sometimes I struggle with the ligation of big constructs as well.
: Good luck!
:
: sent
l*o
28 楼
problem solved!!!! I got the right construct!!!!
Every steps were performed in 30 degree except heat shock (42 degree).
Thank you all!!!!
Every steps were performed in 30 degree except heat shock (42 degree).
Thank you all!!!!
相关阅读
哈佛科学家体外培养出跳动的人造心脏！神奇！惊叹！ (转载)paper help国产学术期刊《细胞研究》创造奇迹full article wanted, Thanks!小生物公司面试着装打听一下MSKCC的Eric LaiCHIP后DNA的260/280很低，怎么办？韩春雨的NgAgo幻影的破灭新泽西中部 Bio-tech startup 公司招聘客户经理施一公：中国大学及研究所科研是为西方免费劳动 (转载)请教：Patient-Derived Xenograft可以做基因knockdown或者over expression实验吗？return to Shanghai, what and how to request benifits?paper thanks【生物转行最成功】女明星在哈佛毕业演讲！诚求审稿 （生物医学工程， 血管力学，超声，有限元模拟）用什么引物能够直接从RNA里把一个基因给扩出来？paper thankssci3分杂志转让审稿：细胞周期，分子生物 (gone)Paper help!Ron Vale 这真是在Cell上灌水啊！